Shop for all in Boat, inflatable

Tail Light Kit - includes 7 pin plug and holder, Premium LED lamps designed to be an easy to fit trailer lighting solution that can be fitted in a range of orientations. whilst boat trailers need a number plate lamp that shines out of the wide side of the lamp downwards. 8m cable length, are submers...

M 7x50x3m Washer - fit up to 6mm shaftGalvanised - sold as per 1 washer

No physical stock - shipped directly from supplier. ETA 5-7days Spring Kits include 1x pair springs, hangers, bolts, slippers, axle plates, 4x U-Bolts615mm x 50mm and are dacromet coated16mm eye bushEye centre bolt - 270mm

Boat trailer quad assembley (One Set = Left and Right Quad) Includes:4 x 590mm wobble roller arms (with rollers), 5mm plate, 25mm gullwing shaft, M16 bolt hole2 x 400mm rocking arm carrier (50mm wide, 16mm bolt hole, M16 thread for wobble arms)2 x M16 Bolt6 x M16 Nuts Washers No mounting bracket inc...

CLEARANCE Last stock - NEW but shorwoom weathered DeeMaxx 1 piece 12" Hub/Rotor 6 x 5.5"pcd, 1/2" StudOne piece hub / rotor will fit most 13" Galv spoke rims in the 1500kg and 1750kg disc brake range.All rotors are ventilated which will run cooler and improve braking performance.Wheel studs not incl...

M10 nyloc nut in A2-70 stainless Sold in pack of 10

Galvanised car transporter lock in deck wheel chock Sold as per one chock (each)

Galvanised plate and Ubolts to hold wobble roller uprights.Fits 50x50 box section. Comes with washer and Nyloc nuts

Will fit Xpress Trialer, Aakron Xpress (per 2019) and CM trailer - US and imorted trailer hubs US 3500lb bearings44649/10 and 68149/11comes with Marine washer, seal and cup plus splitpin requirements for 1 wheel bearing replacement

M12 Nyloc Nut in A2-70 stainless Sold in lots of 10.

This is a compact, low profile LED marker with a highly contoured design for seamless integration with modern vehicle styles. Designed for reliability and performance. Featuring a small footprint can be fitted easily where space is limited. With slimline smart clip mounting the clip base is invisibl...

Highfield expanding bung and housing - lever style (complete set) Housing diameter = 32mm, 40mm thread to fit 34mm transom width.

Premium hydraulic backframe assembly 3/4" master cylinder and folding handle The combination of these Premium developed products deliver what every braked trailer user has been asking for. Lower height, a lever made from high strength steel, simple and intuitive to use. Backframe assembly Including...

Drain with pull up slider and valve. 40mm dia. hole required with a max transom thickness of mm. Fits many dingy transom - Ideal for Aakron roll-up boats.

Comlete 165R13C 10 off-set wheel13x5" Galvanised Spoke 5x4.5" PCD 10ET Rim 8ply Tyre Bore Diameter - 84mmPCD 5x4.5 inchLoad rating 670kgOuter diameter 596mm Price above incl the govenment tyre wise fee of $6.65 GST

Velcro straps for internal/external oar storage allowing boat owners to store oars and paddles inside of the boat along the inner outer side of the tubes. These patches feature a velcro webbing sewn into PVC fabric. thats threaded thru the patch. The patches must be installed with a good quality glu...

"This product is shipped directly from our supplier" The Tow X - 8" jockey wheel. super affordable for those big requirement This Jockey has a 4 bolt swivel mount bracket, 8" rubber tyre and metal inner wheel with a huge rating of 450kg. Can be fitted to your trailer draw bar with U-bolts (sold sepr...

We can offer a comprehensive range of tow ball sizes, ratings including duo-ball1 7/8", 50mm, 3/4 or 1" shaft. If its not list please feel free to the above towball have a shank lenght of 60mm If its not list please feel free to

Design for marine application on boat trailers. The bearing buddy will minimize water ingress in your hub. Grease nipple allows for fast grease refill. Sold a a pair These are a popular choice for boating enthusiasts and trailer owners who do high mileage. They help keep bearings fresh and rejuvenat...

FULLY SUBMERSIBLE LED Lights Comprises of 1 x LH light and 1 x RH light, both come with 8m of 4 core cable. Size - 100 x 95mm and is made from strong impact resistant polycarbonate lens, has a builtin retro-reflector. The RH light has number plate lamp. 10-30 volt capable E-mark (E4) certifiedComes...

U-bolt on 7" Alloy wheeled jockey from Trailparts If you sick an tired of that flat pneumatic wheel then this is the best option, it has a 190mm x 75mm rubber tyre on hi-impact thermo-plastic Rim250kg load capacity275mm height adjustment300mm from ground to centre of swivel bracket610mm overall clos...

Cast in steel for high strength, these couplings are simple to operate.Complies with standard 5232-1993.Electroplated finish.Specifications 4 bolt pattern, 90 x 36mm rectangular centre to centre to suit 10mm bolts. Fitment should be by way of 4x high tensile bolts.

Current model Trojan caliper set Caliper sets, include 1 pair of calipers, pads mounting hardware. Brake pads are asbestos free. These are cast in SG iron for protection against corrosion in normal use (refer exception below). These calipers are fitted with a Phenolic Piston, which is a high strengt...

3:1/1:1 winch, comes with hi-strength braided winch rope The Trojan range of winches is the widest available in the market with multiple options, available in winding options up to 15 to 1 ratio for the bigger boats. These predominantly marine winches are galvanized and the components are high quali...

NOTE : this will be shipped directly from the supplier, ETA 5-7 days Half Beam Duratorques - Fabricated, Rated 750kg each side - Sold as a pairThose shown as RETRO fit are a direct replacement for very early versions. Early model hubs will not fit on retro Duratorques.The capacity of 1500kg per pair...

This is a Replacement stainless Kodiak trailer 10 inch disc brake rotor 5 5tud x 4.5" PCD This brake rotor is designed to slip over 5 Lug idler hubs with a 5 on 4 1/2 inch bolt pattern that have 1/2 inch studs. This slip on rotor goes over top of hub, then your tire wheel and lug nuts. The Kodiak is...

Design for marine application on boat trailers. The bearing buddy will minimize water ingress in your hub. Grease nipple allows for fast grease refill. 1 pair - cap colour maybe different from shown

Standard height quad bracket to fit 50mm wide rocker arm25mm high, M16 bolt hole Hot dipped galvanised steel partsTo fit 50mm wide box sectionBracket only, Bolt and U-bolts not included

Replaces a standard coupling pin and is secured with a heavy duty brass lock.Marine grade 316 stainless steel pin and bushSupplied with 2 keysTrailer coupling not includedAnti-corrosion solid brass body

Wheel bearings are a component of your boat trailer that require constant maintenance and attention, and there is nothing worse than having a great day on the water ruined by a wheel bearing failure.Bearing Buddies are a great way to help extend the life of your wheel bearings. They work by allowing...

Size - 100 x 95mmStrong impact resistant polycarbonate lensInbuilt retro-reflectorInbuilt number plate lamp (RIGHT HAND LIGHT ONLY)10-30volt capableE-mark (E4) certified8m of 4-core cable includedadustable hole mounting bracket and screws included

Inflatable boat valve fitting Seal to top of fitting 20mmFitting dia 19mm, Internal dia. mmHose end 17mm dia.

Trailer coupling lock, Suits cast lever couplings. Easy to fit and suits Trailparts, Trojan, and Viking lever coupling made from hardened steel pin with chrome plated finish Rubber dust over seals key entry areaPin size: 3/8" x 69mmL

Complete galvanised wobble roller arm 25mm gullwing arm with blue rollers fitted, heavy duty mounting toungeNeed M16 ny-loc nut and wash to attach to wobble rocker arm (sold separately) Large roller - 590mm wideMedium roller - 440mmSmall roller - 350mm Outside to outside of wobble roller

Galvanised 40x40mm wobble roller rocker arm. 40x40 box section but has 50mm mount point with M16mm hole.400mm - hole off-set, 180mm/220mm500mm - hole centred 250mm 2 lengths - 400mm or 500mm Mounting bolt not included.

This complete boat repair kit for PVC inflatable includes:- 1 x plastic valve tool (8 teeth)- 1 x tube chemical glue- 1 x paint brush - 2 x oar lock pin nuts- 2 x diaphragm for Highfield drain bung- 2 x PVC strips (light grey) 22cm x 12 cm

Bearing seal components for Xpress, Aakron Xpress, USA 3500lb trailers, 2 lip Marine sealSeal flat washerSeal cup Sold individually or as a kit containing the 3 parts

Complete centre mounted quad roller set (left and right), that's 8 wobble rollersEach set included4 wobble arms with rollers M16 nyloc nuts2 rocker arm carriers (400mm) with 2 x M16 bolts Nuts2 standard riser post with ubolts/plate to fit. 1 x set = 1 Left quad and 1 right quad

1 7/8" override braked coupling (2000kg)Hot dipped galvanised Standard 4 hole pattern - 185mm centre to centre long x 55mm centre to centre wideLocking feature on handle plunger

Galvanised with 2 hole mounting options4 u-bolts sizes to fit 100mm and 70mmComes with ubolts, choose from the drop down menu3 stud to suit multiply PCD

Get yourself a set of boat trailer guide poles right here in NZ.One of the biggest hassles for any boatie is getting the boat on your trailer when everyone is watching. Have the confidence with boat guide poles attached on your trailer bumper. launching and retrieving the boat will become a breeze...

Galvanised springs - 560mm x 50mm - price is per spring16mm bush (14mm on request) Eye / Slipper

M12 Galv U-bolt - various sizes avaliable - see drop down menuComes with nyloc nut and washers. Internal measurement in mm Sold as per item

Be the first to leave a review. Model# 1994 Provides 2,300 ft-lb maximum torque and 2,500 ft-lb of loosening torque and low maintenance pin-less hammer provides ultimate reliability and added hitting power. Fact Sheet REQUEST INFO PARTS MANUAL - Provides 2,300 ft-lb maximum torque and 2,500 ft-lb of...

Be the first to leave a review. Model# 295-XL Featuring one-hand operation and control R unique one click" fwd/rev hard hitting protected design" hammer cage front flange reduces vibration to 4.45 m/sec2, with 900 ft-lb maximum torque and. 50 ft-lb loosening torque. Fact Sheet REQUEST INFO PARTS...

Be the first to leave a review. Model# 6275-A .0 HP 4 INSIDE CUT-OFF TOOL WITH SPINDLE LOCK Fact Sheet REQUEST INFO PARTS MANUAL - 4,000 RPM - .0 HP motor eliminates stall and increases reliability - Extended length for better reach. Get in where other tools fail to go - Compact tapered gear housing...

Be the first to leave a review. Model# 6560 HP 4 COMPOSITE CUT-OFF TOOL Fact Sheet REQUEST INFO PARTS MANUAL - 4,000 RPM - HP non stall motor - Patented Silencing technology" reduces noise to 89 dBA) - Composite grip and throttle trigger for comfort - Cuts 3/8" Rolled Steel/ 8 Gauge - Features 4" di...

Be the first to leave a review. Model# 525-A Side mounted wheel and in-line motor allows for straight cutting of materials. Manufactured from high grade material precision parts designed for industrial and heavy duty automotive use. Fact Sheet REQUEST INFO PARTS MANUAL - 18,000 RPM Free speed -. HP...

Be the first to leave a review. Model# 6 30 HP 3 FLEX HEAD CUT-OFF TOOL Fact Sheet REQUEST INFO PARTS MANUAL - 18,000 RPM Free Speed -. HP Motor - 3 Position Flex Head - Cuts 3/8" rolled steel or 18 gauge steel sheet - 360 Rotational guard and exhaust - Patented muffler design reduces noise level to...

Be the first to leave a review. Model# 6 20 HP 3 Reversible cut-off tool cuts 3/8" rolled steel or 18 gauge steel sheet. Fact Sheet REQUEST INFO PARTS MANUAL - 18,000 RPM Free speed -. HP Motor - Wheel directional change on top of grip allows operator to change the direction of sparks - Speed contro...

Be the first to leave a review. Model# 6 0 HP 3 COMPOSITE CUT-OFF TOOL Fact Sheet REQUEST INFO PARTS MANUAL - 20,000 RPM Free speed -. HP Motor - Patented quiet tuned exhaust (86 dBA) - Feather trigger for better speed control - Ergonomically designed housing - Compact and low weight - Most comforta...

Model# 4338 The 4338.6 HP 3/8 Composite Reversible Drill features a patented ergonomically designed handle and feather trigger for better speed control. Fact Sheet REQUEST INFO PARTS MANUAL - 1,800 RPM - .6 HP Motor - Fitted with Jacobs keyless chuck - Feather trigger for better speed control - Trig...

Be the first to leave a review. Model# 6700-6GCV Patented double sealed, lubrication free motor prevents dust contamination of the air motor and eliminates the need for oiling. Fact Sheet REQUEST INFO PARTS MANUAL - Lubrication free air motor - Patented double sealed motor prevents dust contaminatio...

Be the first to leave a review. Model# 6700-6G Patented anti vibration motor reduces vibration levels Fact Sheet REQUEST INFO PARTS MANUAL - Lubrication free air motor - Patented double sealed motor prevents dust contamination - Low vibration level m/sec2 - Advanced silencing technology reduces nois...

Be the first to leave a review. Model# 6700-DCE-6V The DC current renders the tool shock hazard free and totally safe to use, the 20 low voltage DC cable allows use around vehicles and in industrial fabrication and assembly areas Fact Sheet REQUEST INFO PARTS MANUAL - Three push button speed setting...

Be the first to leave a review. Model# 6700-DCE-6 The DC current renders the tool shock hazard free and totally safe to use, the 20 low voltage DC cable allows use around vehicles and in industrial fabrication and assembly areas Fact Sheet REQUEST INFO PARTS MANUAL - Three push button speed settings...

Model# 1777K /4̸ Impact Wrench Kit which includes the AIRCAT 1777, Tool Bag and Grey Pneumatic /4-in. Drive Deep Length" Impact Socket Set Fact Sheet REQUEST INFO PARTS MANUAL - Includes: 1777 /4̸ Impact Wrench, AIRCAT Tool Bag and Grey Pneumatic /4-in. Drive Deep Length" Impact Socket Set -...

Be the first to leave a review. Model# 6245 The NEW 6245.5 HP Angle Die Grinders compact design allows for maneuverability in tight spaces. Fact Sheet REQUEST INFO PARTS MANUAL 20,000 RPM .5 HP Motor Low weight composite housing High quality 3-piece precision collet Safety lock-off trigger for added...

Be the first to leave a review. Model# 6 1 22,000 RPM Free speed,. HP 3 cut-off tool. Fact Sheet REQUEST INFO PARTS MANUAL - 22,000 RPM Free speed -. HP Motor - Built-in silencing reduces noise level - Safety lock-off trigger for added safety - Low weight composite design with aluminum guard Specifi...