a little tuning co 325 views   1 clicks Claim this Business♡

Upgrade the look of your engine bay with an IE 2.5L 5 Cylinder Fuel Rail. The perfect solution for setting up aftermarket fuel systems or completing that show-ready look. Also available in an attractive anodize finish perfect for running ethanol or corrosive race fuels.Product Features• Easy start...

We're proud to offer 034Motorsport Density Line Rear Adjustable Upper Control Arms for MkV/MkVI/MkVII Volkswagen and 8J/8P/8V/8V.5/8S Audi applications! 034Motorsport's Density Line Rear Adjustable Upper Control Arms allow for simple and precise camber adjustments. Dialing in your alignment has neve...

Make the most out of your new strut mounts and replace the upper strut bearing while you're in there. These front bearings see a lot of load from the front of the car, and will wear and become noisy over time. This simple replacement will make for improved ride quality when refreshing your front sus...

034Motorsport Solid Aluminum Subframe Bushing Upgrade Kit for the MkIV Volkswagen R32 and 8L/8N Chassis Audi Quattro cars. Our billet aluminum subframe mounts are designed as a direct replacement for the factory rubber subframe mounts, and lock down the rear subframe.The factory rear subframe bushin...

We're pleased to announce the availability of our Density Line/Motorsport Hybrid Bundle Motor Mount Set for the MkIV Volkswagen and 8L/8N Audi chassis!034Motorsport has assembled the Density Line/Motorsport Hybrid Bundle for the serious trackday guru and seeker of ultimate performance. This kit incl...

We're proud to announce the availability of the Motorsport Billet Dogbone Mount for MkIV chassis Volkswagen and 8L & 8N chassis Audi models!034Motorsport's Motorsport Dogbone Mount is the new standard in performance and durability. This dogbone mount was designed with performance in mind, manufactur...

High rate dual valve spring set for the 24v VR6, includes spring seats and Ti retainers which allow for higher lift than stock retainers, at half the weight.Specs:- 13.90mm max lift- Coil bind at 17mm- Rate 12.6lbs/mmPrice for one complete set, enough for one engine.

Valve set for the 24v and R32 motors, stock size for the R32. Back cut and swirl polished valves for higher flow. Intake valves are stainless steel with a nitride coating, exhaust valves are Inconel for turbocharger use.Great upgrade for either the 24v or R32 motor looking to get more flow and under...

Finally, an affordable head stud set for the 24v VR6, we build this set using ARP hardware, this is not an "off the shelf" ARP kit. Features 11mm studs with nuts, washers and ARP moly lube. Does not fit the R32 motor w/o modifications, the R32 uses 10mm studs, to fit on an R32 the block must be tapp...

This oil filter housing adapter allows the use of an external oil cooler, and remotely mounted oil filter. Large threaded holes are 7/8" x 14 which is -10 AN thread pitch, any o-ring seal -10 bung will thread right in.Also features Q2 - 1/8" npt threaded holes for turbo oil feed, oil temp, oil press...

:This OE style 60mm exhaust clamp is the perfect size for all 60mm exhaust tubing like that found on the Audi C7 S6/S7. This clamp applies clamping force evenly around the tubing, providing excellent hold and sealing capability without crushing the tubing. Features:- Stainless Steel Construction- OE...

The IE air intake system for your Audi S6 or S7 4.0T engine is the result of extensive engineering methods to validate a truly unique performance design. 3D scanning, radpid protoying, rigerous back-to-back flow bench validation, dyno testing, and track proven to produce real power, torque, and soun...

#N/A

AUDI C7/C7.5 S6 & S7 DSG TCU UPGRADE The iE DSG Transmission Tune for your Audi C7/C7.5 S6 or S7 4.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, improved launch control and additional transmission performance features when paired with the matching ECU tune. Ac...

Upgrading to IE Midpipes on your Audi C7/C7.5 S6 or S7 is an easy and fast way to add an aggressive V8 sound. Superior engineering and quality craftsmanship ensure a long-lasting upgrade for your 4.0T powerplant with a fun and addicting exhaust note. HIGH-FLOWSTRAIGHT PIPERESONATOR DELETES TIG WELDE...

Switch the radio off and roll your windows down; IE's X-pipe Exhaust Upgrade for your 4.0T S6 or S7 replaces the giant suitcase center resonator with a stainless steel X cross-section straight pipe. This affordable exhaust modification releases an addicting V8 exhaust note turning your C7/C7.5 into...

New OEM tie rod ends for B5 Audi A4/S4 and B5 Passat, as well C5 A6 cars.Not a performance upgrade, just a factory replacement for your worn tie rod ends, maintains rubber isolation for good NVH and comfort.

Revised all metal tie-rod end cures many problems with the initial Audi & V/W design. Also features a heavy-duty ball and socket assembly.This updated, heavy duty design improves steering response, as well as the durability of the tie rod ends.Priced individually. One vehicle requires two tie rod en...

We now offer a rebuild kit for 034Motorsport Density Line Adjustable Upper Control Arms! These parts are a direct replacement for the rod ends and dust boots that are supplied with brand new arms.What's Included:- Aurora Spherical Rod Ends (Set of 4)- Jam Nuts (Set of 4)- Rubber Dust Boots (Set of 4...

Engine block checkvalve for all Audi I5 motors, should be replaced during any rebuild, threads into block and supplies all the oil to the cylinder head.Brand new, in stock, each block requires one.

We're pleased to offer our High-Flow Silicone Turbo Inlet Hose for the Audi UrS4 and UrS6!Factory rubber turbo inlet boots get the job done decently on a stock application, but have many problems once boost is turned up and performance increased.Due to the lack of reinforcement, its common to see th...

Upgrading our Audi 3.0L turbocharged engine with aftermarket upgrades such as ECU tunes and larger turbos adds fast and easy power, but demands more airflow in return. The factory airbox and turbo inlet are adequate enough for stock power output, but become a large restriction on engines with afterm...

IE's carbon fiber intake system flows 37% more than the stock intake & inlet on the factory turbocharger and up to 61% more on hybrid turbo setups. This increase translates to a maximized flow rate that significantly improves turbo & engine efficiency resulting in power gains of up to 19HP & 21ft-lb...

The IE Polymer Air Intake System for your Audi B9/B9.5 S4 or S5 delivers easy performance through significant airflow gains. Add up to 19 horsepower and 21ft-lbs of torque on tuned engines while maintaining lowered intake air temps. A factory-like install delivers power, sound, and fun without sacri...