Shop for all in Measuring equipment repair and maintenance

Availability: This item is usually despatched same day The ZB8T is one of the most powerful and technologically advanced flashlights in the Zweibrder range, combining high power, advanced focusing options, intuitive controls, and robust construction, making it suitable for outdoor enthusiasts as wel...

AVAILABILITY: This item is usually dispatched same day The Core W12 Soil Impact Tester is a quick, non-invasive device used to verify uniform soil compaction across large job sites. The Core W12 Soil Impact Tester can identify poorly compacted areas, allowing ground work issues to be remedied as the...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This ex-demo staff is in 9/10 condition (photos are generic and not of the actual item). 6 section, 7.6 meter telescopic fibreglass staff with surveyors E-Face 10mm graduation and a height...

AVAILABILITY: This item is usually dispatched same day The Trilex MET-Y02 breaks the barrier between cost and a top quality theodolite. 10 second accuracy makes the Trilex MET-Y02 ideal for building, construction, contracting and set out. We have selected this instrument over many other brands, as i...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This tribrach is in near new condition as pictured. The best quality tribrach available. Complete with bulls eye bubble, smooth accurate clamping and an optical plummet for precise setup o...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This tribrach is in near new condition as pictured. The best quality tribrach available. Complete with bulls eye bubble, smooth accurate clamping and an optical plummet for precise setup o...

AVAILABILITY: This item is usually dispatched same day The Crains Stedi-Rest, a clever multi purpose tool that can act as a rod/pole rest to keep your gear off the ground when not in use, you can put it on a tripod to help rotate your pole to adjust the bubble or even use it to create a bipod to hol...

AVAILABILITY: This item is usually dispatched same day Even stronger than the original case, these after-market, reinforced transport road cases have a plywood core to help prevent the handle and latches from tearing out when the case has been wet or damaged. Fits most models of 4.5kg SDI Clegg Soil...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This moisture meter is in good condition as pictured. The world's original and best-selling dual-function moisture meter with both pin and non-invasive measurement capabilities. This versa...

AVAILABILITY: This item is usually dispatched same day The all new re-designed Trilex DT-02 breaks the barrier between cost and a top quality water resistant theodolite. 12 second accuracy makes the Trilex DT-02 ideal for building, construction, contracting and set out. We have selected this instrum...

AVAILABILITY: This item is usually dispatched same day Replacement bubble assembly, complete with mounting screws to fit the Topcon Laser Receiver Holder 6 sensor clamp. FEATURES: - Comes complete with mounting screws - Double sided bubble vial for viewing from above and below SPECIFICATIONS: - Suit...

AVAILABILITY: This item is usually dispatched same day Replacement square style button for Myzox level staves. These spring loaded locking buttons are a direct replacement for Myzox level staves with MG-04 printed on the original buttons. Not compatible with other brands or models. FEATURES: - High...

AVAILABILITY: This item is usually dispatched same day Replacement square style button for Myzox level staves. These spring loaded locking buttons are a direct replacement for Myzox level staves with MG-02 or MG-02A printed on the original buttons. Not compatible with other brands or models. FEATURE...

Availability: This item is usually despatched same day Connect your Forerunner 405/310XT to this charging clip, which has a USB plug for convenient charging of your watch via your computer. FEATURES: - Standard USB Plug

AVAILABILITY: This item is usually dispatched same day This is a clearance product with limited stock available. An economy priced 6 section, 7.6 meter telescopic fibreglass staff with surveyors E-Face 10mm graduation and a height scale on the back. Constructed from tough, rigid fibreglass with rein...

AVAILABILITY: This item is usually dispatched same day The Leica Style GMP111-0 is a zero constant mini prism, mounted in polymer holder with 1/4" thread fittings. With an in-built circular bubble, the set comes complete with a four-section pole and point that expand your surveying capabilities. INC...

AVAILABILITY: This item is usually dispatched same day Stainless steel adapter, M8 male thread to standard survey male 5/8x11. FEATURES: - Stainless steel SPECIFICATIONS: - Lower thread: 8mm male - Upper thread: 5/8x11 male - Construction: Stainless Steel - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day With all the features of GMEs AccuSat MT610G, but with the addition of "Return Link Service". This service allows the PLB user to receive a confirmation signal back after their distress alert has been received and their location has been detecte...

AVAILABILITY: This item is usually dispatched same day Replacement Topcon Legs (sold individually) for TP-L3, TP-L4, TP-L5 and TP-L6 models. Each foot is machined metal with a rubber end cap for grip and stability. Available to suite 150, 200, 250 and 300mm pipe centring. FEATURES: - Enables precise...

AVAILABILITY: This item is usually dispatched same day Replacement Li-Ion Battery for Nedo X-Liner 3D laser levels (also suits a number of other brands and models). FEATURES: - 7.4V - 2,600 mAh SPECIFICATIONS: - Suits models: - Nedo: X-Liner 3DR - Huepar: 603CG / 603CR / 602CG / 602CR - Spot-on: Las...

AVAILABILITY: This item is usually dispatched same day Replacement mains AC/DC power adapter for Spot-on Powerline 3DR MKII / 3DG model laser levels. FEATURES: - Plug-in wall power supply SPECIFICATIONS: - Suits: Spot-on Powerline 3DR MKII / 3DG - Input: 100-240V~, 50-60Hz - Output: 5V DC, 2000mA -...

AVAILABILITY: This item is usually dispatched same day Replacement battery charger for Stonex R15/R35 total stations. FEATURES: - High quality plug-in wall charger SPECIFICATIONS: - Suits Models: Stonex R15 R35 - Input: 100-240V~, 50-60Hz - Output: 8.4V DC, 2A - Wall plug: NZ/Australia - Warranty: 9...

AVAILABILITY: This item is usually dispatched in 2-3 days Pair of genuine GE Protimeter BLD5070 EIFS Probe replacement screw in needles. SPECIFICATIONS: - Total Length: 130mm - Tip to base of shaft: 110mm

AVAILABILITY: This item is usually dispatched same day Make installing track, lighting and ceilings easier and more accurate by attaching your X-Liner laser directly to the wall. If the work site is just too busy to risk your laser getting knocked over, then just put it up on the wall out of harms w...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This set is ex-demo and in near new condition. AVAILABILITY: This item is usually dispatched same day The Trilex GC100 2D Grade Control system uses your laser to give level or grade to pro...

AVAILABILITY: This item is usually dispatched same day No more bending down to mark the ground. This handy applicator wand lets you apply paint at the squeeze of the trigger. Fits all Spraywell 400ml cans. Simply insert the can into the wand, point at the ground and pull the trigger. FEATURES: - Fit...

AVAILABILITY: This item is usually dispatched same day. The S590 is a versatile GNSS receiver featuring a multi-constellation system that supports GPS, GLONASS, BeiDou, Galileo, QZSS, and IRNSS, with advanced PPP correction services available. It delivers centimeter-level accuracy through sophistica...

Download Brochure AVAILABILITY: This item is usually dispatched same day. The S80G is a GNSS system that offers a range of features and capabilities for efficient data and photo collection in the field. It is a multi-constellation system, meaning it can utilize signals from multiple satellite netwo...

AVAILABILITY: This item is usually dispatched in 1 to 2 days Topcon original rechargeable battery pack for RL-H4C, RL-SV1S and RL-SV2S Laser Levels. FEATURES: - Topcon Factory original SPECIFICATIONS: - Compatible with: Topcon RL-H4C, RL-SV1S and RL-SV2S models - Charger: AD-17 (sold seperately) - T...

Availability: This item is usually despatched same day Top quality Topcon style single tilting prism, complete with target and carry case. Compatible with Topcon, Sokkia or any other standard full size prism reflectors. Plastic body in an aluminium yoke, complete with a built in tribrach adaptor lug...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This pole is in very good condition. Male 5/8 x 11 thread on one end and female on the other, this prism height adapter allows a GPS pole to be used with a 360 Prism. You can also improve...

AVAILABILITY: This item is usually dispatched same day Telescopic 1.85m aluminium pole with locking button, for GPS GNSS whip antenna. FEATURES: - Strong locking button - 1.85m extension (to bottom of thread) - Male 5/8 thread on the top and female 5/8 thread on the bottom - Includes a carry bag SPE...

AVAILABILITY: This item is usually dispatched same day Replacement pair of Pole mounting clamps for the Trilex MMR Machine Mounted Laser Receiver. FEATURES: - Easy to Install SPECIFICATIONS: - Suits: Trilex MMR and many similar receivers - Fits Pole Diameter: 10-50mm - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day The GME HS010 Headset is tailored for GME handheld UHF radios, providing reliable and clear communication. Its comfortable earpiece fits securely for long-term wear without irritation. Featuring a swivel connector, it offers versatile handling...

Download Free forms to print Download Free page patterns to print AVAILABILITY: This item is usually dispatched same day Want to try out the popular Rite in The Rain 8512 copy paper Now you can with this 10 sheet sample pack. Once you fall in love with this versatile water resistant paper, click he...

AVAILABILITY: This item is usually dispatched same day Replacement metal washer for Bipod feet. Fits the foot of Seco and many other brands of Bipod. FEATURES: - Solid metal - Easy-to-replace SPECIFICATIONS: - Outer Diameter: 64mm - Inner hole: 16mm - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day The Triple Magnet Mount is ideal when attaching GNSS receivers to vehicles or other metal surfaces. Comes with an innovative spring design that allows greater flex, this mounting accessory also works on curved surfaces. FEATURES: - Powerful magn...

AVAILABILITY: This item is usually dispatched in 2 days This rugged Australian designed handheld UHF radio is built with a die-cast chassis and is rated IP67 for water and dust ingress protection. With a powerful 2600mAh lithium ion battery pack and intelligent battery management it can operate for...

AVAILABILITY: This item is usually dispatched same day The Protimeter Moisture Probe and Lead can be used with any of the Pin Type Protimeter Moisture Meters and is designed for the measurement of moisture in awkward corners, or at high and low levels. FEATURES: - Wire length: 812mm (32") - 3.5mm mo...

AVAILABILITY: End of line new stock, only 1 piece available. Usually dispatched same day Aluminium red and white banded prism pole, with a 5/8th thread. Robust twist lock collet system. FEATURES: - Suitable for forest surveying - Built in circular level bubble - Smooth telescopic action - Tough twis...

AVAILABILITY: This item is usually dispatched same day A single crew member can take this durable, rugged sensor and quickly, accurately finish a range of jobs from sub-base levelling to concrete finishing. Works with almost all rotating green beam lasers no matter what brand. This low cost receiver...

AVAILABILITY: This item is usually dispatched same day The Prism Pole Topo Shoe is constructed of high-quality aluminium and fits most prism poles in place of their point. Featuring a wide base foot for added stability. FEATURES: - Features an anodised aluminium body SPECIFICATIONS: - Length: 85.6mm...

AVAILABILITY: This item is usually dispatched same day Replacement target plate to suit the Nedo Tubus 2 green beam pipe lasers. FEATURES: - Tough acrylic SPECIFICATIONS: - Suits: Nedo Tubus 2 green beam laser - Dimensions: 99mm wide, 130mm long, 3mm thick - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day From Myzox Japan, the ALX-55Y2 level staff has a mm scale on the back, from 0 at ground level, making it ideal for use with laser levels to simplify height changes. On the front face the sections alternate each metre between yellow and white to...

Availability: This item is usually dispatched same day Set of four screw-together 12mm diameter rods and point, with 1/4" threads. Suitable for GMP111, GRZ101 and GPR105 reflectors. Provides prism heights of 10, 40, 70, 100 or 130cm. INCLUDES: - 4x 30cm sections - Point - Carry Bag FEATURES: - Screw...

AVAILABILITY: This item is usually dispatched same day The Manhole Cover Lifter Key is a simple way to lift covers, just insert the key, twist and lift. For larger covers with two key holes, you can also use two lifers at once for a vertical lift. FEATURES: - Heavy duty construction - Easy to use SP...

AVAILABILITY: This item is usually dispatched same day The Manhole Cover Lifter Key is a simple way to lift covers, just insert the key, twist and lift. For larger covers with two key holes, you can also use two lifers at once for a vertical lift. FEATURES: - Heavy duty construction - Easy to use SP...

AVAILABILITY: This item is usually dispatched same day The Myzox D-RE2 Laser Receiver is Hybrid, so it works with most red beam AND green beam rotating lasers. The laser receiver is designed to make elevation and vertical alignment control faster and easier for all applications with a digital readou...

AVAILABILITY: This item is usually dispatched same day An incredibly simple, time saving device and a must-have on any construction site. When levelling a site, heavy equipment will need to take off material (cut) or add material (fill). A Cut and Fill Rod tells the user in mm how how much they need...

AVAILABILITY: This item is usually dispatched same day The Prism Pole Topo Shoe is constructed of high-quality aluminium and fits most prism poles in place of their point. FEATURES: - Features an anodised aluminium body SPECIFICATIONS: - Length: 85.6mm - Fitting: 5/8th thread - Weight: 150g

AVAILABILITY: This item is usually dispatched same day Stainless steel adapter, M8 thread to Standard Leica style bayonet. FEATURES: - Stainless steel SPECIFICATIONS: - Lower thread: 8mm male - Construction: Stainless Steel - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day This magnetic prism mount bracket with strong magnets to a rail track or steel beam, for convenient accurate measurements with a total station. Available with either 5/8x11 thread or Leica bayonet fitting, this solid metal bracket comes equipped...

AVAILABILITY: This item is usually dispatched in 1-2 days The Protimeter MMS3 Moisture Measurement System with Wireless Capability is a powerful four-in-one moisture measurement tool with a variety of customisable options. Its intuitive interface and responsiveness allow for quick and simple analysi...

AVAILABILITY: This item is usually dispatched same day The right moisture meter makes all the difference when surveying, cleaning or restoring a property after water damage The Protimeter Aquant (non-invasive) is the sister product to the Surveymaster and helps you locate moisture quickly in a wide...

AVAILABILITY: This item is usually dispatched same day The HS015 is an Earpiece Microphone to suit the GME TX6160 and TX6165 model handheld radios. INCLUDES: - Earpiece Microphone FEATURES: - Earpiece Style Microphone - Foam Cover - In-line PTT with VOX Switch SPECIFICATIONS: - Suits: GME TX6160 snd...

AVAILABILITY: This item is usually dispatched same day This rugged Australian designed handheld UHF radio is built with a die-cast chassis and is rated IP67 for water and dust ingress protection. With a powerful 2600mAh lithium ion battery pack and intelligent battery management it can operate for u...

AVAILABILITY: This item is usually dispatched in 2-3 days GME MC007 universal speaker/microphone for GME transceivers. Extends the speaker, microphone, and transmit controls to a smaller hand piece for greater comfort during sustained use. Compatible with: GME TX665, TX675, TX677, TX685, and TX6155...

AVAILABILITY: This item is usually brought in to order Simply mount this support arm on the side of a standard survey tripod, then attach your antenna to the 5/5th thread. FEATURES: - The heavy-duty bracket makes plumbing the antenna easy - Fits all full-size and heavy-duty tripods and uses a 5/8 x...

AVAILABILITY: This item is usually dispatched same day The Trilex GBR1 Green Beam Laser Receiver is designed to make elevation and vertical alignment control faster and easier for all applications with a digital readout of millimetres to grade. The GBR1 is a precise sensor that can meet the demands...

AVAILABILITY : This item is usually dispatched same day The Leica DISTO D5 is particularly suitable for distance measurements in outdoor areas. Due to the digital Pointfinder, aiming is no problem even in sunshine and at very long distances. Both the target and the measurement results can be seen ve...

Download Brochure Download User Manual Download Wood Comparison Chart AVAILABILITY: This item is usually dispatched same day The world's original and best-selling dual-function moisture meter with both pin and non-invasive measurement capabilities. The right moisture meter makes all the difference...

AVAILABILITY: This item is usually despatched same day The Leica DISTO X6 is especially suitable for rough construction sites. With an IP65 rating, the extremely robust housing protects against dust and water jets and is drop tested from a height of 2 m, underlining the reliability and durability of...

AVAILABILITY: This item is usually dispatched in 2-3 days The MC010 is an IP67 rugged waterproof and dustproof speaker microphone with a PTT Button and improved gain sensitivity. The MC011 suits the GME TX6160, TX6165 and TX6100 handheld radios. INCLUDES: - Speaker Microphone FEATURES: - Waterproof...

AVAILABILITY: This item is usually dispatched same day A simple yet effective way to ensure that the cone on your Magmo Scala Penetrometer is not worn and outside the specifications to meet NZS 4402 and the CETANZ TG1 technical guidelines. Sometimes referred to as a "Go/No-Go Cone Tip Checker", the...

AVAILABILITY: This item is usually dispatched same day Designed for 3D and Dot/Line laser levels, the a perfect accessory to help get your beam over a point and aligned with a point. Simply put your laser level on the 1/4 "steel thread and you can use two knobs to position it in both X and Y axis ov...

AVAILABILITY: This item is usually despatched same day Perfect for topographic surveys and especially useful in hilly areas, this prism can clamp on to a level staff to help you get to hard to measure to places because of angles or obstacles FEATURES: - Silting for better viewing angle - Sliding cla...

AVAILABILITY: This item is usually dispatched same day For particularly heavy equipment, the Seco Tri-Max dual-clamp tripod gives added security, with both wingnut and quick clamps on the one tripod.Stable, with kick out prevention system, the Tri-Max extends to 180cm and folds to 113cm. The shape a...

AVAILABILITY: This item is usually dispatched same day Magnetic mount assembly available on it's own to to fit to your existing L-Bar Monitoring Prisms or supplied with an L-Bar prism. This is an upgrade option for one of the most reputable and reliable prisms used for monitoring today, the ADS114 u...

AVAILABILITY: This item is usually dispatched same day. Replacement part for the Magmo Collapsable Scala Penetrometer Extractor. FEATURES: - Steel - Zinc Plated SPECIFICATIONS: - Suits: Magmo Extractor and similar models - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day. Replacement part for the Magmo Collapsable Scala Penetrometer Extractor. FEATURES: - Steel - Zinc Plated SPECIFICATIONS: - Suits: Magmo Extractor and similar models - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day Replacement holder clamp for the Spot-On Powerline D9 and D9H Laser level receiver. FEATURES: - Simple to use - Rugged design SPECIFICATIONS: - Suits: Spot-On Powerline D9 and D9H Laser level receiver

AVAILABILITY: This item is usually dispatched same day 12V USB vehicle charger to suit the GME TX665, TX667, TX675 and TX677 radios. FEATURES: - Suits vehicle 12v cigarette lighter SPECIFICATIONS: - Socket: USB Type A female - Suits: GME TX665, TX667, TX675 and TX677 radios

AVAILABILITY: This item is usually dispatched same day Pack of 20 discs (single colour per pack) in: Red, Blue, White or Yellow. Bright coloured markers for maximum visibility in roading and survey set-out. Made from tough, high impact, weather resistant HDPE plastic, 7mm thick and 47mm diameter wit...

AVAILABILITY: This item is usually dispatched same day The Protimeter Mini is a compact, general purpose moisture meter used by building professionals and trades across the globe to check the moisture level of wood and building materials for a vast range of quality control and moisture diagnosis app...

AVAILABILITY: This item is usually dispatched same day The Protimeter Mini is a compact, general purpose moisture meter used by building professionals and trades across the globe to check the moisture level of wood and building materials for a vast range of quality control and moisture diagnosis app...

AVAILABILITY: This item is usually dispatched same day Simply mount this support arm on the top of a standard survey tripod, then insert a pole or mast into the sleeve, clamping it in place. This support allows you to position the pole at the desired height above the ground. Alternatively, use to pl...

AVAILABILITY: This item is usually dispatched same day Maximum stability in minimal space. This simple setup allows you to level a prism in a compact or inaccessible location easily for backsights and monitoring., leaving your hands free for recording. With a standard 5/8 x 11 survey thread, you can...

Download Brochure AVAILABILITY: This item is usually dispatched same day. Equipped with an advanced 800 channels GNSS board and capable of supporting multiple satellite constellations, including GPS, GLONASS, BEIDOU, GALILEO, QZSS and IRNSS. Stonex S850A GNSS receiver is an ideal solution for any s...

Download Brochure AVAILABILITY : This item is usually dispatched same day. Stonex S900A is equipped with an high performance GNSS board 800 channels and capable of supporting multiple satellite constellations: GPS, GLONASS, BEIDOU, GALILEO, QZSS and IRNSS, including L-Band correction. Available wit...

AVAILABILITY: This item is usually dispatched same day Maximum stability in minimal space. This simple setup allows you to level a prism in a compact or inaccessible location easily for back sights and monitoring., leaving your hands free for recording. With a standard 5/8 x 11 thread, you can put a...

AVAILABILITY: This item is usually dispatched same day The S80 is an Android Rugged Tablet that is accurate, resistant, and well-equipped, making it ideal for professionals who need a handy and lightweight device. The device is enriched with numerous features that make it excellent for carrying out...

AVAILABILITY: This item is usually dispatched same day The Triple Magnet Mount is ideal when attaching GNSS receivers to vehicles or other metal surfaces. Comes with an innovative spring design that allows greater flex, this mounting accessory also works on curved surfaces. FEATURES: - Powerful magn...

AVAILABILITY: This item is usually brought in to order The OM5 Parallel Plate Optical Micrometer is an optional accessory that mounts to the either the Sokkia B20 or the Topcon AT-B2 automatic level, for increased precision (Auto level not included). Perfect for high precision levelling tasks. The O...

AVAILABILITY: This item is usually dispatched same day The HS009 is an Earpiece Microphone to suit the GME TX665, TX667, TX675, TX677, TX685, TX6150 and TX6155 model handheld radios. INCLUDES: - Earpiece Microphone FEATURES: - Earpiece Style Microphone - Foam Cover - In-line PTT with VOX Switch SPEC...

AVAILABILITY: This item is usually dispatched same day This is designed to provide your tripod stability when used indoors on concrete and other slick surfaces. Just unfold the three legs, stand the tripod with its points positioned in the holes in the floor guide and the tripod is secure and the le...

AVAILABILITY: This item is usually dispatched same day Individual flexible prism reflectors made from a high grade conspicuity material. Ideal for dam surveys, monitoring or any situation where multiple measurements to the same point make using a regular prism too expensive or time consuming. FEATUR...

AVAILABILITY: This item is usually dispatched same day Make installing track, lighting and ceilings easier and more accurate. This wall mount for the Nedo Sirius series laser levels, to attach the laser directly to the wall. If the floors are too good to damage with tripod feet, or if the work site...

AVAILABILITY: This item is usually dispatched same day Replacement Rechargeable Battery Pack for the Nedo Primus series lasers. FEATURES: - Charge using Nedo battery charger (sold separately) SPECIFICATIONS: - Suits: Nedo Primus series rotating lasers - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day Machined from a single piece of alloy, this adaptor fits over a standard male 5/8 x 11 thread from both ends. FEATURES: - Tough single piece alloy SPECIFICATIONS: - Construction: Alloy - Length: 38mm - Thread: Female 5/8 x 11 to Female 5/8 x 11...

AVAILABILITY: This item is usually dispatched same day. The Magmo Collapsable Scala Penetrometer Extractor makes removing rods from the ground incredibly easy. Not only does a lever extractor help prevent broken and bent rods caused by pulling them out of the ground by hand, but this new extractor d...

Download Brochure AVAILABILITY: This item is usually dispatched same day. Stonex S900 is equipped with a high-performance GNSS board with 1408 channels and can support multiple satellite constellations: GPS, GLONASS, BEIDOU, GALILEO and QZSS. Through the 4G GSM modem, a fast Internet connection is...

AVAILABILITY: This item is usually dispatched same day 316 stainless steel Benchmark Pin with a shoulder, to anchor into concrete or soil, to create a stable reliable geodetic survey control point. The top features a fine divot for precise measurements, with a conical tapered head. FEATURES: - 316 S...

AVAILABILITY: This item is usually dispatched same day Easydig is a wireless excavator guidance system that leads the industry with centimetre accuracy and can be installed in 30 minutes - by anyone The excavator guidance system comes with a modular design that allows you to switch between machines...

AVAILABILITY: This item is usually dispatched same day Individual flexible prism reflectors made from a high grade conspicuity material. Ideal for dam surveys, monitoring or any situation where multiple measurements to the same point make using a regular prism too expensive or time consuming. FEATUR...

AVAILABILITY: This item is usually dispatched same day Replacement 50mm steel mini prism point for Leica GMP111 Mini Prism Set and GLS115 Mini Detail Pole. FEATURES: - Genuine Leica Part - Sharp Point SPECIFICATIONS: - Suits: GMP111 Mini Prism and GLS115 Mini Detail Pole - Length: 50mm (excludes thr...

AVAILABILITY: This item is usually dispatched same day A "better than original" replacement for the cable that comes with Clegg, Geo-Impact or Controls brand impact testers. Using the highest quality cable, connectors and design for superior signal and strength. The Magmo BNC to BNC (British Navel C...

AVAILABILITY: This item is usually dispatched same day Traverse / Back-sight prism kit contains case, traverse prism, tribrach carrier adapter with level and tribrach with no optical plummet. The tribrach carrier has a lever arm with bottom of notch measurement that enables accurate height measureme...

AVAILABILITY: This item is usually dispatched same day Top of the line. Topcon prisms are ideal in any standard reflector holder. This model includes a copper coating on the back of the prism glass. This provides an additional layer of durability and protection from dust and moisture that can cause...

AVAILABILITY: This item is usually dispatched same day Topcon/Sokkia CDC77 Battery Charger, charges the DBC71 and BDC72 Li-Ion batteries. Input: AC100-240V 50-60Hz Output: DC8.28V 1.2Ax2 FEATURES: - For DBC71 and BDC72 Li-Ion batteries (TP-L6) SPECIFICATIONS: - Input: AC100-240V 50-60Hz - Output: DC...

AVAILABILITY: This item is usually dispatched same day The Topcon/Sokkia BDC72 grey Li-Ion Battery for Topcon and Sokkia total stations and lasers. This grey high capacity battery also replaces the older BDC70 black battery which has gone out of production. Please Note: this battery is NOT compatibl...

AVAILABILITY : This item is brought in to order The Rail Track Weld Inspection Gauge is a 1m Straight Edge, used for checking rail tracks for deflection before and after welding. Available either with or without a notch over the track join. INCLUDES: - Straight Edge - Wooden Carry Box FEATURES: - Ma...

AVAILABILITY: This item is brought in to order The Platform Gauge is used for measuring the distance between the railway track centre and the platform side and the height between the rail surface and platform plane. This product is customisable to suit individual measurement requirements. INCLUDES:...

AVAILABILITY: This item is usually dispatched same day Small and handy aluminium elevator tripod. 5/8th thread to suit line and dot laser levels. FEATURES: - 5/8 Inch Thread to suit all standard lasers and levels - Elevator top for exact height setting - Anti-tip stabiliser bar SPECIFICATIONS: - Thr...

AVAILABILITY: This item is usually dispatched same day Anodised aluminium plate with two ways to mount. Countersunk screw mounting holes in the top and threaded holes for anchor studs in the bottom (not included). Designed for column mounting installation, to create stable monument monitoring positi...

Download Brochure AVAILABILITY: This item is usually dispatched same day With the addition of a 633nm red beam laser pointer for guidance up to 50m away in daylight, the Topcon DT-305L integrates the same high-quality advanced absolute circle reading technology found in Topcon's high-performance to...

Download Brochure AVAILABILITY: This item is usually dispatched same day. The R180 from Stonex Italy is a highly accurate and fast Android robotic station. It features a rotation speed of 180/sec and an EDM accuracy of 1 mm 1 ppm, with a range of up to 1000 m without a prism. The R180 is available...

Download Brochure AVAILABILITY: This item is usually dispatched same day. The R60 total station from Stonex has a 5.5-inch touch screen with Android operating system, which provides users with a smartphone-like experience in terms of ease of use and familiarity. With the Android OS, operators can e...

AVAILABILITY: This item is brought in to order. Usually dispatched in 1-3 weeks 5m 5 section aluminium staff for use with Sokkia/Topcon digital levels, such as the SDL50. The Sokkia BAS55 5-Meter Aluminum Barcode Grade Rod works with their digital auto level, when taking digital elevation measuremen...

AVAILABILITY: This item is brought in to order. Usually dispatched in 1-3 weeks Sokkia brings the benefits of digital levelling to construction applications at an affordable price with the reliable, easy-to-use SDL50 Digital Level. In less than 3 seconds and with the touch of a key, height differenc...

Download Brochure AVAILABILITY: This item is usually dispatched same day Topcon's DT-309 theodolite integrates the same high-quality advanced absolute circle reading technology found in Topcon's high-performance total station products for more accurate field calculations. They continue to deliver t...

AVAILABILITY: This item is usually dispatched same day Keep your hands free when marking with a measure wheel with this handy paint can holder. Simply clamp the holder around the handle of the wheel, set the desired angle and pop in a can of paint. FEATURES: - Fits most brands of marking paint cans...

Download Brochure AVAILABILITY: This item is usually dispatched in 2-3 days The Topcon LS-B200 Machine Control Laser Receiver is a reliable, full sized detector, used by construction professionals to measure ground level and sloped terrains. It can be used on dozers, excavators, backhoes, drag-boxe...

AVAILABILITY: This item is usually dispatched same day From Nedo, Germany, the Primus 2 H1N Horizontal, Self-Levelling, Single Grade Rotary Laser is a multi-purpose instrument that is ideal for grading, excavating, site preparation, concrete works, and other general construction projects. With a las...

AVAILABILITY: This item is usually dispatched same day Machined from a single piece of alloy, this adaptor fits over a standard male 5/8 x 11 thread, converting it to a 14 x 20 male thread. FEATURES: - Tough single piece alloy SPECIFICATIONS: - Construction: Alloy

AVAILABILITY: This item is usually dispatched same day The perfect paper for those involved in the collection of data out-of-doors. The Rite In The Rain field books allow you to work efficiently in any weather. FEATURES: - Left Page Lines 6 Columns - Right Page 2 X 2mm grid - Contents Page - Ruler p...

AVAILABILITY: This item is usually dispatched same day From Stonex Italy, this Genuine original antenna features a fixed locking ring, so now you don't have to struggle with the locking ring on your twist-lock TNC antenna Our antenna's have a fixed TNC connector, so you can simple turn the entire an...

AVAILABILITY: This item is usually dispatched same day It is important to keep your prism pole plumb when levelling, as a small error will magnify as the pole is extended. These levels have a solid aluminium body, with an adjustable bubble. They have a locking knob on the side to allow them to slide...

AVAILABILITY : This item is usually dispatched same day The SPOT Locator by Schonstedt, detects the magnetic field of iron and steel objects (ferrous), providing an audio detection signal that peaks in frequency when the locators tip is held directly over the target. Designed for one-handed operatio...

AVAILABILITY: This item is usually dispatched same day A replacement mm receiver and radio remote in one, for the Nedo Primus HVA2N Dual Grade Laser. FEATURES: - Gives distance in mm to level - Level bubble - Flush mounted clamp design - Bright LED indicators - Rugged clamp design - Auto shut-off -...

AVAILABILITY: This item is usually dispatched same day Don't get caught out with a flat battery. With this battery box, just pop in 4 x 1.5V alkaline batteries and insert this pack in your PRIMUS2 laser, in place of the rechargeable pack. Batteries not included FEATURES: - Quick and easy to use SPEC...

Availability: This item is usually dispatched same day Turns the Leica/Wild bayonet fitting into a standard 5/8th survey thread. This model features a quick release button to allow the adaptor to be removed from the Leica bayonet fitting in a snap FEATURES: - Rugged construction SPECIFICATIONS: - Co...

AVAILABILITY: This item is usually dispatched same day Genuine replacement Nedo Primus series rotating laser charger. FEATURES: - High quality plug-in wall charger SPECIFICATIONS: - Suits: Nedo Primus series rotating lasers - Input: 110-240V~, 50-60Hz - Output: 6.6V DC, 1.7A - Wall plug: NZ/Australi...

AVAILABILITY: This item is usually dispatched same day When viewing a green laser through a green filter, all other colours on the visible light spectrum are cut down and the green is enhanced. These green lens glasses improve visibility of green laser beams under bright conditions or over distances...

AVAILABILITY: This item is usually dispatched same day This adjustable offset bar can be used with total stations and prism poles to help get accurate elevation measurements in hard-to-reach places. Using any standard survey pole, just remove the pole's point and screw on the end of this bar. Ideal...

AVAILABILITY: This item is usually dispatched same day A single crew member can take this durable, rugged sensor and quickly, accurately finish a range of jobs from sub-base levelling to concrete finishing. Works with almost all rotating red beam lasers no matter what brand. This low cost receiver i...

AVAILABILITY: This item is usually dispatched same day The Seco Sliding Prism and Sectional Pole Kit consist of a prism and pole system that effectively tilts and slides up and down pin poles. The 25mm silver-coated prism has a zero offset and features a high-quality aluminium holder. In addition, t...

AVAILABILITY: This item is usually dispatched same day The RL-HV2S is Topcon's newest dual grade construction laser. Replacing the RL-SV2S model, the RL-HV2S is a dual grade, long range, self-levelling instrument built to perform This laser is a great tool for any general construction or engineering...

AVAILABILITY: This item is usually dispatched same day The Nedo Laser Target will enhance the brightness of any visible red beam laser level and is ideal for use with the Nedo X-LINER 3D or other green beam line and dot lasers. Fold out the stand to keep it upright when using it on the floor or benc...

AVAILABILITY: This item is usually dispatched same day Dont flag your position with a standard white paper notebook. Instead, protect yourself and your notes by using the "Rite in the Rain" Tactical Notebooks. These spiral bound notebooks have 100 Universal pages (50 sheets) in green. With the Unive...

AVAILABILITY: This item is usually dispatched same day Replacement Protimeter Reachmaster Pro Abrasion Plate Kit with Screws for the Protimeter Reachmaster Pro.

Download: How To Go Geocaching AVAILABILITY: This item is usually dispatched same day Find your way in this big, wide world with GPSMAP 65s. This rugged handheld offers multi-band technology and expanded GNSS support for optimal accuracy in steep country, urban canyons and forests with dense trees...

AVAILABILITY: This item is usually dispatched same day The BD-74 Alkaline Battery Holder for Topcon RL-H4C and RL-SV2S Laser is a good replacement accessory that can hold four D-cell alkaline batteries to power the Topcon RL-H4C rotary laser and RL-SV2S grade laser. This battery holder is made of du...

AVAILABILITY: This item is usually dispatched same day Yamayo tapes are manufactured to withstand rugged use and resist tear, year after year, even in extreme weather conditions and temperatures. Strength is assured through an inner core of extremely tough fibreglass with a protective PVC overlay. B...

AVAILABILITY: This item is usually dispatched same day From Nedo Germany comes the Sirius 1 HV, a fully automatic rotating laser for horizontal and vertical applications, built tough for the professional tradesperson. Ideal for all levelling and aligning, in interior outfitting and exterior construc...

AVAILABILITY: This item is usually dispatched same day Works with almost all red beam rotating laser levels. A single crew member can take this easy to use receiver accurately finish a range of jobs from sub-base levelling to concrete finishing. Works with almost all rotating red beam lasers no matt...

AVAILABILITY: This item is usually dispatched same day Nedo Germany brings you the self-levelling 5-beam point dot laser which transmits three horizontal and two vertical laser points: to the front, left, right, up and down. The laser dots are arranged in an exact right angle to one another. The hor...

AVAILABILITY: This item is usually dispatched same day The Nedo Acceptor X green beam line laser receiver allows user to receive the line, even in bright sunlight and at a longer distance from the laser, with precision. It works with green-beam line lasers between 510-540 nm with pulse mode. When us...

AVAILABILITY: This item is usually dispatched same day The Magmo 1220mm (48 Inch) Heavy Duty Stake Bag is the surveyor's companion. With loads of room for pegs, stakes, pin-finder, and other accessories, along with three large pockets for nails, tools and other items a surveyor needs to keep handy...

AVAILABILITY: This item is usually dispatched same day Nedo Germany has set a new standard in laser detectors with the Acceptor Maxx. SuperCell technology improves every aspect of the way you pick-up your laser and check your elevations. Accuracy, toughness, and reception height have all been redefi...

AVAILABILITY: This item is usually dispatched same day The perfect paper for those involved in the collection of data out-of-doors. Rite In The Rain" field books allow you to work efficiently in any weather. The 28 x 21.6 cm Universal Side Spiral Notebook is made with a durable Polydura cover, wire-...

AVAILABILITY: This item is usually dispatched same day From Nedo, Germany comes the Primus 2 H Horizontal, Self-Levelling, rotary laser level. A multi-purpose instrument that is ideal for levelling, machine control and other general construction projects. With the Nedo Acceptor Maxx, industry leadin...

AVAILABILITY: This item is usually dispatched same day SECO aluminium open clamps feature a quick release button and a brass clamp screw that attaches to the pole. This model suits 38mm outside diameter poles and rods (1.5"). Manufactured from black anodised aluminium and stainless steel quick relea...

AVAILABILITY: This item is usually dispatched same day From Nedo, Germany, the Primus 2 HVA2N Horizontal and Vertical, Self-Levelling, Dual Grade Rotary Laser is a multi-purpose instrument that is ideal for grading, excavating, site preparation, concrete works, and other general construction project...

AVAILABILITY: This item is usually dispatched same day Carry case to suit MT610G EPIRB PLB INCLUDES: - Premium Carry Case - Metal Carabiner FEATURES: - Premium Semi-Hard Carry Case - High Visibility Yellow Finish - Over-Sized Plastic Zipper - UV Resistant Material - Includes Metal Carabiner SPECIFIC...

AVAILABILITY: This item is usually dispatched same day GMEs AccuSat MT610G is the latest design, ultra compact pocket size EPIRB. Leading the world with feature innovation and user benefits. Not only is the AccuSat MT610G one of the smallest and lightest PLB's on the market, it also has a massive 7...

AVAILABILITY: This item is usually dispatched same day This mini reflector provides the best pointing accuracy of 1.5mm because of its compact size. The Leica Style GRZ101 360 mini prism is ideal for short range applications, providing up to 350m measurements. Copper coated prisms for clarity and an...

AVAILABILITY: This item is usually dispatched same day Nedo Germany brings you this powerful bright green beam multiline laser level, featuring three 360 lines: one horizontal line and two vertical. The Nedo X-LINER 3D features an out of level alert to warn the operator if it is outside of its level...

AVAILABILITY: This item is usually dispatched same day Rugged by nature, the UT12P is a compact Android tablet, its efficiency and performances make it suitable for working in difficult conditions. It has been designed to be handy and pocket-sized with a very visible screen, with which you can easil...

AVAILABILITY: This item is usually dispatched same day No more bending down to mark the ground. This handy applicator wand with removable wheel lets you apply paint at the squeeze of the trigger. Fits Aervoe brand upside down cans. The Aervoe Marking Stick is designed to allow precise marking in lar...

AVAILABILITY: White is usually dispatched same day, other colours usually dispatched in 2-3 days Carton of 12 patented, water-based formula cans of marking paint, for marking on any surface. Aervoe Water Based Marking Paint is a highly-pigmented, durable water-based paint designed to mark and adhere...

AVAILABILITY: This item is usually dispatched same day Carton of 12 extra large size 482g cans of marking paint. Use inverted to get better control when marking the ground. Does not paint your finger like some nozzles can. Made in the USA and CFC free. If you wish to mix and match the 12 colours in...

AVAILABILITY: This item is usually dispatched same day From Nedo Germany comes the Sirius 1 HV, a fully automatic rotating laser for horizontal and vertical applications, built tough for the professional tradesperson. Ideal for all levelling and aligning, in interior outfitting and exterior construc...

Download Brochure AVAILABILITY: This item is usually dispatched same day. Made in Germany, the Nedo TUBUS 2 features compact design which enables it to be used in narrow pipes with diameters of only 125mm. Insertion into small-diameter pipes is simplified by the innovative pipe slider, a rugged met...

AVAILABILITY: This item is usually dispatched same day Developed to meet the needs of Auto-tracking Robotic Total Stations, the six precision-ground corner cubes are mounted in a rugged housing wth no horizontal offset between prisms and a -7mm prism constant. Designed with both a Female 5/8 x 11 mo...

AVAILABILITY: This item is usually brought in to order The Nedo LaserWinkeltronic combines the advantages of the latest laser technology with the proven technology of the Nedo Winkeltronic. Many applications, such as measuring and adjusting angles when installing staircases, interior outfitting, mod...

AVAILABILITY: This item is usually dispatched same day Made in Germany, the Nedo Winkeltronic angle measure is a proven electronic angle measuring tool. With an accuracy of 0.1 degree, use this Nedo digital angle measuring tool to measure and transfer angles. With handy dimensions, light weight cons...

AVAILABILITY: This item is usually dispatched same day The digital angle measuring device to precisely measure and transfer angles rugged, reliable and with an accuracy of 0.1. The measured angles are read off conveniently from the large display. Very easy handling thanks to the symmetrical arrangem...

AVAILABILITY: This item is usually dispatched same day The Trilex EP-01 quickly fits to the eyepiece of the Trilex DT-02 LDT-202B theodolite, to as an essential accessory that allows accurate measuring in steep areas. This diagonal eyepiece, with its durable metal construction, it can withstand hars...

AVAILABILITY: This item is usually dispatched same day Genuine factory replacement Li-ion 3400mAh 7.2V Leica Battery with built in push button power indicator level lights. FEATURES: - High capacity 3400mAh Li-ion - Built in voltage level indicator SPECIFICATIONS: - Type: Li-ion - Capacity: 3400mAh...

Download Brochure AVAILABILITY: This item is usually dispatched same day. The Stonex R20 combines and reliability. Optimal measurement performance up to 5000 m with a prism, 600 m reflectorless and with a 2" angular accuracy. The high performance telescope, with illuminated reticle, provides the be...

AVAILABILITY: This item is usually dispatched same day. The new Stonex SR02 is a 2W UHF radio which boasts a newly designed precision transceiver radio board, representing the state-of-the-art in flexibility, whilst providing a compact and powerful solution for a multitude of long-range applications...

AVAILABILITY: This item is usually dispatched same day Top quality Yamayo Stilon Measure tapes are rust-proof, even against saltwater. Durable and reliable, practically unbreakable. Metal hook end. FEATURES: - 100m - Manual retracting - ABS case - Nylon coated blade for maximum durability - Rustproo...

AVAILABILITY: This item is usually dispatched same day The Manhole Cover Lifter makes the job of lifting the cover off a manhole or pit much easier. Simply place the lifting eye in the lid slot, lever down on the lifting bar and lift the lid up, saving your back from excess stress. Folding design al...

AVAILABILITY: This item is usually dispatched same day Topcon replacement battery charger. The AD-17 Battery Charger, recharges the NiMH batteries of any compatible laser level. This model replaces the AD-15 and AD-15E chargers. FEATURES: - Plug-in wall charger SPECIFICATIONS: - Suits: RL-H4C / RL-H...

AVAILABILITY: This item is usually dispatched same day A versatile laser receiver thats easy to use, easy to install and easy on your budget. The Trilex MMR Machine Mounted Laser receiver is designed to adapt to any earthmoving machine, so you need only one receiver for any job. Whether mounted on a...

AVAILABILITY: This item is usually dispatched same day Male 5/8 X 11 thread on one end and female on the other, this prism height adapter allows a GPS pole to be used with a 360 Prism. You can also improve your GNSS signal and reduce interference by using this adapter as a spacer under a GPS to boos...

AVAILABILITY: This item is usually dispatched same day Genuine replacement parts for the Rotosure brand of measure wheels. There are many variations of the counter used over the years, so please ensure you order the correct version for your model, as the use of an incorrect counter can damage the me...

AVAILABILITY: This item is usually dispatched same day The Myzox REVO360 prism pole adapter for use with Leica style bayonet spigot prism poles FEATURES: - Leica style bayonet spigot on the bottom and 6mm female thread on the top - Compatible with REVO360 R-360 prism SPECIFICATIONS: - Suits: REVO360...

AVAILABILITY: This item is usually dispatched same day The Myzox REVO360 prism pole adapter for use with 5/8th prism poles FEATURES: - 5/8th Female thread on the bottom and 6mm female thread on the top - Compatible with REVO360 R-360 prism SPECIFICATIONS: - Suits: REVO360 R-360 prism - Size: 25mm di...

AVAILABILITY: This item is usually brought in to order The Myzox REVO360 is a 360 degree mini prism with a difference Most 360 degree prisms are glued together, so if you break one face, the whole thing needs to be replace - well not with REVO360 Each prism face on the REVO360 can be replaced indivi...

AVAILABILITY: This item is usually dispatched same day For use with: Wood, Drywall, Building Material, Concrete, Fibreglass Boat Hulls The Protimeter BLD5777 ReachMaster Pro is a non-invasive moisture meter that enables the rapid assessment of moisture conditions in buildings. No more climbing ladde...

AVAILABILITY: This item is usually dispatched same day The Triple Magnet Mount for the Trimble R10 is an extra-tall magnet mount ideal when attaching GNSS receivers with downward antennas, like the Trimble R10, to vehicles or other metal surfaces. Comes with an innovative spring design that allows g...

AVAILABILITY: This item is usually dispatched same day Now you don't have to struggle with the silver locking ring on your twist-lock TNC antenna Our antenna's have a fixed TNC connector, so you can simple turn the entire antenna to lock it in place, even if the mount is in a recess where it's hard...

AVAILABILITY: This item is usually dispatched same day An invaluable tool for any surveyor This telescopic mini prism allows to to easily measure to high areas, in narrow spaces or through fences. to measure in to inaccessible places with ease. Zero prism constant on a tilting head, simply telescope...

AVAILABILITY: This item is usually dispatched same day With outstanding quality you expect from Myzox, this is a stable bipod with push button release legs. Perfect when levelling or using a digital level to keep your staff stable whilst reading. Suitable for level staves, between 60 100mm wide. FEA...

AVAILABILITY: This item is usually dispatched same day A telescopic carbon fibre pole, light-weight but tough. The robust locking system and corrosion resistant shoe make for an excellent all round pole. FEATURES: - Telescopic to 2.45 metres - Tough screw lock mechanism - Built in bubble - Printed G...

Download Brochure AVAILABILITY: This item is usually dispatched same day. The Stonex S70G is a 4-constellation dual frequency GNSS system (GPS, GLONASS, Galileo and BeiDou) that allows you to collect data and photos in the field, quickly and easily. Supplied with an antenna connected directly to th...

AVAILABILITY: This item is usually dispatched same day Male 5/8 x 11 thread on one end and female on the other, this pole can be used as a prism height adapter, GNSS Antenna height adapter or a robotic pole adapter with a 360 Prism. Improve your GNSS signal and reduce interference by using this adap...

AVAILABILITY: This item is usually dispatched same day Compact, rugged and easy to use. Just aim the bright red laser pointer dot on the surface you wish to measure and pull the trigger. The thermometer gun reads the surface temperature in less than one second. Contactless, quick and accurate. Perfe...

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This receiver is average condition. AVAILABILITY: This item is usually dispatched same day Used Laser Alignment Rod-Eye receiver. INCLUDES: - Rod-Eye receiver - 9v Alkaline battery

AVAILABILITY: This item is brought in to order Adhesive reflectors don't reliably stick to oil, grease and rust. In settings like boat building and bridge monitoring, these strong magnetic reflectors can be positioned on any steel surface, regardless of the finish. The reflective surface rotates a f...

Download Brochure AVAILABILITY: This item is usually dispatched in 2-5 days GradeMetrix is Hemisphere GNSS high-value machine guidance solution for high-precision GNSS-based machine control and guidance applications and systems. Hemispheres GradeMetrix portfolio includes solution offerings for doze...

Download Brochure AVAILABILITY: This item is usually dispatched in 2-5 days GradeMetrix is Hemisphere GNSS high-value machine guidance solution for high-precision GNSS-based machine control and guidance applications and systems. Hemispheres GradeMetrix portfolio includes solution offerings for doze...

AVAILABILITY: This item is usually dispatched same day This handy tool from Magmo is a calibrated gauge, perfect for providing a preliminary assessment of crack widths in concrete walls foundations, even for those cracks that are large and awkward to reach. This convenient pocket size card allows fo...

Download Brochure AVAILABILITY: This item is usually dispatched same day Watch the video below and you'll see why Stonex Italy is proud to call this a genuine Ruggedised Tablet SRT10W is the new 10.1 inch Stonex tablet with Windows 10 IoT Enterprise operating system. Thanks to its robust ruggedised...

AVAILABILITY: This item is usually dispatched same day Two 30 x 30mm retro reflectors mounted at a 45 degree angle. Suitable for short-range monitoring of difficult locations, for example: bridge, tunnel and rail construction. Screw and plug or adhesive fixing FEATURES: - Used for the monitoring of...

Download Brochure AVAILABILITY : This item is usually dispatched within 1-2 days. Stonex technology for GNSS reference stations and networks continues to evolve, meeting rapidly changing GNSS technology demands. Stonex C.O.R.S. stations (Continuously Operating Reference Station) are flexible and ad...

AVAILABILITY: This item is usually dispatched same day Genuine factory replacement Li-ion 4400mAh 7.4V Leica Battery. FEATURES: - High capacity 4400mAh Li-ion SPECIFICATIONS: - Also known as: GEOMAX ZBA200, ZBA400 or LEICA 724117, 733269, 733270, 772806, GBE211, GBE221, GEB211, GEB212, GEB90 - Type:...

AVAILABILITY: This item is usually dispatched same day In the survey and construction industry, it's common for valuable instruments to be blown or knocked over, when these simple life-saving sand bags could have helped prevent thousands of dollars of loss. A simple and effective concept, just set u...

AVAILABILITY: This item is usually dispatched same day Replacement Li-ion 3400mAh Horizon Kronos C3 Battery, also replaces Trimble 54344 battery. FEATURES: - High capacity 3400mAh Li-ion SPECIFICATIONS: - Type: Li-ion - Capacity: 3400mAh - Voltage: 7.4V - Suits: Horizon Kronos C3. CHCNAV XB-2, Trimb...

To request a demo or discuss the best software options for you and your team, call us today With an Atlas subscription on a compatible Stonex GNSS receiver, if you lose RTK fix, for 20 minutes Atlas will take over, giving RTK precision until you regain your RTK fix. If you need to work past 20 minut...

AVAILABILITY: This item is usually dispatched same day Photodegradable white thread (breaks down with sun exposure) on tapered cone to fit the HipChain 2 model. 5000m per roll. Used in HipChain 2.0. FEATURES: - Photodegradable - Plastic Core SPECIFICATIONS: - Thread: Photodegradable Polyester - Leng...

AVAILABILITY : This item is usually dispatched same day The HipChain 2 is a time tested instrument for precise distance measurement. Simply tie the cotton thread to a fixed object at your starting point, zero-set your counter and begin walking. The thread pulls out as you walk turning the counter. T...

AVAILABILITY: This item is usually dispatched same day Topcon replacement battery charger. Replaces AD-13, AC-7 or AD-1 Chargers. FEATURES: - High quality plug-in wall charger SPECIFICATIONS: - Suits Models: - Topcon: BT-51Q, BT-45Q, BT-49Q, RL-H2SA, RL-VH3, RT-5SA, RL-H3a, RL-1002S, RL-1001S, TP-L3...

AVAILABILITY: This item is usually dispatched same day Replacement battery charger. Replaces Topcon AD-13, AD-11, AC-7C or AD-1 Chargers. FEATURES: - High quality plug-in wall charger SPECIFICATIONS: - Suits Models: - Topcon: BT-51Q, BT-45Q, BT-49Q, RL-H2SA, RL-VH3, RT-5SA, RL-H3a, RL-1002S, RL-1001...

Download Brochure AVAILABILITY : This item is usually dispatched same day Mobile data collection with more power, faster performance in the harshest conditions The Carlson RT4 is designed for surveying, stake out, construction layout and GIS mapping and is bundled with Carlson SurvPC the Windows-ba...

To request a demo or discuss the best software options for you and your team, call us today Cube-a is the Stonex surveying and mapping software designed and developed for Android platform. Thanks to the flexibility of the Android environment, we have been able to create a simple and intuitive user i...

Download Brochure Download User Manual AVAILABILITY: This item is usually dispatched same day. The TP-L6 pipe lasers smaller size, long-life battery and mobile app make the unit one of the most flexible pipe lasers on the market. This pipe laser is easier to use, fits into tighter spaces, and incre...

Download Brochure Download User Manual AVAILABILITY: This item is usually dispatched same day. The TP-L6 pipe lasers smaller size, long-life battery and mobile app make the unit one of the most flexible pipe lasers on the market. This pipe laser is easier to use, fits into tighter spaces, and incre...

Download Brochure AVAILABILITY: This item is usually dispatched same day. Equipped with an advanced 800 channels GNSS board and capable of supporting multiple satellite constellations, including GPS, GLONASS, BEIDOU, GALILEO, QZSS and IRNSS. Stonex S850 GNSS receiver is an ideal solution for any su...

AVAILABILITY: This item is usually dispatched same day Replacement Remote Control for Topcon's RL-SV2S series lasers.

AVAILABILITY: This item is usually brought in to order Replacement Remote Control for Topcon's TP-L3, TP-L4 and TP-L5 series pipe lasers.

AVAILABILITY: This item is usually dispatched same day Designed to protect your prism or range pole from dirt and moisture. The bag has a fold-over flap and is made from Cordura nylon and durable Rhinotek. FEATURES: - Designed to protect your prism or range pole - Fold-over flap - Made from Cordura...

AVAILABILITY: This item is usually dispatched same day The C.Scope Metal Pipe Sonde is specially designed with a low frequency 512Hz signal output that is capable of being transmitted through any metallic pipe wall to the surface. This makes it not only ideal for finding the location of a buried met...

Download Brochure Download User Manual AVAILABILITY: This item is usually dispatched same day LS-100D Receiver Only, Clamp "Holder 110" sold separately. The LS-100D is the newest addition to the Topcon range. The laser receiver is designed to make elevation and vertical alignment control faster and...

AVAILABILITY: This item is usually dispatched same day GE Protimeter Replacement pin needles 1"(25mm). Fits: Mini, Digital Mini, Timbermaster, Surveymaster, MMS2 and remote probe BLD5060

AVAILABILITY: This item is usually dispatched same day Lightweight carbon fibre composite and aluminium GPS pole, 30% lighter than similar prism poles. Centimetre graduations with locks at 1.8m, 2m and 2.2m measurements. Designed so the GPS surveyor has all the features needed in a single rod, ideal...

AVAILABILITY: This item is usually dispatched same day The Seco 2.6 m Telescoping TLV Pole with Fine Metric Grad is designed with TLV locking mechanism combined with fine 2 mm/cm graduations. With a soft touch knob that is easy to tighten and loosen, this pole comes with a 40-minute high-visibility...

AVAILABILITY: This item is usually dispatched same day The Claw is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it. Designed for: Trimble TSC3 Data Collectors and made...

AVAILABILITY: This item is usually dispatched same day Unlike ordinary ball pens which rely on gravity to feed ink, the Rite in the Rain Clicker Pen's replaceable cartridge is pressurised. At nearly 50 pounds per square inch, ink is continuously fed to the tungsten carbide ball, allowing the user to...

AVAILABILITY: This item is usually dispatched same day The Ultralite is the lightest, most user-friendly, pole on the market. 2.6m Twist-Lock non-conductive fibreglass prism pole with adjustable tip and soft rubber knobs to clamp the sections in place. This 2 section red and white banded pole featur...

AVAILABILITY: This item is usually dispatched same day. The Stonex X300 is a fully-featured 3D Scanner, designed to deliver effective results every day, on any project. Its ease of use, reliability, flexibility and incredible price, make it your perfect work companion. FEATURES: - Rugged design - Ea...

AVAILABILITY: Available for immediate download from the Apple App Store or Google Play This roll alarm allows you to mount your device on a ride-on lawnmower, boat, excavator, caravan or any other type of machine, and set the limit for how much tilt is allowed before it becomes unsafe. As the machin...

AVAILABILITY: This item is usually dispatched same day Use this handy adapter to mount a standard survey prism to your Seco fibreglass, SVR or CR Level Staff Grade Rod. FEATURES: - Complete kit - Height ring SPECIFICATIONS: - Fitting: 5/8 x 11 thread with 1/4 x 20 stainless tip - Weight: 70g

AVAILABILITY: This item is usually dispatched same day Use this Pole Adapter on a SECO Quick Change Pole, to achieve a target height of 150mm with a Seco 6400 Series Prism. The Seco Quick Change pole system is designed with a 135mm height offset on the pole graduations, so that you can use the adapt...

AVAILABILITY: This item is usually dispatched same day Designed to carry a prism pole with the tripod attached The bag has a fold-over flap and is made from nylon Cordura and durable Rhinotek FEATURES: - Designed to carry a prism pole with the tripod attached - Fold-over flap - Made from Cordura nyl...

AVAILABILITY: This item is usually dispatched same day The GPS Rover Rod Case is designed to protect the rods during transportation or storage. FEATURES: - Rugged protection for your tow piece GPS pole SPECIFICATIONS: - Suits: 2 piece GPS poles - Weight: 200g - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day Low cost replacement stylus for almost any touch screen product. FEATURES: - Tether cord - Fine tip SPECIFICATIONS: - Length: 90mm

AVAILABILITY: This item is usually dispatched same day Use this Pole Adapter on a SECO Quick Change Pole, to achieve a target height of 150mm with a Trimble RMT. The Seco Quick Change pole system is designed with a 135mm height offset on the pole graduations, so that you can use the adapter of your...

AVAILABILITY: This item is usually dispatched same day Use this Pole Adapter on a SECO Quick Change Pole, to achieve a target height of 150mm with a Topcon 360 prism. The Seco Quick Change pole system is designed with a 135mm height offset on the pole graduations, so that you can use the adapter of...

AVAILABILITY: This item is usually dispatched same day Use this Pole Adapter on a SECO Quick Change Pole, to achieve a target height of 150mm with a Topcon APT1 or APT2 prism. The Seco Quick Change pole system is designed with a 135mm height offset on the pole graduations, so that you can use the ad...

AVAILABILITY: This item is usually dispatched same day Individual flexible prism reflectors made from a high grade conspicuity material. Ideal for dam surveys, monitoring or any situation where multiple measurements to the same point make using a regular prism too expensive or time consuming. FEATUR...

AVAILABILITY: This item is usually dispatched same day Replacement KD500-CII battery charger for Nedo Sirius, Fukuda and Spot-on General, Powerline, and Extreme range of rotary lasers. FEATURES: - LED Charging Status Light SPECIFICATIONS: - Suits: Nedo Sirius, Fukuda and Spot-On General, Powerline...

AVAILABILITY: This item is usually dispatched same day This USB cable allows you to transfer data between your Horizon G5 data collector and your computer. FEATURES: - Solid plugs SPECIFICATIONS: - Plug1: USB - Plug2: Type-B - Compatible with: Horizon G5

AVAILABILITY: This item is usually dispatched same day A high performance controller in a compact design delivering quality results. The G5 is a waterproof (IP65) handheld controller with an integrated cell modem and Bluetooth connectivity allowing the user to easily connect to GNSS receivers cable...

AVAILABILITY: This item is usually dispatched same day An excellent quality, stable bipod with push button release. Perfect when levelling or using a digital level to keep your staff stable whilst reading. Please note, only suitable for standard level staves, between 40 65mm wide, some invar staves...

AVAILABILITY: This item is usually dispatched same day The Clamp model 110 features a static thread, which allows you to clamp to wide surfaces without the clamp's thread hanging out the side of the clamp in harms way. FEATURES: - Light weight - New design for extra strength - Static thread SPECIFIC...

AVAILABILITY: This item is usually dispatched same day The Seco pole adapter is designed to be used with Seco Quick Change prism poles, to achieve desired height for your prism and application. Quickly and easily convert the pole for another application by changing the adapter. Compatible with any o...

AVAILABILITY: This item is usually dispatched same day Use this Pole Adapter on a SECO Quick Change Pole, to achieve a target height of 150mm with a Leica GPR111, GPR121 or GPH1 prism. The Seco Quick Change pole system is designed with a 135mm height offset on the pole graduations, so that you can u...

Trig Instruments offers a range of industry training courses, designed to assist users to work safely, using best industry practices to get the best possible work performance from their equipment. Our courses are not brand specific and are open to all equipment owners, not just our customers. All co...

AVAILABILITY: This item is usually dispatched same day Don't ruin the single most important element of your device. Screen Protectors are a thin clear plastic film that is applied over the surface of the screen to prevent scratching. When a screen gets scratched, it becomes un-calibrated, meaning th...

AVAILABILITY: This item is usually brought in to order Seco bags cases are made to exacting standards from heavy-duty, water-repellent, 1000 denier nylon. These nylon bags are heavily padded for prisms, tribrachs, and prism/target assemblies. FEATURES: - Heavily padded for single or triple prisms -...

AVAILABILITY: This item is usually dispatched same day 4.6m Twist-Lock aluminium prism pole with removable 5/8th threadded top can be replaced with an optional bayonet tip if required. Soft rubber knobs to clamp the sections in place. This 3 section red and white banded pole features a centimetre gr...

Download User Manual AVAILABILITY : This item is usually dispatched same day The C.Scope Tracing Rod is an economical solution to the problem of tracing the route of plastic pipes and conduits. The tracing rod costs little and saves the contractor valuable time when the route of a plastic pipe need...

AVAILABILITY: This item is usually dispatched same day The Trilex GC100 2D Grade Control system uses your laser to give level or grade to provide accurate hydraulic dual machine control. Two large laser receivers mount on either side of the grader blade and connect in to a control box to give full a...

AVAILABILITY: This item is usually dispatched same day Scratch resistant acrylic target plate to suit models from Trilex, Laisai, Spot-On, GeoTuff, Bell Precision and others. The Green targets are for the Green beam models and the Red targets are for the Red beam models. Two sizes available to suit...

AVAILABILITY: This item is usually dispatched same day Rugged target holder with built in bubble vial to suit Trilex RB-1, GB-1 and Topcon TP-L3, TP-L4, TP-L5 and TP-L6 size target cards. FEATURES: - Built in bubble vial SPECIFICATIONS: - Suits: Trilex RB-1, GB-1 and Topcon TP-L3, TP-L4, TP-L5 and T...

AVAILABILITY: This item is usually dispatched same day The Trilex 2m Two-Piece Rover Rod is composed of carbon fibre. Essential for any GPS application, the pole features 5/8 x 11 threaded tip and a 40-minute vial. Weighing only 1.17kg, the carbon fibre shaft is durable for daily surveying tasks. FE...

Download Brochure AVAILABILITY : This item is usually dispatched same day. Easy-to-use, high precision, rugged and reliable. The Horizon H70 series includes 1", 2", 3" and 5" models and incorporate many new technologies whilst still maintaining Horizon's easy-to-use functionality. New features incl...

Download Brochure Download User Manual AVAILABILITY: This item is usually dispatched same day The LS-100D is the newest addition to the Topcon range. The laser receiver is designed to make elevation and vertical alignment control faster and easier for all applications with a digital readout of mill...