Techstyle 9 views   8 clicks ♡

The Do Not Use! loads may be used if combined loads 1 through 4 do not exceed the 1920W limits and individual loads do not exceed the limits in the table.Vantage Controls products may only be purchased by Certified Installers. If you would like more information about becoming a Certified Installer o...

The Relay Station Lighting - DIN is designed to control lights and provides eight isolated latching relay channels. The RS8-L-DIN accepts voltage from 0 to 277 volts and up to 10amps at each load. The relays are single-pole, single throw, offering a set of eight latching contacts. This station may a...

The Relay Station - DIN provides relay for up to eight individual loads. Four SPST and four SPDT relays provide hardware interlock installations. Each of the eight relays are designed to handle up to ten amps of either high or low voltage current. Actuator buttons allow the connected relays to be ma...

Country of Origin China

The 0-10 PWM Low Voltage Output Station-DIN is used for the control and automation of LED, CLF and CCFL lighting loads requiring either 0-10 or PWM for dimming control.Each LVOS DIN features eight 0-10 outputs with four that can be turned into PWM outputs. The LVOS DIN is firmware upgradable in the...

The 0-10 PWM Low-voltage output station (LVOS) is used for the control and automation of LED, CFL, and CCFL lighting loads requiring either 0-10 or PWM for dimming control. The dry contact inputs can be used with motion sensors, light sensors, pressure sensors, IR inputs, magnetic switches, and more...

The InFusion Secondary Power Enclosure (ISPE) is a key component ofVantage’s lighting control centralized solution. The ISPE economicallyextends the load capacity of the Vantage System, extending systemcapacity from the Main Power Enclosure (IMPE). Up to six SecondaryEnclosures can be connected to...

Country of Origin China

This male-to-female cable extends the length between the power supply and cooling unit by 2.8m.

This adapter plugs inline between the power supply and two cooling and/or ventilation units. The leads are approximately 24" in length. Ensure when powering multiple units that an appropriate power supply is used. Package also includes one 2.1mm x 5.5mm DC Plug (PA-PLG-21).

This adapter plugs inline between the power supply and two cooling and/or ventilation units. Depending on the application, you may need to use extension cables (PA-EC) or use the Y-Cable with longer leads (PA-YC-LL).Please note: Polarity must be observed on all of our products. On the ends of the co...

Overview(LS-WNRS) is a magnetic in-wall retrieval kit built for “blind" cable fishing through finished walls and ceilings. It’s designed for retrofit runs where you can’t see the pathway, helping you connect an entry point to an exit point faster and with less frustration. Features- 24" flexib...

OverviewThe LS-WEMINI Wall-Eye™ Mini is a compact inspection viewer with an integrated flashlight, designed to let installers see inside wall cavities, ceilings, and voids before drilling or cutting. It allows visual confirmation of obstructions through a small access hole, helping reduce mistakes...

OverviewThe LS-GR-MINI Grabbit Mini is a compact telescoping pole designed to push, guide, and retrieve cables in tight, limited-access spaces. It extends to 10 ft (3048 mm) for reach in ceiling voids and wall cavities, and collapses down to 22" (559 mm) for easy carry and storage. It is a practical...

OverviewThe LS-GR3BB is a standalone 3 ft (914 mm) FiberFuse fiberglass push/pull rod with bullnose metal tips at both ends, designed for pushing or pulling wire through wall cavities, ceiling spaces, and other tight pathways. It is an economical “grab-and-go" rod for short runs where you want con...

OverviewThe LS-GR12 is a 12 ft (3.66 m) fiberglass push/pull rod designed for guiding, pushing, and retrieving low-voltage cables through wall cavities, ceiling voids, and other confined spaces. It provides additional reach over shorter rods while maintaining controlled flexibility for accurate rout...

OverviewThe LSDi Premium Freeform Masonry Bit (LS-FFMB3836) is a heavy-duty percussion masonry drill bit built for clean, accurate drilling through masonry materials. It features a 118° carbide tip for precise feeding and cleaner holes, and is fabricated in the USA by Freeform to LSDi standards. Fe...

OverviewThe LS-FF3872F is a Freeform flexible auger bit designed for long, curved drilling paths through timber framing and wall cavities. With a length of 72" (1829 mm) and a 3/8" (9.5 mm) diameter, it allows installers to drill through multiple studs or plates from a single access point, making it...

OverviewThe LS-FF3848F is a Freeform flexible auger bit designed for drilling long, curved paths through timber framing and wall cavities during retrofit installations. With a length of 48" (1219 mm) and a 3/8" (9.5 mm) diameter, it allows installers to reach across multiple studs from a single acce...

Premium freeform bit 1/2" x 72" (12.7mm x 1828mm)

OverviewGeorge Risk Industries 6644 (LS-GRI-6644) is a ready-to-install resistor pack used on supervised alarm contact loops. It combines two resistors in a compact packaged assembly, saving time versus soldering loose resistors in the field and helping keep installs consistent. Features- Pre-built...

OverviewThe CZ-BL3 LSDi 3' Luminous Bullnose Rod is a flexible, glow-in-the-dark fiberglass rod designed for pushing, guiding, and retrieving cables through walls, ceilings, and other confined spaces. Its compact length and rounded bullnose tip make it ideal for controlled cable runs where precision...

OverviewZ Tip - Male Threaded Connector Tip (LS-ZTIP) is a threaded “touch-and-retrieve" accessory designed for wire deep inside tight cavities where fingers and standard hooks cannot reach. It is built to work with compatible threaded rod systems and telescoping poles, letting you grab, hold, and...

Temperature display with blue LED temperature display – CelciusRequires 1 x 12v 2 A switch mode power supply includes 6 x interchangeable power connectors. Sold separately.