Southern Performance Claim this Business♡
×-
$499Trundles Diff Drop Kit to suit Nissan Navara D22 1997-2008Includes:1x Navara D22 Diff Drop System -�NAV-014Details:Our Trundles Diff Drop is a solution that allows lowering of the diff to reduce CV angle when a lift is installed. The front OE pressed steel X-member is replaced with a solid Xmm CNC machined X-member and is designed to bolt into position w...Buy from Store 0 0
-
$150Blackhawk 4 Port Diff Breather Kit to suit Multiple VehiclesIncludes:1x 4 Port 4WD Breather Kit - DB4001 (1/8 BSP)Details:- To suit: Toyota, Nissan, Isuzu and Holden- Stops water entering your differentials, transmission and transfer depending upon fitment options.- Suits for 2 port or 4 port installation.- Quality 8mm breather hose in spring style design fl...Buy from Store 0 0
-
$1,570Profender 40mm Gas Lift Kit to suit Nissan Navara D23 NP300 (Coil Rear) 2015-OnwardsProfender 40mm Lift Kit — Nissan Navara D23 NP300 (Coil Rear) 2015-OnwardsLift your NP300 with this Profender 40mm suspension kit, purpose-built for the D23 Navara platform. Front shocks come pre-assembled for a straightforward install, and twin tube shock absorbers are included front and rear.Imp...Buy from Store 0 0
-
$3,750Profender 75mm Gas Lift Kit to suit Ford Ranger PX3 2018-2022DETAILSWe strongly recommend you run an adjustable coil over when opting for a 75mm front lift. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and/or winch in future), and gives you the ability to make any adjus...Buy from Store 0 0
-
$1,430Profender Gas Rear Lift Kit to suit Ford Ranger PX3 2018-2022DETAILSDesigned to complement our front lift kits, our rear lift kits provides the perfect finishing touch for a fully lifted vehicle along with the added benefits of increased load rates and stability over our basic rear lifts and extended shackles.Please use the drop down menu to select your lift...Buy from Store 0 0
-
$899Profender Pre-Assembled Front Gas Lift to suit Ford Ranger PX3 2018-2022DETAILSWe strongly recommend you run an adjustable coil over when opting for a 75mm front lift. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and/or winch in future), and gives you the ability to make any adjus...Buy from Store 0 0
-
$1,065Safari Armax Snorkel to suit Toyota Landcruiser 300 Series 2021-OnwardsSafari Armax Snorkel to suit Toyota Landcruiser 300 Series 2021-OnwardsFits all models except GX (GX Model - Independent Kit)Includes:1x Safari Armax Snorkel - SS98HPDetails:- Suits 3.3L V6TT Engine- Safari ARMAX 4" Air Ram with an optimised airflow, low restriction grill- Australian designed, mould...Buy from Store 0 0
-
$1,225Trundles 4" Stainless Snorkel to suit Toyota Landcruiser 100 Series 1998-20074" Trundles Stainless Snorkel to suit Toyota Landcruiser 100 Series 1998-2007Trundles Airbox also available to suit 100 Series LandcruiserPlease select your desired snorkel colour and add on optionsIncludes:1x Snorkel1x Fitting KitDetails:- Single piece seamless snorkel- Available in a raw or powder...Buy from Store 0 0
-
$1,399Trundles 4" Stainless Snorkel to suit Ford Ranger Raptor Gen1 2018-20224" Stainless Snorkel to suit Ford Ranger Raptor Gen1 2018-2022This snorkel was designed specifically to suit the Diesel Bi-Turbo model, no testing has been done to confirm if compatible the V6 Petrol variantIncludes:1x Snorkel - SNORK-15/BLK1x Fitting Kit - SNORKFIT-RAPTORDetails:- Single piece seam...Buy from Store 0 0
-
$1,299Superwinch Tiger Shark 11500 12vIncludes:1x WinchDetails:One of Superwinch's most popular winches, the Tiger Shark 11500 is the benchmark for performance winching while not breaking the bank. From powerful motors, to strong gears to long-life stainless steel parts, the Tiger Shark 11500 stands out from the competition. It is easy...Buy from Store 0 0
-
$50Trundles Winch DamperTrundles Winch Safety DamperIncludes:1x Winch Damper - TWWDDetails:- Material: Heavy duty vinyl, Hi-Vis reflective tape- Weight: 1.1kg- Held in place on the rope with velcro tapeMore Information:In the unlikely event of a rope, cable or strap snapping, the damper will act as a brake and absorb the e...Buy from Store 0 0
-
$50Trundles Recovery Winch Ring - 10,000kgIncludes:1xDetails:- Sturdy snatch recovery ring with approximately 22,050Lbs/10,000kg Break Strength.- Made of high quality 6061 Aluminum Alloy- Portable & Lightweight, each on is only 0.62kg.- Minimize Friction Wear- Outer Thickness: 40mm- Inner Thickness: 23mm- OD: 120mm- ID: 36mmMore Info:This h...Buy from Store 0 0
-
$50Trundles Rear Recovery Tow HitchTrundles Recovery Hitch 24mm HoleIncludes:1x Rear Recovery Hitch - THW-01Details:- Heavy Duty Rear Recovery Tow Hitch featuring Twin Mounting Holes for either vertical or horizontal mounting depending on recovery angle.- Destruction tested to WLL5000kgs, and designed to suit a HEAVY DUTY tow bar wit...Buy from Store 0 0
-
$1,350Dobinsons 12000LBS Winch with Synthetic RopeDobinsons 12,000LBS Winch with Synthetic RopeIncludes:- 1x Dobinsons 12,000LBS Winch w/ Synthetic Rope with Hook,- Aluminum Hawse Fairlead- Hand Held Control and Wireless Remote (30ft Range)- Various Control Box Mounting Brackets�(Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops...Buy from Store 0 0
-
$45Trundles Snatch Block 10TTrundles Snatch BlockIncludes:1x Trundles Snatch Block - TWSB10TDetails:- Rated Capacity 10TMore Information:Reduce the load on your winch to perform recoveries or to avoid damage when changing cable direction.Buy from Store 0 0
-
$40Trundles Soft ShackleIncludes:1x Soft Shackle - TWSSDetails:is a lightweight but strong alternative to traditional steel bows and D shackles.14,000kg minimum breaking strength.Buy from Store 0 0
-
$40Trundles Rapid Tyre DeflatorIncludes:1x Rapid Tyre Deflator - TWRTDDetails:deflates in a matter of seconds and allows to easy removal of the valve core, providing speedy and accurate tyre deflation.Buy from Store 0 0
-
$199Trundles Essential Recovery KitIncludes:1x 8T Snatch Block2x 4.75T Bow Shackles1x 11,000kg Snatch Strap1x Winch Damper1x Tree Trunk Protector1x Pair of Gloves1x Canvas Carry BagDetails:- Essential Kit for all your off road adventuresBuy from Store 0 0
-
$450Dobinsons Air Compressor 170LPMIncludes:1x - AC80-3846Details:- 170L/ minute Air Flow.- Integrated Air Tank- 2 x 1/8" NPT Auxiliary fittings- Carry Bag- 6.5 m Rubber Hose- Pressure Cut Off Switch- Safety Release Valve- Removable Base for Permanent Mounting- Quick Release Tyre ChuckSpecifications:- Nozzle Adapters: Pressure Gauge...Buy from Store 0 0
-
$1,200Trundles 4" Stainless Snorkel to suit Holden Colorado RG 2012-20204" Stainless Snorkel to suit Holden Colorado RG 2012-2020Includes:1x Snorkel - SNORK-13/BLK1x Fitting Kit - SNORKFIT-RGDetails:- Single piece seamless snorkel- Available in a raw or powder coated black finish- Designed and manufactured in house- All snorkels come with a Trundles Rain Deflector Band-...Buy from Store 0 0
-
$1,250Trundles 4" Stainless Snorkel to suit Holden Colorado RC 2008-20124" Stainless Snorkel to suit Holden Colorado RC 2008-2012Includes:1x Snorkel SNORK-111x Fitting Kit SNORKFIT-RCDetails:- Single piece seamless snorkel- Available in a raw or powder coated black finish.- Designed and manufactured in house at Trundles.- All snorkels come with a Trundles Rain Deflector...Buy from Store 0 0
-
$1,150Trundles 4" Stainless Snorkel (Long Entry) to suit Nissan Patrol Y60 1987-1998Trundles 4" Stainless Long Entry Snorkel to suit Nissan Patrol Y60 GQ 1987-1998Trundles Airbox also available to suitPlease select your desired snorkel colour and add on optionsIncludes:1x Snorkel - SNORK-201x Fitting Kit:-Factory Airbox SNORKFIT-GQLE-1-Trundles Airbox SNORKFIT-GQLE-2Details:-Single...Buy from Store 0 0
-
$1,100Dobinsons Pre-Assembled Gas Front Lift to suit Mazda BT-50 Series II 2011-2020We strongly recommend you run an adjustable coil over when opting for a 75mm front lift. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and/or winch in future), and gives you the ability to make any adjustments...Buy from Store 0 0
-
$899Profender Pre-Assembled Gas Front Lift to suit Mazda BT-50 Series II 2011-2020We strongly recommend you run an adjustable coil over when opting for a 75mm front lift. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and/or winch in future), and gives you the ability to make any adjustments...Buy from Store 0 0
×