Shop for all in Internet web site design service

Home Audits Snap Mini Audit Snap Mini Audit Your marketing is either working or it isnt. The $95 Mini Audit tells you exactly which. Once you purchase, well give you a quick call to find out a bit more about your business before we dive in. Then well review your website, social media, Google Busines...

NZR / Tranz Metro EM/ET Ganz-Mavag EMU or units". Classic Wellington trains from the early 1980s through to the 2010s. The Ganz-Mavag units were built in communist Hungary, with electrical equipment supplied by GEC. Comes with bogies (not shown). Scale is NZ120 (1:120 or TT scale) for 9mm gauge

NZR / Tranz Metro DM/D English Electric EMU or units". Classic Wellington trains from the 1940s through to the 2000s. The units were built by English Electric and introduced in tranches. This model represents the units as introduced in the 1950s. Comes with bogies (not shown). Optional additional

NZR EW class locomotive (shell) in 1:120 scale (NZ120). The EW class locomotive was introduced in 1952. these powerful articulated electric locomotives were used in the Wellington region (hence the classification EW"). Comes with three bogies. Scale is NZ120 (1:120 or TT scale) for 9mm gauge

Toshiba EO class locomotive (shell) - NZ120 The EO (originally EA) class locomotives were introduced in 1968 for the Otira - Arthurs Pass section of the Midland Line, which consists of the Otira Tunnel. The locomotives replaced the older EO class built by English Electric, which had been in serv

The EF class electric locomotives were introduced from 1986 on the North Island Main Trunk electrification scheme. Originally classified Class 30", the locomotives are now the only mainline electric locomotives in New Zealand. 3D print consists of the shell and bogie side frames. Design by P

Roco TT Left-hand turnout WL10. Length 193 mm (= G128 G64), branch angle 10°, branch radius 758 mm. With integrated snap mechanism so the switch blades remain in contact with the selected position. The metal frog can be polarised together with the underbench electric solonoid

Roco TT Right-hand turnout WR10. Length 193 mm (= G128 G64), branch angle 10°, branch radius 758 mm. With integrated snap mechanism so the switch blades remain in contact with the selected position. The metal frog can be polarised together with than underbench electric solonoi

NZR 30ft F class guards van. Design is the 1950s steel-clad variant. Shell only, no chassis or bogies. Wheelsets are available from Trackgang Products. Scale is NZ120 (1:120) Design by Simon Lister, produced by 3 Foot 6 Models under license. Measurements: 82mm long x 21.5mm wide x 22.4mm high

The FM class were the last type of guards van introduced by NZR, from 1977. In 1987, NZR withdrew guards vans from service. As a result, the FM class were repurposed for many different uses. The FM class were unique with their modular design. This model represents the FM class as they were intro

NZR 56ft Main Trunk van. Includes underframe. Common sight on mainline passenger trains in both the North and South Islands up until the 1990s. Design by Simon Lister, produced by 3 Foot 6 Models. Available in NZ120 (1:120) scale. Measurements: NZ120: 145.57mm long x 25.42mm wide x 20.67mm hig

The AG class guards and luggage vans were converted from FM class guards vans. following the withdrawal of guards vans from all NZR goods services in 1987. This model is of AG130, which was modified for use on the Palmerston North - Wellington Capital Connection service. The model consists of

The AG class guards and luggage vans were converted from FM class guards vans. following the withdrawal of guards vans from all NZR goods services in 1987. This model is of the central (GM) module upgraded with a genset (generator) to provide power for passenger trains. The model consists of

The AG class guards and luggage vans were converted from FM class guards vans. following the withdrawal of guards vans from all NZR goods services in 1987. This is a model of the luggage generator" variation. The model consists of three modular parts and the underframe. More information a

The AG class guards and luggage vans were converted from FM class guards vans. following the withdrawal of guards vans from all NZR goods services in 1987. This is a model of the viewing" variation used on the Tranz Alpine. The model consists of three modular parts and the underframe. Mor

The AKV class guards and viewing vans were converted from FM class guards vans. to match KiwiRails new AK class carriages. The model consists of: Main shell Underframe 2x bogies (wheelsets not included) More information about the FM and AG class guards van on Wikipedia.

LC class four-wheel wagon. The LC class evolved from earlier L and LA highsider" wagons. Designed to fit a PECO NR-122 N 15ft WB Wagon Chassis with Steel Type Sole Bars. Model scale is NZ120 (1:120). Measurements: NZ120: 54.5mm long x 21mm wide x 12mm high Design by Simon Lister, produced

KP class four-wheel box wagon Scale is NZ120 (1:120 or TT scale) Wagon is designed to fit a PECO 15ft steel solebar chassis. Design by Simon Lister, produced under license by 3 Foot 6 Models. Measurements: NZ120: 54.35mm long x 21.80mm wide x 23.61mm high

KST class four-wheel box wagon The KST class were a variation of the KS class of four-wheel box wagons, with steel doors removed and replaced with tarpaulin curtainsides. Scale is NZ120 (1:120 or TT scale) Wagon is designed to fit a PECO 15ft steel solebar chassis. Design by Simon Lister, produ

CE class coal hopper wagon Introduced between the year 2000 and 2010 by Tranz Rail, these wagons represented a further evolution of coal hopper wagons on New Zealands railways. Largely confined to the Midland line coal circuit, these wagons remain in service today. The CE's were built at Hillside

KS class four-wheel box wagon The KS four-wheel box wagons were larger and more modern versions of the KP class box wagons, with steel doors and ribbed sides. Scale is NZ120 (1:120 or TT scale) Wagon is designed to fit a PECO 15ft steel solebar chassis. Design by Simon Lister, produced under lic

CW class coal hopper wagon in NZ120 (TT or 1:120 scale). The CW class of coal hopper wagons were introduced by Tranz Rail in 1995 as a stop-gap measure before larger CC class coal wagons entered service. The CWs were ex WAGR (Western Australia Government Railways) XBC wagons. The XBC wagons were or

NZR KP class steel box wagon. Consists of: The chassis, designed for HOn3.5 / HOnz 12mm gauge (note: not 16.5mm) The wagon proper 4x hooks and chains 2x brake hoses The chassis is designed to fit 30" 12mm gauge wheelsets. Designed by Neil Ward. produced under license by 3

NZR LA class four-wheel wagon - HOnz Consists of: The chassis, designed for HOn3.5 / HOnz 12mm gauge (note: not 16.5mm) The wagon proper 4x hooks and chains 2x brake hoses The chassis is designed to fit 12mm gauge wheelsets (can be added extra). Designed by Neil Ward

NZR LC class four-wheel wagon - HOnz Consists of: The chassis, designed for HOn3.5 / HOnz 12mm gauge (note: not 16.5mm) The wagon proper 4x hooks and chains 2x brake hoses The chassis is designed to fit 12mm gauge wheelsets (can be added extra) and HOn3 couplers (Kadee #714).

The UK class container wagon was first introduced in the late 1960s as containerisation of shipping was underway. The class grew as NZR added more and more batches of the wagons to its fleet, with numerous wagons built up from kitsets produced by Mitsubishi in Japan. At 60ft in length, the UK class

The US class flat bogie wagon was first introduced in the late 1960s. There are many variations to the US class that have been introduced over the years: USA - carbon dioxide wagon USB - steel coil wagon USC - cement wagon USD - bulk lime/flour container wagon USF - bulk flour contai

NZR ZM class bogie box wagon - NZ120 This model is in 1:120 (NZ120 or TT scale). Includes shell - bogies and couplers not included. Bogies Type 14 bogies (available via Trackgang Products ) Dimensions NZ120: 115.41mm long x 21.40mm wide x 25.35mm high Design by Peter Bryant (KiwiTrai

NZR W class four-wheel wooden box wagon in NZ120 scale. This model is in 1:120 (NZ120 or TT scale). Includes shell - wheelsets and couplers not included. Designed so you can just pop wheelsets into the print. Wheelsets Trackgang products wheelsets Dimensions NZ120: 115.41mm long x 21.40

Prototype Information A tank container or tanktainer is an intermodal container for the transport of liquids, gases and powders as bulk cargo. It is built to the ISO standards, makin

NZR ZA class bogie box wagon - HOnz This model is in 1:87 (HOnz or HO scale with 12mm track). Also available in NZ120 scale here. Optional extras are: 2x Type 14 bogies by SARMODEL 4x 30" NZR wheelsets 2x couplers, plus pockets 2x bogie screws 2x coupler screws ZA class design

A tank container or tanktainer is an intermodal container for the transport of liquids, gases and powders as bulk cargo. It is built to the ISO standards, making it suitable for different modes of transportation; as such, it is also called an ISO tank. Both hazardous and non-hazardous products can b...

20ft Hi-Cube refrigerated reefer" container, in HO scale (1:87) Material: ABS plastic Scale: 1:87 Product ships from China

As used on the BC class cement wagon and as standalone units for inter-modal cement or powder traffic. Scale is 1:87 (HO scale). Measurements: lhw HO scale: 30.86mm x 26.71 29.1 Design by Neil Ward, produced by 3 Foot 6 Models under licence

NZR EL class crane - NZ120 Modern diesel cranes delivered in 1980. Scale is NZ120 (1:120 or TT scale, also known as TT:120), designed to run on N scale track. Model comes in five parts: Cab unit Main crane unit Crane arms Runner wagons x2 Assembly instructions here. Chassis

NZR 5 ton steam crane - NZ120 Model of an NZR 5-ton steam crane - more detail here. Scale is NZ120 (1:120 or TT scale, also known as TT:120), designed to run on N scale track. Model comes in two parts: Cab unit and base chassis Boom, mount pad and bucket Chassis: Model requires 3x w

NZR type 14 bogie - HOnz Contains: Pair of bogies Accurate NZR 30" (762mm) wheelsets. D esigned for HOn3.5 / HOnz 12mm gauge (note: not 16.5mm). Design by Frank Collingwood (SARMODEL) sold under license by 3 Foot 6 Models. Scale is 1:87 (HO) designed for 12mm gauge track. Bogie wag

NZR type 16A bogie - HOnz D esigned for HOn3.5 / HOnz 12mm gauge (note: not 16.5mm). Accurate NZR 30" (762mm) wheelsets. Available with Type 16A or Type 16B. Design by Frank Collingwood (SARMODEL) produced under license by 3 Foot 6 Models. Scale is 1:87 (HO) designed for 12mm gauge

NZR type 18 bogie is a modern bogie design used on a number of high-capacity wagons introduced since the 1990s. HOnz bogies are supplied with wheelsets. Scales HOnz (HOn3.5 - 12mm gauge) at 1:87.1 scale (note: not 16.5mm) - using 3 Foot 6 Models wheelsets S (Sn3.5 - 16.5mm gauge) at

Queensland Railways 1400 class locomotive (shell) - designed for Frateschi chassis. Available with either searchlight headlights or no searchlight headlights. Please note prices are in NZD. The Frateschi G12 has a few design errors, this design corrects those errors for a more detailed, accurate m

NZR DC class locomotive designed for Frateschi DA or DC class chassis. The Frateschi DC class is not an accurate model; this shell by Neil Ward is far more accurate and compatible with the Frateschi chassis. Scale is 1:76 or OO gauge (16.5mm gauge track, standard HO or OO gauge track). OO scale ve

KiwiRails DL class mainline locomotive is now the mainstay of the North Islands fleet. First introduced in 2010, the locomotives are dual-cabbed and built by Chinese manufacturer CRRC Dalian. More specifications here. Includes bogie side-frames. The scale is 1:76 (OO scale) to fit a Frateschi

NZR DH class locomotive (replacement cab, cowcatchers and battery box) - designed to fit a Frateschi DH" locomotive - OO scale 3D prints of components, to replace the inaccurate parts that come with the original model. Pictures are of two completed models by Lewis Holden. Design by Peter Bryant

Prototype: KiwiRails DL class mainline locomotive is now the mainstay of KiwiRails North Island fleet. First introduced in 2010, the locomotives are dual-cabbed and built by Chinese manufacturer CRRC Dalian. More specifications here. The kit: This kit is produced in HOnz scale (HO scale o

Modern single-arm electric pantograph. Product ships from China

Electric traction pantograph - old style. Measurements: 40mm x 19mm x 7mm(L W H), Open size: 32mm x 16mm x 28mm (L W H),for HO scale train model of most brands on the market. Material: Metal alloy Scale: 1:87 Product ships from China

NZR EW class locomotive (shell) in 1:64 scale (S scale). The EW class locomotive was introduced in 1952. these powerful articulated electric locomotives were used in the Wellington region (hence the classification EW"). Comes with three bogies. Design by Peter Bryant (KiwiTrains). produced b

Handrails and roof air vents for FM and AG class guards vans. Includes original-style handrails and the newer style.

NZR 30ft F class guards van. Design is the 1950s steel-clad variant, with fully enclosed ends. Scale is HO (1:87), designed for 12mm gauge track (HOnz). 3D print includes: Guards van shell Chassis Bogies x2 Chains x2 Brake wheel You can also add: Wheelsets (x4) Kadee couple

NZR 56ft AL" class car-van carriage. Includes underframe (not pictured). Design by Simon Lister, produced by 3 Foot 6 Models. Available in NZ120 (1:120) scale. Measurements: NZ120: 145.57mm long x 25.42mm wide x 20.67mm high

NZR ZA class bogie box wagon - NZ120 This model is in 1:120 (NZ120 or TT scale). Includes shell - bogies and couplers not included. Model is also available in 1:87 (HOnz - HO scale with 12mm track) here. Completed model by Darryl Bond pictured. Bogies Type 14 bogies (available via Trackg

ZH class bogie box wagon - NZ120 This model is in 1:120 (NZ120 or TT scale). Includes shell - bogies and couplers not included. Bogies Type 14 bogies (available via Trackgang Products ) Dimensions NZ120: 115.41mm long x 21.40mm wide x 25.35mm high Design by Peter Bryant (KiwiTrains)

NZR ZP class bogie box wagon - NZ120 This model is in 1:120 (NZ120 or TT scale). Includes shell - bogies and couplers not included. Bogies Type 14 bogies (available via Trackgang Products ) Dimensions NZ120: 115.41mm long x 21.40mm wide x 25.35mm high Design by Peter Bryant (KiwiTrai

NZR UBS class bogie tank wagon - NZ120 This model is in 1:120 (NZ120 or TT scale). Includes shell - bogies and couplers not included. The UBS class were used for carrying bulk sulphuric acid and were introduced in 1967. The tanks themselves were owned by Dominion Fertiliser, later BOP Fertiliser.

NZR NC class four-wheel flat wagon - HOnz This model is in 1:87.1 (HOnz scale). Includes: Wagon body Stanchions 4x chains 2x brake pipes 2x coupler covers and screws 2x knuckle couplers 2x 30" wheelsets Dimensions HOnz: 79.2mm long x 28.04mm wide x 17.28mm high Design

The UK class container wagon was first introduced in the late 1960s as the containerisation of shipping was underway. The class grew as NZR added more and more batches of specially built container wagons to its fleet, with numerous wagons built from kit sets produced by Mitsubishi in Japan. At 60ft

The USL class were introduced in 1989 by converting older US class bogie flat wagons to carry logs. The design is HO (1:87 scale). Kit includes: US class chassis (aluminum) Log cradles x4 End stanchions x2 Measurements: HOnz: 187mm long x 29mm wide x 8mm high Design by Lewis Ho

Prototype: The IA class container wagon was introduced by New Zealand Rail from 1990 to 1991. They were an evolution of the HK class container wagons, introduced in 1988, and the earlier UK class container wagons. Slightly longer than a UK class wagon, the IA class are able to carry significantly

Prototype: The IB class container wagons were introduced from 1992 by New Zealand Rail. They were built at the Hillside Workshops in Dunedin. They were an evolution of the IA class container wagons, introduced in 1990. The wagons were a significant increase in size and capacity on previous contai

Prototype: The IA class container wagon was introduced by New Zealand Rail from 1990 to 1991. They were an evolution of the HK class container wagons, introduced in 1988, and the earlier UK class container wagons. Slightly longer than a UK class wagon, the IA class are able to carry significantly

Prototype: The IA class container wagon was introduced by New Zealand Rail from 1990 to 1991. They were an evolution of the HK class container wagons, introduced in 1988, and the earlier UK class container wagons. Slightly longer than a UK class wagon, the IA class are able to carry significantly

The FB class log wagon was introduced in 1992 to carry much longer (12m) logs for export. Originally classified FL, 100 wagons were ordered, but only 75 were manufactured before a design change to allow shorter logs, which resulted in the FC class (which made up the remainder of the order at 25 wago...

NZRs TBC container was first introduced in 1974 and quickly became a well-known symbol of NZR. Pack of 5 containers. Painted and decaled. The model is in HOnz (HO scale - 1:87) scale. Real-life picture by Brad Harvey. Measurements (lwh): HOnz: 69.74mm x 31.4 x 28.8

NZR 30" wheelsets - HOnz Wheelsets represent real-life 762mm (30 inches) wheelsets that NZR uses as standard. Scale is 1:87 (HO) designed for 12mm gauge track. Wheelsets are RP25-88 profile, 18mm pin point to pin point. Sold in packs of 12

NZR type 18 bogie is a modern bogie design used on a number of high-capacity wagons introduced since the 1990s. These bogies are not supplied with wheelsets. Scales S (Sn3.5 - 16.5mm gauge) at 1:64 scale Bogie wagons that use the type 18 bogie: CB-2 class hopper wagon (Type 18A) CF c

NZR type 16B bogie - HOnz D esigned for HOn3.5 / HOnz 12mm gauge (note: not 16.5mm). Accurate NZR 30" (762mm) wheelsets. Available with Type 16A or Type 16B. Design by Frank Collingwood (SARMODEL) produced under license by 3 Foot 6 Models. Scale is 1:87 (HO) designed for 12mm gauge

Set of grills for NZ120 (TT 1:120 scale) models: DA class DB class (coming soon) DBR class (coming soon) DC class Example of these grills - DBR1213 Created by Marks Model Works for 3 Foot 6 Models.

Features: Brand new. Perfect for Railway Building Layout. Compatible with all magnetically operated couplers currently on the market. Simple installation Integrated spring Specifications: Material: plastic. Reference Scale: 1:87, Suitable for HO scale. Color: black Package includes

Specifications: Scale: 1:87 Material:Plastic coupler and metal air hose and Plastic Coupler Box and Lid and metal screws. The Screws are M2.3 6. Package included: 12pcs Couplers and 12pcs Coupler Pocket with Cover and 12pcs Screws.

12mm gauge module for rolling roads. Designed for HOnz modellers. Could be used for TT gauge or HOn3.5 This design is available to download for free from 3 Foot 6 Models Thingiverse account.

New Zealand-made acrylic display case. Perfect for displaying your models. Comes with a wood base and removable case. Measurements: 25cm long, 7cm wide and 7cm high

A1A chassis with 12mm gauge bogies, for HO scale (also known as HOnz, HOn3.5). Pre-orders - expected availability Q1 2026 Chassis comes fully assembled. Features: Accurately sized bogies, A-1-A arrangement (two powered axles, one ideler") Motor with dual flywheel 3D-printed alumin

Tasman Newsprint decals as used on ZL class bogie box wagons (reclassified ZA class wagons). A familiar sight from the 1990s until the early 2000s. Consists of 2x Tasman logos, 2x Newsprint" text

Tranz Rail decal set As seen on locomotives (and some carriages) in New Zealand from 1995 - early 2000s. Available in NZ120 (1:120) HO scale (1:87), OO (1:76) and 1:64 scales.

Stripes for the front cab end of the NZR DF and NZR DG class locomotives.

Ultra-realistic scale leaves for your models, hobby figures, scenes and dioramas. They can be easily fixed in place with small amounts of white glue, diluted white glue or using. 30mls Perfect for an Autumn setting.

6x Corrugated Iron Sheets There are perfect for use when modeling a house which requires a corrugated roof. Could be cut to size required.

A pack of 10pcs model railway lampposts. Each has double head, completed with wires and bulbs. Specifications: Quantity: 10pcs Scale: 1:100 Material: Plastic Colour: Black Voltage: 6V Power: 1W Height: Approx. 6.5cm / 2.8"

Condition: 100% brand new Make your next layout look fantastic with these Apple Fruit Trees. Perfect to enhance the appearance of your model landscape with a touch of greenery Colour: Green with red fruit Material: Plastic Quantity: 5pcs Scale: 1:100 (TT) Approx Height: 2.7inch (6.8cm) Appro

A pack of 10pcs model Outdoor Lamps. Brand new. Perfect for a model railway layout. Complete with wires and LEDs Inside which lights up These lights are suitable for use at supply voltages of 3V. Specifications: Quantity: 10pcs Operating Voltage: 3V. Material: Plastic Emitting color: Warm

Condition: 100% brand new Make your next layout look fantastic with these peach fruit trees. Perfect to enhance the appearance of your model landscape with a touch of greenery Colour: Green with Pink Fruit Material: Plastic Quantity: 5pcs Scale: 1:100 Approx Height: 3.2inch (9cm) Ideal for H

This is a Bag of Brown Grass Static Grass Flock/Powder for Train or Diorama Sets. Landscaping adds color texture and realism to terrain contours. Simply code item in glue and sprinkle with the grass. Great bast for plants and trees to a layout. Produce realistic scenery whether youre a beginner or

This is a Bag of Dark Green Grass Static Grass Flock/Powder for Train or Diorama Sets. Landscaping adds color texture and realism to terrain contours. Simply code item in glue and sprinkle with the grass. Great bast for plants and trees to a layout. Produce realistic scenery whether youre a beginn

This is a Bag of Green Grass Static Grass Flock/Powder for Train or Diorama Sets. Landscaping adds color texture and realism to terrain contours. Simply code item in glue and sprinkle with the grass. Great bast for plants and trees to a layout. Produce realistic scenery whether youre a beginner or

This is a Bag of Green Grass Static Grass Flock/Powder for Train or Diorama Sets. Landscaping adds color texture and realism to terrain contours. Simply code item in glue and sprinkle with the grass. Great bast for plants and trees to a layout. Produce realistic scenery whether youre a beginner or

This is a Bag of Snow Grass Static Grass Flock/Powder for Train or Diorama Sets. Landscaping adds color texture and realism to terrain contours. Simply code item in glue and sprinkle with the grass. Produce realistic scenery whether youre a beginner or advanced modeler. The products are all formul

Single light up clock, complete with wires and bulb. Specifications: Quantity: 1pc Scale: 1:87 Material: Plastic Colour: Black Voltage: 3V Power: 1W Height: Approx. 6.7cm DO NOT use them on more than 3V directly to avoid damaging the LED. You must connect a resistor in series before you wil

A pack of 10pcs model railway lamppost. Each has single head, completed with wires and bulbs. Specifications: Quantity: 10pcs Scale: 1:100 Material: Plastic Color: Black Voltage: 6V Power: 1W Height: Approx. 6cm / 2.5"

High Quality ready painted Cows perfect for any layout. Size: Approx 1.2cm x 0.8cm High Scale: 1:160 (N scale). Material: Plastic. Colour: White and black. Package included: 10 Cow's in random positions.

High Quality ready Model Sheep perfect for any layout. Size: Approx 0.7cm x 0.4cm High Scale: 1:160, Suitable for N Scale. Material: Plastic. Colour: White Package includes: 14 sheep with 5 different poses

A pack of 10pcs model railway streetlights. Each has single head, completed with wires and bulbs. Quantity: 10pcs Scale: 1:160 Color: White Voltage: 6V Power: 1W Height: Approx. 7cm

Green Modeling Flock / Foliage. Perfect for DIY trees and bushes. Ideal for and scale model diorama or board. Works perfect with our tree skeletons to create your own trees. Specifications: Colour: Green Amount: 30g Scale: Any

The Standard railcars were introduced by NZR in 1938. This model is NZ120 (TT scale, 1:120). Design by Peter Bryant. produced by 3 Foot 6 Models under licence. Chassis: NZ120: Graham Farish class 170 Measurements: NZ120: 167.18mm long x 23.81mm wide x 27.7mm high.

The Wairarapa railcars were introduced by NZR in 1938. This model is NZ120 (TT scale, 1:120). Design by Ben Carter, produced by 3 Foot 6 Models under license. Chassis: Measurements: NZ120: 167.18mm long x 23.81mm wide x 27.7mm high.

The Silver Fern railcars were introduced by NZR in 1971, and were utilised on the Auckland-Wellington daytime service until 1991. From 1991 to 2001 they operated the Auckland - Tauranga and Auckland - Rotorua services. Following the cancelation of these services, the Silver Ferns transferred to Au

The Drewry/Fiat/Twinset/88 seater railcars were the most numerous NZR railcars, first introduced in 1955. They lasted (as railcars) until 1978, with a number then rebuilt as carriages, the last of which was withdrawn in 1985. This model is NZ120 (TT scale, 1:120). It includes: Both ends of the

The NZR Midland railcar was a small class of two railcars built in the 1930s, as one of NZRs early forays into railcars as an alternative to the locomotive-hauled passenger trains of the time. This model is NZ120 (TT scale, 1:120). Design by Ben Carter, produced by 3 Foot 6 Models under license

Stadium Light for Modeling. Lights up bright white. Each light has its own wires. Specifications: Quantity: 1pc Scale: 1:87 (HO scale) Material: Plastic/Steel Color: Silver Voltage: 3V Power: 1W Height: Approx. 11cm

NZR DJ class diesel-electric locomotive shell in OO scale (1:76). Note: pictures show NZ120 version, OO version test print is underway. Prototype: The DJ class were introduced by NZR from 1968, as part of its dieselization process to replace steam locomotives in the South Island. Built by Mits

DSG class heavy shunting locomotive from the 1980s. Still a common sight on the New Zealand railway network, the DSG is found all over the country. Shell is available in OO scale (1:76) - similar to Frateschi. Print includes bogie side-frames. Available with and without shunting refuges. Chassi

Two 3D-printed accurate NZR level crossing lights and bell. OO scale (1:76) Lights can easily be modified to add micro-LEDs.

KiwiRail decal pack for locomotives. Each decal pack includes: Long hood KiwiRail text and ferns x2 (fern only for DSC, DSG and DSJ class) Short hood KiwiRail logo x1 (white text for some classes) Locomotive numbers: cabside x2, number boards x4, headstocks x2 (varies depending on livery v

Railways Road Services decal pack for buses - created for the Bedford YRT bus model. Each decal pack includes: NZRRS lazy z" green logo with the text Railways Road Services" in black x4 Available in the following scales: NZ120 (1:120) HOnz (1:87) OO (1:76) S (1:64)

KiwiRail decal pack for AK class carriages. Each decal pack includes: 10x grey KiwiRail side logos (enough for 5 carriages / vans) 10x grey website address (either kiwirail. kiwirailscenic or greatjourneysnz.com ) 10x carriage or numbers (please advise below) 20x

NZR silver stripe decals for: DA class locomotive DB class locomotive RM 88-seater twinset railcar RM Standard railcar RM Vulcan railcar Each decal pack includes stripes for 1x locomotive or railcar. Available in the following scales: NZ120 (1:120) HOnz (1:87) OO (1:7

NZ120 (1:120 TT scale or TT:120 scale) Massey-Ferguson tractor. Print comes in five parts: the tractor body and four wheels. Requires axles and paint to complete. A pretty common sight around New Zealand, this model tractor (97) has been around since the 1960s, so wont be out of place on a layout

Bedford YRT bus in 1:87 scale. A classic NZRRS (New Zealand Railways Road Services) bus. Print comes in six parts: Bus body Bus chassis Wheel hubs x4 Requires tyres and paint to complete. Design by Neil Ward. produced under license by 3 Foot 6 Models. Picture of completed model by M

High quality die-cast model Front Hand Loader, perfect for any model scale layout. Material: Plastic and Alloy

High quality die-cast model farming tractor, perfect for any model scale layout. Material: Plastic and Alloy Size: Like the picture shows

High quality plastic model Farming Plow for Tractor, perfect for any model scale layout. Material : Plastic and Alloy

High quality plastic model Farming Feed Out Trailer for Tractor, perfect for any model scale layout. Material: Plastic and Alloy

High quality die-cast model Dump Truck, perfect for any model scale layout. Material : Plastic and Alloy

High quality die-cast model Steamroller, perfect for any model scale layout. Material: Plastic and Alloy

9x Plastic N Scale Model Cars. Each pack comes with a random selection of colours. Material: Plastic

PFC 20ft powder container, a common site on New Zealand rails from the 1970s to early 2000s. 3D print is available in NZ120 (1:120), HOnz (1:87), OO scale (1:72) and Sn3.5 (1:64) scale. Image is a completed 1:64 model from Scott Shadbolt Measurements: NZ120: 49mm long x 20.8mm wide x 20.9mm hi

20ft side-opening container, introduced by New Zealand Railways in the 1980s. The GSX were a common sight until the mid-2000s, when they were replaced with newer designs. Model is available in NZ120 (1:120), HOnz (1:87) and S (1:64) scale. Design by Lewis Holden. Pictures from Scott Shadbolt s

NZR H class Fell locomotive shell. The H class were famous for their use on the Rimutaka Incline on the Wairarapa line between Wellington and Wairarapa. Essentially a tank locomotive with an additional set of horizontal wheels to grip a centre-rail, these locomotives were in use for the entire li

NZR AB class locomotive (shell) - NZ120 The NZR AB class steam locomotive was the most numerous and arguably most famous New Zealand steam locomotive. First introduced in 1915, 141 were introduced in total, and a tank engine version, the WAB was also created. 3D print includes: Engine shell

NZR KA class locomotive (shell) - NZ120 The NZR KA class steam locomotives were introduced in 1939, and were an improvement on the earlier K class locomotives. Model depicts the locomotive in its original streamlined state. This streamlining was eventually removed. 3D print includes: Engine

NZR JA class locomotive (shell) - NZ120 The NZR JA class steam locomotives were introduced in 1946, and were an improvement on the earlier J class locomotives. 3D print includes: Engine shell Tender Tender bogies Scale is NZ120 (TT scale, 1:120). Design by Peter Bryant (Kiwi Trains

NZR K class locomotive (shell) - NZ120 The NZR K class steam locomotives were introduced in 1932. 3D print includes: Engine shell Tender Tender bogies x2 Scale is NZ120 (TT scale, 1:120). Design by Peter Bryant (Kiwi Trains). produced by 3 Foot 6 Models under license. Measuremen

NZR J class locomotive (shell) - NZ120 The NZR J class steam locomotives were introduced in 1939. 3D print includes: Engine shell Tender Tender bogies Scale is NZ120 (TT scale, 1:120). Model depicts the locomotives as introduced, fully streamlined. Design by Peter Bryant (Kiwi Trai

NZR J class locomotive partially streamlined (shell) - NZ120 The NZR J class steam locomotives were introduced in 1939. This model depicts the locomotives as they looked in the late 1940s, when their streamlining was removed. 3D print includes: Engine shell Tender Tender bogies Scale

NZR WB class tank locomotive (shell) - NZ120 Scale is NZ120 (TT scale, 1:120). Model depicts the locomotives at the end of their working lives. Design by Peter Bryant (Kiwi Trains). produced by 3 Foot 6 Models under license. Painted example by Lawson Currie of Railscale33D Chassis: Grah

NZR WAB class tank locomotive (shell) - NZ120 This model depicts the WAB, the tank version of the NZR AB class locomotive. Includes the rear bogie, so you can use a 4-6-2 or 4-6-4 chassis (see Peter Bryants website for more details). Scale is NZ120 (TT scale, 1:120). Design by Peter Bryant (K

NZR BA class locomotive (shell) - NZ120 This model depicts the locomotive with handrails added (see Peter Bryants website for more details). Also included are tender bogies. Scale is NZ120 (TT scale, 1:120). Design by Peter Bryant (Kiwi Trains). produced by 3 Foot 6 Models under license. Cha

The NZR DG class locomotive was introduced in 1955. Built by English Electric, they were originally allocated to both islands. The fleet was eventually entirely based in the South Island from 1976. Some locomotives were rebuilt in the late 1970s with new cabs and engine upgrades, but withdrawals b

DSB class shunting locomotive was first introduced in the 1950s as part of NZRs diselisation program. This particular model is the Mitsubishi Heavy Industries version from the 1960s. These rigid-framed shunting locomotives were seen all over New Zealand, although the Mitsubishi DSBs were mainly f

Set of grills for HOnz (HO scale 1:87 scale) models: DA class DB class (coming soon) DBR class DC class Example of these grills on a Neil Ward model works DC. Created by Marks Model Works for 3 Foot 6 Models.

DH class heavy shunting locomotive from the late 1970s. Manufactured by General Electric, the DH class is GEs U10B model. Model is as the NZR DH class appeared in the 1980s - no shunters refuges. Includes bogie side-frames. Model scale is HO (1:87) for HOnz (12mm gauge track). Chassis: No

DSB class shunting locomotive was first introduced in the 1950s as part of NZRs dieselisation program. This particular model is the Mitsubishi Heavy Industries version from the 1960s. These rigid-framed shunting locomotives were seen all over New Zealand, although the three Mitsubishi DSBs were m

The NZR DG class locomotive was introduced in 1955. Built by English Electric, they were originally allocated to both islands. The fleet was eventually entirely based in the South Island from 1976. Some locomotives were rebuilt in the late 1970s with new cabs and engine upgrades, but withdrawals b

The NZR TR class locomotives are a group of small shunting tractors (hence the classification TR") that were once a common sight across the New Zealand rail network. This model represents the TR class's final iteration, built at NZRs Hillside workshops in Dunedin between 1973 and 1978. A handful o

In the late 1970s, NZR began rebuilding its elderly DG class, adding a new cab as part of the process. Between 1978 and 1980, ten DGs were so rebuilt. However, within three years all the DG class were withdrawn from service by NZR. 3D print is of the cab only, fits 1:64 scale locomotives. Scale

Canadian National GMD G8 shell in HO scale. This design is based on our GMD (General Motors Diesel) G8 design used by Canadian National in Newfoundland. Note: all prices are in NZD Designed to fit Kadee couplers. Each 3D print comes with: underframe and loco shell bogie side frames x2 (D

Set of grills for OO (1:76 scale) models: DA class DB class (coming soon) DBR class (coming soon) DC class Example of these grills - DBR1213 Produced by Marks Model Works for 3 Foot 6 Models.

Set of grills for HOnz (1:87 scale) models: DFT class Created by Marks Model Works for 3 Foot 6 Models.

Set of grills for HOnz (1:87 scale) models: DG class Created by Marks Model Works for 3 Foot 6 Models.

NZR DA class locomotive shell - 3D printed body. Chassis not included. Choice of Phase I and Phase III locomotives. Prototype: The DA class (EMD G12) were the most numerous diesel electric locomotives ever to run in New Zealand. First introduced in 1955, the 146 strong class eventually replaced

The NZR DG class locomotive was introduced in 1955. Built by English Electric, they were originally allocated to both the North and South Islands. The fleet was eventually entirely based in the South Island from 1976. Some locomotives were rebuilt in the late 1970s with new cabs and engine upgrade

NZR DA class locomotive painted shell - available with classic NZR silver stripe" livery. Chassis not included. Prototype: The DA class (EMD G12) were the most numerous diesel electric locomotives ever to run in New Zealand. First introduced in 1955, the 146 strong class eventually replaced st

3D printed scale model of the Mangaroa Church. Dimensions: N (1:160 scale): 56 x 81 x 58mm Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

1:160 3D printed scale model of a single-stall engine shed, based on the Reefton example. Professionally painted by Jack Tueton Dimensions: N (1:160 scale): 8.7cm 5.7cm 5.5cm Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

1:87 (HO scale) 3D printed scale model of a Upper Hutts Golders Cottage. Golders Cottage is today a museum. Professionally painted by Jack Tueton. Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

1:87 3D printed scale model of a small cottage called Freds House." Professionally painted by Jack Tueton Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

1:87 (HO scale) 3D printed scale model of a small cottage called Martys House." Professionally painted by Jack Tueton Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

N scale (1:160) 3D printed scale model of the Paekkriki (South End) signal box. Today, the South End signal box is a heritage-listed building. Professionally painted by Jack Tueton. Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

ARA Bendy Bus - ready to roll in HO scale (1:87). Ready to Roll (i.e. painted, decaled, reassembled). This is a Siku model re-painted in classic ARA colours.

1:120 scale model of DJ3303 in ORB livery. DJ3303 was sold by NZR to the ORB in 1988 but withdrawn once NZR took over the line in 1992.

DA class locomotive (phase III) in NZ120 In the classic silver stripe livery. Needs couplers, grills and handrails to complete details. Mechanism is a Lifelife SD9.

NZR 56ft A" class passenger carriage, South Island Day car configuration. Includes underframe. Design by Simon Lister, produced by 3 Foot 6 Models. Available in NZ120 (1:120) scale. Measurements: NZ120: 142.27mm long x 22.68mm wide x 20.67mm

NZR 56ft AO" class passenger carriage, big window" carriage from the 1980s. Includes underframe. Design by Simon Lister, produced by 3 Foot 6 Models. Available in NZ120 (1:120) scale. Measurements: NZ120: 142.27mm long x 22.68mm wide x 20.67mm

The FS class steam heating vans, also nicknamed the Hot water bottle" carriages were special vans introduced in the 1960s to provide heating for carriage trains following the withdrawal of steam locomotives by NZR. They were a common sight on passenger trains in the North and South Islands until fl

NZR 47ft carriage Scale is NZ120 (1:120 or TT scale, also known as TT:120), designed to run on N scale track. Chassis: Model comes with a chassis but no bogies. Measurements: NZ120: 162mm long x 22.65mm wide x 25.10mm high Design by Peter Bryant (Kiwi Trains) produced by 3 Foot 6 Models

NZR 47ft carriage/van 3D printed model. Scale is NZ120 (1:120 or TT scale, also known as TT:120), designed to run on N scale track. Does not come with bogies. Real-life picture is of Af 804 Tainui" at Glenbrook Vintage Railway in Auckland by Rick Schreuder. Measurements: NZ120: 162mm long x

KiwiRails AKC class carriages are the cafe version of the AK class of carriages that were introduced from 2011. This 3D print represents the AKC class as introduced. It consists of four parts: Carriage shell Underframe and seating arrangement 2x bogie sets The AKC carriages always ru

KiwiRails AK class of carriages were introduced from 2011, and greatly improved passenger comfort on the remaining intercity passenger rail services in New Zealand: the Tranz Alpine (Christchurch - Greymouth), Coastal Pacific (Christchurch - Picton) and Northern Explorer (Auckland - Wellington).

Auckland Transport SA class carriage in NZ120. The SA class carriages were rebuilds of British Rail MkII carriages from 2003 for use on Aucklands metro rail network. They were operated in push-pull mode with SD class driving carriages at one end, and a diesel locomotive (either a DC or DFT class l

KiwiRail AKS class carriage in NZ120. The AKS class carriages were rebuilds of British Rail MkII carriages, originally rebuilt as the SA class carriages for use on Aucklands metro rail network. The AKS were introduced to be used as additional luggage-carrying carriages, replacing older 1970s vans.

KiwiRail AKF class carriage in NZ120. The AKF class carriages were rebuilds of British Rail MkII carriages, originally rebuilt as the SA class carriages for use on Aucklands metro rail network. The AKF carriages are now used as kitchen cars on KiwiRails long-distance passenger trains. This 3D pr

NZR 56ft A" class passenger carriage, North Island day car second class configuration. Includes underframe. Design by Simon Lister, produced by 3 Foot 6 Models. Available in NZ120 (1:120) scale. Measurements: NZ120: 142.27mm long x 22.68mm wide x 20.67mm

NZR 56ft carriage, painted red with white roof, with black underframe. NZ120 scale. Add your own couplers and bogies.

NZR 50ft carriages were built to several designs, this one is the 1930 North Island variant that was fully steel clad. Measurements: NZ120: 126mm long x 20.1mm wide x 22.69mm high Design by Neil Ward produced by 3 Foot 6 Models under license.

1:120 3D printed scale model of a New Zealand courthouse. This model is based on the plans for the original Dannevirke Court House building. This building is now the Dannevirke Galley of History. The building was completed in 1906 and was built in the Edwardian Baroque" style popular at the tim

The Guest Gantry was once a common sight in small to medium sized railway yards up and down New Zealand. Introduced as part of a modernization program in the 1970s, the gantries were created to handle then-new ISO shipping containers. Designed by NZR engineer Bill Guest, many examples of the Guest G...

NZR steel bridge span, 30ft long Model is in NZ120 (TT - 1:120) and HOnz (1:87 - HO scale). Measurements: NZ120: 76mm long x 13mm wide x 9mm high HOnz: 104.8mm long x 17.9mm wide x 12.4mm high

3D printed concrete road bridge sides, based on Public Works Department design. Available in HO scale (1:87) and NZ120 scale (1:120). Kit consists of: four curved sides at the start of the bridge, two straight sides to make up the rest of the bridge. Measurements: HO scale: 11mm long

1:120 3D printed scale model of a small cottage called Freds House." Dimensions: (1:120 scale): 56mm wide, 81.7mm long and 43mm tall Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

1:120 3D printed scale model of Upper Hutts Golders Cottage. Golders Cottage is today a museum. Dimensions: (1:120 scale): 65mm wide, 71.93mm long and 36mm tall Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

NZ120 3D printed scale model of the Paekkriki (South End) signal box. Today, the South End signal box is a heritage-listed building. Dimensions: (1:120 scale): 82mm wide, 34mm long and 63mm tall Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

1:120 3D printed scale model of a small cottage called Martys House." Dimensions: (1:120 scale): 67.6mm wide x 100.99mm long x 43mm high Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

3D printed scale model of a classic shearing shed. Dimensions: N (1:160 scale): 100.5 x 84.5 x 34.9mm NZ120 (1:120 scale): 134 112.6 46.5mm HO (1:87 scale): 184.8 155.4 64.2mm Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

3D printed scale model of the Mangaroa Church. Dimensions: N (1:160 scale): 56 x 81 x 58mm NZ120 (1:120 scale): 74.66 107 77.3mm HO (1:87 scale): 102.97 148.9 106.6mm Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

3D printed scale model of the BNZ bank building in Dannevirke. 3D print comes in two parts - building and roof. Dimensions: NZ120 (1:120 scale): 138.66 99.5 67.83mm HO (1:87 scale): 190 136.9 91mm

1:120 (NZ120 scale) 3D printed scale model of a NZR railways cottage called Martys House." Professionally painted by Jack Tueton Design is licensed to 3 Foot 6 Models by Fern Valley N Scale Model Railway

- blog - Shop - Category: Showing the single result

Original price was: $. $5.00 Current price is: $5.00. Category: Woocommerce Plugins Going to the Post Office in Australia can be a pain. Its also unreliable compared to some other carriers. This code will stop shoppers from adding a PO Box or Parcel Locker to the Billing and Delivery address field...

- blog - Shop Showing the single result

a few product design projects over the years - Filter by - All 09 - Development 03 - UI Design 06 - UX Design 06 - Visual Design 01 - Web App Build 01 Storm Education Development UX Design Show project The Challenge: To redesign an education platform, helping aspiring international students make the...

A done-for-you mini funnel built around one buyer persona and one clear offer, so your ads and landing page finally say the same thing and sales stop feeling random. What you get - A shortlist of 5 buyer personas for your store, plus one fully expanded primary persona, with pains, objections, trigge...

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

Original price was: $ .$20.00Current price is: $20.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; 2026 calendar printed on card and wire-bound, with a selection of photos showcasing Taranaki landmarks and locations. A4 sized when folded and A3...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Additional information SKU ACR0041 Categories Taranaki Photo Blocks, Taranaki Tabletop Art Tag Clearance Taranaki Media is a...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Presented on a 6mm-thick acrylic print, with metal easel stand included. Only 1 left in stock

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 2 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Additional infor...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 2 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 3 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 2 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 1 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 2 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 2 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 2 left in s...

.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed directly onto an aluminium sheet (with slightly rounded corners) for a vibrant, high quality finish. The perfect tabletop size at 18x13cm, with a metal easel stand included. Only 1 left in s...

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.

.00 $500.00Price range .00 through $500.00.woocommerce-notices-wrapper,.woocommerce-message,.woocommerce-error,.woocommerce-info display: none; Printed on 260gsm canvas, gallery-wrapped with a 30mm-deep frame and ready-to-hang.