Shop for all in Measuring equipment repair and maintenance

Availability: This item is usually despatched same day The ZB8T is one of the most powerful and technologically advanced flashlights in the Zweibrder range, combining high power, advanced focusing options, intuitive controls, and robust construction, making it suitable for outdoor enthusiasts as wel...

AVAILABILITY: This item is usually dispatched same day The Core W12 Soil Impact Tester is a quick, non-invasive device used to verify uniform soil compaction across large job sites. The Core W12 Soil Impact Tester can identify poorly compacted areas, allowing ground work issues to be remedied as the...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This ex-demo staff is in 9/10 condition (photos are generic and not of the actual item). 6 section, 7.6 meter telescopic fibreglass staff with surveyors E-Face 10mm graduation and a height...

AVAILABILITY: This item is usually dispatched same day The Trilex MET-Y02 breaks the barrier between cost and a top quality theodolite. 10 second accuracy makes the Trilex MET-Y02 ideal for building, construction, contracting and set out. We have selected this instrument over many other brands, as i...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This tribrach is in near new condition as pictured. The best quality tribrach available. Complete with bulls eye bubble, smooth accurate clamping and an optical plummet for precise setup o...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This tribrach is in near new condition as pictured. The best quality tribrach available. Complete with bulls eye bubble, smooth accurate clamping and an optical plummet for precise setup o...

AVAILABILITY: This item is usually dispatched same day The Crains Stedi-Rest, a clever multi purpose tool that can act as a rod/pole rest to keep your gear off the ground when not in use, you can put it on a tripod to help rotate your pole to adjust the bubble or even use it to create a bipod to hol...

AVAILABILITY: This item is usually dispatched same day Even stronger than the original case, these after-market, reinforced transport road cases have a plywood core to help prevent the handle and latches from tearing out when the case has been wet or damaged. Fits most models of 4.5kg SDI Clegg Soil...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This moisture meter is in good condition as pictured. The world's original and best-selling dual-function moisture meter with both pin and non-invasive measurement capabilities. This versa...

AVAILABILITY: This item is usually dispatched same day The all new re-designed Trilex DT-02 breaks the barrier between cost and a top quality water resistant theodolite. 12 second accuracy makes the Trilex DT-02 ideal for building, construction, contracting and set out. We have selected this instrum...

AVAILABILITY: This item is usually dispatched same day Replacement bubble assembly, complete with mounting screws to fit the Topcon Laser Receiver Holder 6 sensor clamp. FEATURES: - Comes complete with mounting screws - Double sided bubble vial for viewing from above and below SPECIFICATIONS: - Suit...

AVAILABILITY: This item is usually dispatched same day Replacement square style button for Myzox level staves. These spring loaded locking buttons are a direct replacement for Myzox level staves with MG-04 printed on the original buttons. Not compatible with other brands or models. FEATURES: - High...

AVAILABILITY: This item is usually dispatched same day Replacement square style button for Myzox level staves. These spring loaded locking buttons are a direct replacement for Myzox level staves with MG-02 or MG-02A printed on the original buttons. Not compatible with other brands or models. FEATURE...

Availability: This item is usually despatched same day Connect your Forerunner 405/310XT to this charging clip, which has a USB plug for convenient charging of your watch via your computer. FEATURES: - Standard USB Plug

AVAILABILITY: This item is usually dispatched same day This is a clearance product with limited stock available. An economy priced 6 section, 7.6 meter telescopic fibreglass staff with surveyors E-Face 10mm graduation and a height scale on the back. Constructed from tough, rigid fibreglass with rein...

AVAILABILITY: This item is usually dispatched same day The Leica Style GMP111-0 is a zero constant mini prism, mounted in polymer holder with 1/4" thread fittings. With an in-built circular bubble, the set comes complete with a four-section pole and point that expand your surveying capabilities. INC...

AVAILABILITY: This item is usually dispatched same day Stainless steel adapter, M8 male thread to standard survey male 5/8x11. FEATURES: - Stainless steel SPECIFICATIONS: - Lower thread: 8mm male - Upper thread: 5/8x11 male - Construction: Stainless Steel - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day With all the features of GMEs AccuSat MT610G, but with the addition of "Return Link Service". This service allows the PLB user to receive a confirmation signal back after their distress alert has been received and their location has been detecte...

AVAILABILITY: This item is usually dispatched same day Replacement Topcon Legs (sold individually) for TP-L3, TP-L4, TP-L5 and TP-L6 models. Each foot is machined metal with a rubber end cap for grip and stability. Available to suite 150, 200, 250 and 300mm pipe centring. FEATURES: - Enables precise...

AVAILABILITY: This item is usually dispatched same day Replacement Li-Ion Battery for Nedo X-Liner 3D laser levels (also suits a number of other brands and models). FEATURES: - 7.4V - 2,600 mAh SPECIFICATIONS: - Suits models: - Nedo: X-Liner 3DR - Huepar: 603CG / 603CR / 602CG / 602CR - Spot-on: Las...

AVAILABILITY: This item is usually dispatched same day Replacement mains AC/DC power adapter for Spot-on Powerline 3DR MKII / 3DG model laser levels. FEATURES: - Plug-in wall power supply SPECIFICATIONS: - Suits: Spot-on Powerline 3DR MKII / 3DG - Input: 100-240V~, 50-60Hz - Output: 5V DC, 2000mA -...

AVAILABILITY: This item is usually dispatched same day Replacement battery charger for Stonex R15/R35 total stations. FEATURES: - High quality plug-in wall charger SPECIFICATIONS: - Suits Models: Stonex R15 R35 - Input: 100-240V~, 50-60Hz - Output: 8.4V DC, 2A - Wall plug: NZ/Australia - Warranty: 9...

AVAILABILITY: This item is usually dispatched in 2-3 days Pair of genuine GE Protimeter BLD5070 EIFS Probe replacement screw in needles. SPECIFICATIONS: - Total Length: 130mm - Tip to base of shaft: 110mm

AVAILABILITY: This item is usually dispatched same day Make installing track, lighting and ceilings easier and more accurate by attaching your X-Liner laser directly to the wall. If the work site is just too busy to risk your laser getting knocked over, then just put it up on the wall out of harms w...