Shop for all in Motor vehicle parts

Karmann Ghia 1955-1958 Our reference BBT-0616-494 B10J

Karmann Ghia 1960-1971 Our reference BBT-0085-190 63B132

Karmann Ghia 1960-1974 Our reference 141823715, BBT-0753-200 K61

Karmann Ghia 1958-1963 Our reference BBT-0759-421 9Bi

Karmann Ghia 1959-1967 Our reference 141955215C, BBT-2470-520 A19B

Karmann Ghia 1971-1974 Our reference BBT-2699-055 R47H

T2 Split Bus - middle seat 1950-1966 Our reference BBT-8072-110 K94

Brake bleeding aid Our reference BBT-8600 EW

Karmann Ghia 1960 to 1971 Our reference BBT-0085-100 63B132

T25 1979-1992 Our Reference RBS503, BBT-1238-300 R35

T2 Bay 1972-1979 FREIGHT: NZ: Via Post Haste or Mainstream at owners risk. WORLDWIDE: Packing and shipping cost on application. Our Reference 211805331F, BBT-0891-976 R49

Type 3 1962-1973 Our reference 3/8 TO 3/8 - AC1159211, 00-9211-0 3/8 TO 1/2 - AC1159212, 00-9212-7 EW/G39

Sand seal pulley kit - same size as stock pulleys. Machine-in version. Has a stainless steel collar installed on the pulleys seal area. 5 hole style with black degree numbers and marks. Seals, collars and spacers are included. Use with P/N 9928 belt. Our Reference 00-8696-0 EW

VW Type 3 1.5-1.6 04/61-08/70 Our reference 77-3104-0 G5

Seal between filter bowl and tap Our Reference: BBT-0492-117 Located: E16

VW Type 3 1.5-1.6 04/61-08/70 Our reference 77-3105-0 G5

T25 1979-1985 Our reference 251611775A, BBT-1267-100

Deflating/inflating tyres individually can be a pain; bending over or squatting beside each wheel while you wait for the air to flow in/out of the tyre, constantly stopping to check the pressure. Groan no more MAXTRAX INDEFLATE makes it quick and easy. The MAXTRAX INDEFLATE is designed (and built in

EMPI cast Alloy oil pump cover is tapped for a full flow oil system fits all VW pumps with 8mm bolt holes. Fitting and gasket included Oil Pump Cover alloy With Full Flow Outlet Hole For VW Our Reference: 300-9226-0 Located: Row I3

Bugpack 3/8-inch push rods stock length - these Pushrods are Designed to Withstand the Demands of Dual Valve Spring Loads and High RPMs. Made from 4130 Chromoly tubing with 60 Rockwell Hardened Tips. .080" Wall: 11.600 OAL.. Our References: B4-0531-9 LOCATION: EW

10 Pack of Metric Washers ARP Stainless M10 x 19.2mm (.755) x 2.3mm (.090) (ID x OD x Thickness) Chamfer: Yes

T2 Split Bus 1955-1967 Our reference 211905811C, 98-2051-B. BBT-0653 D32/3

Indicator relay - heavy duty flasher unit, 6 volt, 3 terminals. Our Reference: BBT-0660-9 Located: D31/3

Ignitor electronic ignition convertor kit for distributors with vacuum advance Dependable, self-contained and maintenance free, the Ignitor delivers twice the voltage to the spark plugs and features an Adaptive Dwell that maintains peak energy throughout the entire RPM range, reducing misfires while

Main Bearings -MAHLE 1200-1600cc Crank: 010.25 Case: 020 (0.50) Thrust: std Our Reference: 111198473 Located: Row 15-10

In a drift application when high steering angles are required, the steering link and knuckle position can align, making steering very difficult. This is known as steering bind or over centering and the best solution is to move forward the inboard mount on the steering rack. This can be achieved with

Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna driving light mounts Bull Bar info: Designed tested in Australia, Rockarmors Premium steel Bullbar provides your vehicle with the u

Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna driving light mounts Bull Bar info: Designed tested in Australia, Rockarmors Elite steel Bullbar provides your vehicle with the ult

Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna driving light mounts Bull Bar info: Designed tested in Australia, Rockarmors Elite steel Bullbar provides your vehicle with the ult

Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna driving light mounts Bull Bar info: Designed tested in Australia, Rockarmors Premium steel Bullbar provides your vehicle with the u

Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna driving light mounts Bull Bar info: Designed tested in Australia, Rockarmors Premium steel Bullbar provides your vehicle with the u

ROCKARMOR ELITE STEEL BULLBAR TO SUIT TOYOTA LANDCRUISER 200 GX GXL Sep 2015-2021 (Full Bar Replacement) - PLEASE NOTE SENSOR HOLES WILL NEED TO BE MANUALLY DRILLED - ALL MODELS FROM September 2015 Through to October 2021 FITTING VIDEO BELOW Features: - 63mm tube 3mm Steel - Compatible with Headligh

NOTE: 2015 - 2017: Full Bumper Replacement (No Grille Cut Required) and on the 2018 - 2020: Full Bumper Replacement (Grille Cut Required if fitting a winch) Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate

ROCKARMOR ELITE STEEL BULLBAR TO SUIT NISSAN NAVARA NP300 D23 2015 - November 2020 (Full Bar Replacement) FITTING VIDEO BELOW Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna drivi

IF HAVE FACTORY WIDE FLARES NEED TO ORDER WIDEBODY HILUX BULLBAR Features Specifications: - Built in 3.2Tonne Rated Recovery Points (Each recovery point) Soft Shackle Compatible) - 51mm Top cross tube for maximum frontal protection - Durable 2.8mm High Quality steel construction for maximum protecti

ROCKAMOR GT STEEL HOOPLESS BULLBAR - NISSAN NAVARA NP300 2020 FITTING VIDEO BELOW Features Specifications: - Built in 3.2Tonne Rated Recovery Points (Each recovery point) Soft Shackle Compatible) - 51mm Top cross tube for maximum frontal protection - Durable 2.8mm High Quality steel construction for

ROCKARMOR GT STEEL HOOPLESS BULLBAR - TOYOTA LANDCRUISER 76,78,79 2007-2023 Please note from MY2017 this Bullbar will not suit Single Cab 79 Series models. Product features: - Proudly made in Australia - Suits all Landcruiser 76, 78 and 79 Series from 2007 on with flares - Full steel construction, m

Product: 12,000lbs 4x4 Winch Suits Vehicles: All winch compatible bullbars Winch Specifications: - Manufacturer: Rockarmor 4x4 - Line Pull: 5,443kgs / 12,000lbs - Motor: Series Wound DC12V / 7.2HP - Gear Train: 3 Stage Planetary - Gear Ratio: 216:1 - Free Spooling Clutch with Rotating Gear Ring - IP

ROCKARMOR ELITE STEEL BULLBAR TO SUIT HOLDEN COLORADO (Bumper Cut) FITTING VIDEO BELOW Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna driving light mounts Bull Bar info: Designed

FITTING VIDEO AND MANUAL AT THE BOTTOM OF PAGE WHATS INCLUDED IN THE PACK: - 1 x Rear bar - 2 x Wheel carrier arms (Can also be used to carry jerry can holder) - 1 x Rear number plate light - 1 x Mounting kit (including fitting kit) Features: - 3mm Steel - Replaces Factory Bumper - Checker Plate ste

FITTING VIDEO AND MANUAL AT THE BOTTOM OF PAGE WHATS INCLUDED IN THE PACK: 1 x Rear bar 2 x Wheel carrier arms (Can also be used to carry jerry can holder) 1 x Rear number plate light 1 x Mounting kit (including fitting kit) Features: - 3mm Steel - Replaces Factory Bumper - Checker Plate step - Prov

ROCKARMOR GEN III REAR BAR DUAL SPARE WHEEL CARRIER Rockarmor Steel Dual Wheel Carrier To Suit Toyota Landcruiser: - HJ75, FJ75 Troopy (Wing bracket needs to be slightly modified) - HZJ78, FZJ78 Troopy - VDJ78 Troopy Workmate / GXL - VDJ76 Workmate / GXL FITTING VIDEO AT THE BOTTOM OF PAGE WHATS INC

Features: - 63mm cross tubing - LED fog lights - LED parked and indicator lights - Winch compatible - Airbag compatible - Underbody skid plate protection - Twin antenna driving light mounts Bull Bar info: Designed tested in Australia, Rockarmors Premium steel Bullbar provides your vehicle with the u

ROCKARMOR GT HOOPLESS STEEL BULLBAR COMBO - TOYOTA HILUX 2015-2020 Experience the unrivaled transformation of your N80 Hilux with the all-new, GT Bull bar from Rockarmor. The bull bar instills a captivating sense of aggression, elevating the appearance of your Hilux. Equipped with rated recovery poi

Setting up a standalone hydraulic handbrake kit can be expensive and require more commitment than what you wanted, which is why we have created an in-line hydraulic handbrake kit. The in-line hydraulic handbrake kits are significantly cheaper to setup as you don't have the additional cost of more li

The ABS module Nissan uses are renowned for being unpredictable, particularly when on track. The GKTECH ABS Delete manifold block are an easy bolt-on solution to remove the complete ABS system on your vehicle. We developed these kits after the frustration in trying to remove the ABS on our own cars.

The EBP40 is a brushless 24 volt, high flow (37litres / 9.8 gallons per minute), magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. The many EBP applications include: booster f

Buy quality products from the knowledgeable turbo specialists with 15 years in the business - Turbo Bits Brand new complete unit Direct bolt on replacement 12 Month Warranty - See terms Please check your turbo part number with the numbers below, if its not there or doesn't match it may still be comp

T2 Split Bus 1950 - 1967 Sold individually. Our reference: 211837379 Located: J19

Beetle 1957-1963 Our Reference: BBT-0749-120, 111943131B Located: B9F

T2 Split Bus 1963-1967 FREIGHT: NZ: Via Post Haste or Mainstream at owners risk. WORLDWIDE: Packing and shipping cost on application. Our reference LEFT - BBT-0890-869 RIGHT - BBT-0890-870 R84

Bushing for gearbox/starter - 12 Volt starter to 6 Volt transaxle. Used to convert a 6v gearbox housing to accommodate a 12v starter motor. FOR Beetle 1950-1967 T2 Bay 1950-1967 Karmann Ghia 1960-1967 Beetle Cabrio 1950-1967 Type 3 1962-1967 Our Reference 113301155/126, 00-4027-0, BBT-1594 EW/HG15

Buy quality products from the knowledgeable auto part specialists with 15 years in the business - Turbo Bits SCRATCH AND DENTED PRODUCT MINOR IMPERFECTIONS ON EXTERIOR. STILL WORKS AS NEW TBR Performance part - AN4 PTFE Alloy Fitting Options: 0 DEGREE 45 DEGREE 90 DEGREE Ideal for use in turbocharge

Sold as singles Part # 01527-00021 Genuine Nissan Product May not be packaged in Nissan bags.

Buy quality products from the knowledgeable turbo specialists with 15 years in the business - Turbo Bits Product Number: 312-07006-003 (3/11/16) Item Name: TOYOTA CT9 CT12 CT20 CT26 Turbocharger Water Feed / Return Flange Set Material: Steel Item : - Water Feed / Return : 4AN Kit Includes: - 1 x Tur

Buy quality products from the knowledgeable auto part specialists with 15 years in the business - Turbo Bits AN8 Swivel Fitting Options: 0 DEGREE 45 DEGREE 90 DEGREE SCRATCH AND DENTED PRODUCT MINOR IMPERFECTIONS ON EXTERIOR. STILL WORKS AS NEW ORDER TOGETHER AND SAVE - Intercooler Kits - Silicon Jo

GT HOOP STEEL BULLBAR - TOYOTA LANDCRUISER 76,78,79 2023 Circle Headlight Facelift (Full Replacement) By preserving the, iconic design of the 70 Series range of Landcruisers, Toyota has seamlessly carried its classic styling into the present-day models. Complementing this timeless appeal, Rockarmor

OEM quality, fit and performance Large range of locally manufactured products Components sourced from leading OEM suppliers in Japan, Europe and USA 3-year or 100,000km Warranty (whichever occurs first) Nissan Primera P11 SR16VE SR20VE Nissan Primera P12 SR20VE Nissan Bluebird U14 SR20VE Nissan Pul

Aeroflow's universal flexible turbo drains are designed to help you quickly and eaisly plumb up your turbodrain. Featuring -10 female swivel nuts at both ends they are easily mated to our turbo drains and block and sump fittings. Made from 304 stainless steel to protect them from turbo manifold heat

Aeroflow's universal flexible turbo drains are designed to help you quickly and eaisly plumb up your turbodrain. Featuring -10 female swivel nuts at both ends they are easily mated to our turbo drains and block and sump fittings. Made from 304 stainless steel to protect them from turbo manifold heat

Aeroflow's universal flexible turbo drains are designed to help you quickly and eaisly plumb up your turbodrain. Featuring -10 female swivel nuts at both ends they are easily mated to our turbo drains and block and sump fittings. Made from 304 stainless steel to protect them from turbo manifold heat

Speed Sensor Port Plug Lock Nut. Suits all Boosted Turbochargers, used to plug speed sensor port. M6 x 0.5mm Thread

12-21 Toyota 86 Subaru BRZ LED Low/High Beam Function. Direct fit replacement of the OEM Head lights. Sequential LED Indicator LED Park Light Black Housing with Clear Lenses DOT Approved. Fitment for GT GTS trim models (Halogen HID Model Compatible) If your vehicle is HID, this is removed on install

Beetle 1950 - 1967 Sold Individually Our reference: STANDARD - 111831421ALR, OVERSIZE - 111831421BLR, BBT-0461 Located: HG10

ROCKARMOR GT HOOP STEEL BULLBAR - NISSAN NAVARA NP300 2015-CURRENT Enhance your new Nissan Navara to new heights with Rockarmors GT bull bar specifically designed to complement the facelifted 2020 Nissan D23 NP300 Navara. The GT Bull Bar not only seamlessly integrates with the facelifted D23 model,

Work Wheels are special ordered in the colour and size to meet your specifications. These are not stocked locally and will take approximately 8-16 weeks to be manufactured and shipped from Japan. We can offer an air freight option if you prefer. Please email sales@thrashgaragenz.com for a quote. - P

The Rimpaca Ultimate Wheel Brushes combine an ultra soft and supremely fluffy synthetic wool head with the durable and ergonomic handle for a truly versatile brush set that can be used all over your car Awesome Rimpaca Features: - 3 sizes get in every nook and cranny - Supremely fluffy heads gently

Here at Franklin Performance we take pride in only delivering the highest quality of parts. Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable. In the past we have discarded these parts but we feel this is wasteful. While the parts may not l

Here at Franklin Performance we take pride in only delivering the highest quality of parts. Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable. In the past we have discarded these parts but we feel this is wasteful. While the parts may not l

These universal high quality sending units feature an all stainless steel design (including diaphragm) and are designed to be used in a wide variety of situations where accurate pressure measurement are required. Great for fuel pressure, oil pressure, manifold pressure, Features include: - 0 to 150

Glitter Laminate Decal 200x65mm High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. Design Thrash Garage NZ

Butt Stuff full holo finish. 75x75mm. High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. Design Thrash Garage NZ

Butt Stuff bubbles holo laminate finish. 75x75mm. High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. D esign Thrash Garage NZ

Holographic Planchette 118x105mm Black Silver in low light / Holographic in sunlight High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. Design Thrash Garage NZ

Holographic Decal 208x62mm High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. Design Thrash Garage NZ

Holographic Slap Decal 205x65mm High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight.

Boo-ty spot holographic finish. 76x70mm. High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. D esign Thrash Garage NZ

Senpai Peeker Decal in Stardust Holographic Finish 110x100mm High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight.

Senpai Peeker Decal in Holographic Print 110x100mm High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. D esign Thrash Garage NZ

Momo Spot Holo Decal. 145x70mm. High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. Design Thrash Garage NZ

Star Dust Laminate Decal 200x65mm High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. Design Thrash Garage NZ

Bubble Butt spot holographic finish. 76x70mm. High quality, UV rated durable. Clean area with alcohol or alcohol based cleaner before applying. Apply to cool, dry surface. Do not apply in direct sunlight. Design Thrash Garage NZ

CP offers over 140 shelf part pistons from the Sport Compact shelf line with a wide range of bore sizes and compression ratios for the most popular engines. Each of these pistons was designed through extensive research and development with the cooperation of some of the biggest names in motorsports.

O2 sensor weld on and bung options. Used for adding a new O2 sensor location, wideband O2 sensor or caping off an existing port. OPTIONS: -O2 sensor Weld-On -Hex Head Bung -Cap Head Bung -O2 sensor Weld-On Hex Head Bung -O2 sensor Weld-On Cap Head Bung Please note: All Items Thread sizes: M18x1.5 (

T2 Split Bus Kombi 1950 - 1967 Our Reference: 211711629C Located: R47G

T2 Bay Kombi 1973-1979 Our Reference 211711629M, BBT-0931-220 R47G

Heater Cable 3665mm long Heating/fresh air cable. Cable from heater control knob to both heat exchangers. FOR: Beetle Karmann Ghia 11/1962 - 07/1964 Our Reference: 111711629E, BBT-0930-06 Located: R47G

T2 Split Bus 1955-1967 Our Reference: 211711629FGR Located: R47G

Crystal Clear Bucket. Sunset Style. Serious Scratch Prevention. Take your wash control to the next level with the Rockcar Clear Bucket Sunset Orange Mitt Slide Kit. This setup pairs a completely transparent 17litre wash bucket with the boldly coloured Sunset Orange Mitt Slide, delivering both stando

Rockcar Clear Bucket Black Mitt Slide Kit See It All. Keep It Clean. Wash Safer. This kit combines two essential detailing tools to keep your wash mitt clean and your paint swirlfree. The transparent 17litre bucket lets you monitor water clarity at a glance, while the premium curved Black Mitt Slide

Rockcar Clear Bucket Mint Blue Mitt Slide Kit Crystal Clear Bucket. Mint Slide Style. Serious Swirl Prevention. Upgrade your wash routine with the Rockcar Clear Bucket Mint Blue Mitt Slide Kit. This combo gives you full visibility into your wash water with a completely transparent 17litre bucket, wh

Rockcar Premium Foam Wash Gun Kit Hose-Fit Convenience No water blaster No problem. This kit combines Autostolz Snow Foam our highest-foaming pre-wash with the Rockcar Premium Foam Wash Gun, purpose-built for a standard garden hose. Its the fastest, most convenient way to achieve a safe pre-wash foa

Orifice size 1.1mm for water blasters with 1,000 - 1750 psi / 100-130 bar. Fits Rockcar and Chemical Guys foam cannons. Stainless steel. Orifice Sizes available: 1.1mm for 1,000-1750 psi / 100-130 bar 1.25 for 1800-2600 psi / 135-180 bar 1.4mm for 2,700-4,000psi / 185-280 bar 1.7mm for 4,000-5,000ps

Orifice size 1.25mm for water blasters with 1800-2600 psi / 135-180 bar Fits Rockcar and Chemical Guys foam cannons. Stainless steel. Orifice Sizes available: 1.1mm for 1,000-1750 psi / 100-130 bar 1.25 for 1800-2600 psi / 135-180 bar 1.4mm for 2,700-4,000psi / 185-280 bar 1.7mm for 4,000-5,000psi /

Orifice size 1.4mm for water blasters with 2,700-4,000psi / 185-280 bar Fits Rockcar and Chemical Guys foam cannons. Stainless steel. Orifice Sizes available: 1.1mm for 1,000-1750 psi / 100-130 bar 1.25 for 1800-2600 psi / 135-180 bar 1.4mm for 2,700-4,000psi / 185-280 bar 1.7mm for 4,000-5,000psi /

Orifice size 1.7mm for water blasters with 4,000-5,000psi / 285-345 bar Fits Rockcar and Chemical Guys foam cannons. Stainless steel. Orifice Sizes available: 1.1mm for 1,000-1750 psi / 100-130 bar 1.25 for 1800-2600 psi / 135-180 bar 1.4mm for 2,700-4,000psi / 185-280 bar 1.7mm for 4,000-5,000psi /

Dimensions (approx.) Length 60 cm x Width 15 cm x Height 15 cm

Includes Silicon joiners, hose clamps, screws, guard template, instruction sheet

Package Contents 4" snorkel, silicon joiners, hose clamps, screws, guard template, instruction sheet

Compatibility Toyota Land Cruiser 200 Series 2017-2022

Weight 12 kg

Stock Location New Zealand, GST included

Delivery Nonrural 13 days, Rural 25 days

Warranty 30day return, satisfaction guarantee

Stock In New Zealand, GST included

Return Policy 30 days return, satisfaction guarantee

Template Cutting template provided

Template Comes with cutting template

Included Parts Mounting studs, screws, washers, clips, cutting template

Compatibility Toyota Land Cruiser 200 Series 2017-2022

Fitment Recessed into guard, matches body shape

Condition Brand new and unused

Warranty 30 Days return, Satisfaction Guarantee

Template Comes with cutting template

Included Parts Mounting studs, screws, washers, clips, cutting template

Mounting Kit Includes studs, screws, washers, clips and cutting template

Stud Layout: 15mm thread / 10mm shank / 15mm thread Nut: Serrated Flange Nut

STUD NUT KIT - M10x1.5 kit 40mm - Copper flashed Stud Layout: 15mm thread / 10mm shank / 15mm thread Nut: Serrated Flange Nut

STUD NUT KIT - M8X1.25 KIT 40mm STUD Stud Layout: 10mm thread / 10mm shank / 20mm thread Nut: Serrated Flange Nut

The Mitt Slide is a new product made in Korea, and is a huge step up on previous models. We are a big fan. It is curved so it doesn't just sit in the bottom, but curves up the side, so that you can easily wash the grip off your wash mitt as you put it in the bucket. The gaps are tapered to the grit

INTERCOOLER SPECS: Core Size(mm): 280mm x 300mm x 76mm Overall Size Approx(including Inlet&Outlet): 460mm x 330mm x 80mm Inlet/Outlet: 76mm(3'') The thread size of the installation hole: M8 1.25 Design: Bar Plate UNIVERSAL INTERCOOLER

Buy quality products from the knowledgeable turbo specialists with 15 years in the business - Turbo Bits Universal Application: Core size: 500mm x 180mm x 65mm End Tank to End Tank length 600mm Hose End to Hose End length 650mm 2.5" Inlet / Outlet. Pressure tested to 140psi. Bar and plate design. Fe

Buy quality products from the knowledgeable turbo specialists with 15 years in the business - Turbo Bits Brand New turbo gasket set only We also have brand new complete replacement turbochargers in stock for this model

Buy quality products from the knowledgeable turbo specialists with 15 years in the business - Turbo Bits Boost Quick Tap Fitting Kit / Pressure Source on Silicon Hose Easy and quick install into rubber/silicone hose without hassle of drilling and tapping the turbo housing. This fitting takes 5mm ID

TS-0554-1002 The GenV WG50 ProGate50 External Wastegate is a Motorsport-proven, cost-effective 50mm external wastegate The Highest Flowing 50mm External Wastegate in the World The GenV provides extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in

Filter for some Parmco Midea downdrafts, 190 x 398mm: PARMCO: DD-600RR-G MIDEA, VOGUE: 330274/ADF-F28A

TDX LED spotlight, track mounted, 13 watt: - SR800D-13W-4KBK - 4000k cool white - 230-240V AC

TDX LED spotlight, track mounted, 30 watt: - RAV30TRE09-ZAS3 - 5000k cool white - 110-265V AC

Please note from MY2017 this Bullbar will not suit Single Cab 79 Series models. GT HOOP STEEL BULLBAR - TOYOTA LANDCRUISER 76,78,79 2007-2023 (Full Replacement) By preserving the, iconic design of the 70 Series range of Landcruisers, Toyota has seamlessly carried its classic styling into the present

Temperature limiter for some dryers. Rated 125 degrees C, this is the safety thermostat that controls the element circuits: ROBINHOOD: RHSD7W MIDEA: MDS60-2501 VOGUE: 368171 Temperature Limiters Explained

Inner door glass fitted to some early versions of these 90cm ranges, 760 x 413 x 4mm, with retaining clips. Note this glass will only fit some versions of these models, please carefully check dimensions: PARMCO: AR900 series EUROTECH: EURFSG90, EUR-FSG90 EUROMAID, TECHNIKA: B9GEFTSS-3 B9GEFTSS-3LPG

Inner door glass fitted to some 60cm ranges, 484x437x4mm. There are several versions of the door fitted to these models, please check the dimensions carefully: EUROTECH: EUR-FSC60

Drain hose fitted to the following makes and models of washing machine: PARMCO: WD106WF,WM8WF,WM10WF02

Lower basket fitted to the following model dishwashers: TRIESTE: TRD-ID12 EUROMAID: E14DWB

Buy quality products from the knowledgeable turbo specialists with 15 years in the business - Turbo Bits Part No: 709837-5002S ALTERNATE PART NUMBER: 709837-0001 709837-5001S709837-0003 709837-5003S OEM PART NUMBER (MERCEDES): A6120960299 6120960299 VEHICLE INFORMATION Vehicle Manufacturer: Mercedes

Ceramic hob element, 1200 watt, 230 volts AC, 140mm 165mm full width, for some ceramic cooktop freestanding range models: EUROMAID: EFS54FC-DCW, EFS54RC-DCB, EFS54RC-DCW PARMCO: FS54CER TECHNIKA: B9GEFTSS-5, B9GEFTSS-5LPG, BAF90EG-2, BM90S, EC64GB, EC64GS, EC74GTB, EC95GLB, EC95GLS, EG90S, EGE9TBK,

Our new HyperGate45 are a direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 NPT ports, and are provided with the full range of springs. Upgrades and Servicing Due

Used filter in good condition Robinhood aluminium mesh replacement filter, 508 x 172mm, plain (no locating tabs or catch) for these models: ROBINHOOD: CHATEAU SERIES, RO6WH, RO6SS, RO61WH, RO61SS, RO6WH80, RO6SS80 RO61SS, RO61WH, RO61/80 F&P: SB600 RH600SO, HS60CIW1 80533, HS60CIW1 80462 89151, HS60

Buy quality products from the knowledgeable turbo specialists with 15 years in the business - Turbo Bits Billet Turbosmart Turbo Oil Drain Mounting Bracket. It is made from high-quality 4130 chromoly steel, which provides exceptional weldability and strength. These turbo oil drain mounts allow fabri

Genuine Bosch rangehood LED light (called a halogen light by Bosch in error), 700mA, 3500K warm white, for the following rangehoods: BOSCH, NEFF: 3BF255NG/01 3BF266NX/01 3BF276NG/01 3BF276NX/01 CD75132/01 D5655X1/01 D5655X1/02 D5655X1GB/01 D5655X1GB/02 D5655X2/01 D5655X2GB/01 D5855X1/01 D5855X1/02 D

Beetle 1967-1979 Our reference STANDARD - 111831421H, BBT-0475-1 OVERSIZE - 111831421K, BBT-0475-3 HG11

Beetle 1950-1967 Our reference STANDARD - 111831421 OVERSIZE - 111831421A HG12

T2 Split Bus 1955-1962 Our Reference 211955231, BBT-0397-019 A19B

T2 Split Bus 1962-1967 Our Reference BBT-0397-020 A19B

Beetle Cabrio 1950-1971 Our Reference 114701131, BBT-0876-506 R79

T2 Split Bus 1961-1962 Our reference 211881897, BBT-7485-060 C19

T2 Split Bus 1962-1967 Our reference 211881897A, BBT-7485-100 C19

Beetle Our reference BBT-0401 B11F

Type 3 1962-1973 Our reference 113867649, BBT-2930 A25

36hp camshaft - FOR Our reference BBT-1629-90 i4

SOLD AS PAIRS (Left Right) Full Brand-New Remanufactured complete front callipers, full bolt-on part

SOLD AS PAIRS (Left Right) Full Brand-New Remanufactured complete front callipers, full bolt-on part Some callipers may not come with the Nissan logo and have a flat face.

PART NUM -36010-65F10

PART NUM - 58280-14080

Part Num - 55650-14130

PART NUM - 88280-14030

PART NUM - 12121-46030

PART NUM - 53630-14300

PART NUM - 44311-22091

SUITS LEFT OR RIGHT PART NUM - 48553-14050

part num - 85515-14010

part num - 7716914030

Genuine Toyota Supra JZA80 Front Bumper Side Indicators PART NUM - 81751-14080 -81731-14080

PART NUMS - 53410-14130-53420-14100

SUITS LH SIDE PART NUM - 69206-14080-C0

SUITS RH SIDE PART NUM - 69205-14080-C0

WILL SUIT BOTH SIDES PART NUM - 69410-33040

Part Num - 53510-14240

WILL SUIT VVTI AND NON-VVTI MOTORS PART NUMS - 17198-46010- 17173-46040

ALL GASKETS AND SEALS INCLUDED TO REFRESH OE TWIN TURBOS PART NUM - 04175-46021

PART NUM- 13521-46040

WILL SUIT LH INTERIOR DOOR HANDLE FRONT AND REAR PART NUM - 69278-22050-C0

PART NUM - 23206-46140

PART NUM - 11494-46010

SOLD PRE STUD PART NUM - 90126-08046

PART NUM - 53630-22230

Genuine TOYOTA JZA80 MK3 Supra Turbo Badge PART NUM -75443-14180

RockCar M22 Standard Male to Karcher Quick Release Hose Adapter Type 1 This adapter fitting has the M22 Standard male thread at one end (the same thread that connects to the RockCar flexible green hose) and a Karcher quick release hose fitting at the other end. Construction Quality Material: Solid

RockCar M22 Standard Male to Quick Release Hose Adapter Type 5 This adapter fitting has the M22 Standard male thread at one end (the same thread that connects to the RockCar flexible green hose) and a quick release hose fitting at the other end, common on Daewoo, Bort, Patriot, and other machines.

RockCar M22 Standard Male to Quick Release Hose Adapter Type 2 This adapter fitting has the M22 Standard male thread at one end (the same thread that connects to the RockCar flexible green hose) and a quick release hose fitting at the other end, common on some Stihl, Nilfisk, Makita, Ryobi, Bosch,

RockCar M22 Standard Male to Quick Release Hose Adapter Type 3 This adapter fitting has the M22 Standard male thread at one end (the same thread that connects to the RockCar flexible green hose) and a quick release hose fitting at the other end, common on some Lavor, Braggs, Parkside, Vax, Craftsma

RockCar M22 Standard Male to Quick Release Hose Adapter Type 4 This adapter fitting has the M22 Standard male thread at one end (the same thread that connects to the RockCar flexible green hose) and a quick release hose fitting at the other end, common on some Black Decker, A&R, and other machines.

Stainless Steel HighPressure Fitting " Quick Connect Male This is a highquality stainless steel highpressure fitting designed for durability and performance. Compatibility Same thread as the RockCar Stealth Foam Cannon, Chemical Guys Big Mouth Foam Cannon, and most foam cannons on the market Connec

M2214mm Adapter with inch Quick Connector Upgrade your water blaster setup with this adapter to add quick release. Designed for ease of use and compatibility, it converts an M2214mm fitting into a inch quick connector, making it simple to attach foam cannons, hoses, and other detailing accessories.

Ryobi Ozito Shorter Flatter Adapter Trigger Section Connection This is a new adapter designed to suit some (not all) recently released Ryobi and Ozito models. Adapter Fitment This is a shorter, flatter adapter made specifically for the updated fittings on certain Ryobi and Ozito water blasters. We

Lavor Twist Lock Adapter Universal Quick Release Conversion You want to use a Foam Cannon and start making thick snow foam, but your Lavor water blaster has a special twist lock connection instead of a universal quick release Weve got you covered. Adapter Fitment This adapter clicks directly into t

RockCar M14 Adapter Connect Chemical Guys Snubby to Bosch Water Blaster If you have a Chemical Guys Snubby and a Bosch water blaster and are trying to figure out how to connect them, this is the adapter you need. Construction Quality Inner components: Precisionbuilt aluminum for strength and durabi

RockCar M22 MaletoMale Adapter Solid Brass Connector Sometimes you just need a solid, nononsense connector that works every time. The RockCar M22 MaletoMale Adapter is designed for exactly that joining two M22 female fittings together with ease. Whether youre extending two RockCar 10m AntiKink Flex

Lavor Twist Lock Adapter Universal Quick Release Conversion You want to use a Foam Cannon and start making thick snow foam, but your Lavor water blaster has a special twist lock connection instead of a universal quick release Weve got you covered. Adapter Fitment This adapter clicks directly into t

RockCar M14 Adapter Bosch, Ava, Ryobi, Dewalt, Nilfisk, Husqvarna Compatibility Hose Compatibility Connects to the hose of most Bosch, Ava, Ryobi, Dewalt, Nilfisk, and Husqvarna water blasters. If you have a Chemical Guys Snubby and a Bosch water blaster and are trying to figure out how to connect

Stihl Gerni Twist Lock Adapter Convert to Universal Quick Release Want to use a Foam Cannon and start making thick snow foam, but your Stihl waterblaster has a special rounded twist lock connection instead of a universal quick release Weve got you covered. Compatibility Fitment Stihl Models: Some S

Female Quick Connect Fitting Compatible with #5 Male Fitting. This female quick connect fitting is designed to pair with the #5 male fitting, providing a secure and reliable connection for your car wash setup. In New Zealand, this adapter is compatible with some (not all) newer Ryobi and Ozito model

This is the often hard to find missing link adapter. This is the connector you need to connect the Chemical Guys Snubby or Rockcar Trigger to the Rockcar Hose quick connectors. M22-14mm male;G3/8 male High Quality, solid brass.

Upgrade Your Pressure Washer with the Ultimate 10m Flexible HighPressure Hose Enhance your cleaning efficiency with our premium 10meter flexible water blaster hose upgrade, designed to eliminate the frustrations of standard hoses. Key Features KinkResistant Design: Flexible structure prevents kinks

Please check the dimensions shown in the product image before placing your order. This ensures compatibility with your foam cannon and avoids delays with or exchanges.

Compatibility Ford Ranger 2022 (New Ranger)

Installation Easy installation

Warranty 30 Days return accepted

Installation Easy installation

Weight 12 kg

Warranty 30 Days return

Stock Location New Zealand

Warranty 30 Days return accepted, Satisfaction Guarantee

Fitment Ford Ranger PX3 Wildtrak 2018-2021

Warranty 30 Days return accepted, Satisfaction Guarantee

Fitment Toyota Hilux 2015-2020

Warranty 30 Days return accepted, Satisfaction Guarantee

Weight 18 kg

Weight 12 kg

Weight 12 kg

Weight 12 kg

Warranty 30 Days return accepted, Satisfaction Guarantee

Brand Ute Off-Road

Weight 18 kg

Weight 18 kg

Warranty 30 Days return accepted, Satisfaction Guarantee

Weight 18 kg

Mounting Hardware Bolts and lamp brackets included

Return Policy 30 Days return, Satisfaction Guarantee

Installation Original Hole Installation

Included hardware Mounting bolts and lamp brackets

Mounting Hardware Included (bolts and brackets)

Weight 18 kg

Weight 18 kg

Installation Original Hole Installation with mounting hardware included

Mounting Hardware Included bolts and lamp brackets

Weight 18 kg

Installation method Original Hole Installation

Weight 18 kg

Weight 18 kg

Weight 18 kg

Included Hardware Mounting bolts and brackets

Weight 18 kg

Mounting Hardware Included

Weight 18 kg

Return Policy 30 days return, satisfaction guarantee

Weight 18 kg

Weight 12 kg

Package Contents 1 x Bonnet protector, 1 x set of mounting hardware

Mounting All hardware included, no drilling required