Action Fishing Nets Flounder Drag Net Mesh 230m 210D 18ply Heavy Duty 4.75 Inch Ultra Durable For Commercial Anglers
Built for the grind of flounder dragging, this purpose-made mesh gives you the strength, consistency, and working length net makers ask for. Action Fishing Nets engineered this unslung netting to take repeated bottom contact while keeping your build process simple: one continuous 230‑meter roll with a proven 4‑3/4 inch mesh opening, ready for new nets or reslinging tired gear. Why serious net builders choose this mesh
- Workhorse twine, fewer failures: 210D/18ply multi‑strand cotton rag netting resists abrasion from sand, shell, and structure while maintaining dependable knot hold.
- Long, uninterrupted roll (230m): Cut exactly what you need and reduce weak spots from joins or short hanks—crucial when a loaded drag is on the bottom.
- Dialed‑in flounder opening (4‑3/4"): A field‑tested hole size that balances bycatch control with steady, efficient hauls.
- High mesh count for uniform drag: 1920 meshes promote even spread and fewer escape gaps, helping you maintain consistent catch rates.
- 30md build spec: The thickness net makers look for when they need a stout, reliable panel that stands up to season‑long use.
- Deck‑visible green: The practical green shade is easy to see against gunwales and water, making inspections and repairs faster.
- Proven load confidence: Approx. 80 lb breaking strain (based on comparable 210D/18ply references) supports heavy pulls and surge loads common in drag work. Designed around real fishing scenarios
- Renew a working net: Replace worn sections to restore uniform drag and extend the life of your existing rig.
- Build to your boat and bottom: Start from a fresh roll to tailor panel length, footrope spacing, and target depth profiles.
- Efficient reslinging: Cut, thread, and tie into old looms with standard knots—save both time and material cost.
- Seasonal readiness: Keep a roll on hand for quick turnarounds between trips so weather windows don’t go to waste. How it outperforms common alternatives
- Consistency over patchwork: One-piece length reduces mid-season repair points versus piecing together short off-cuts.
- Built for abrasion: The 18‑ply twine and 30md thickness deliver the ruggedness bottom gear demands.
- Optimized for flounder, not generic use: The 4‑3/4" opening and dense mesh layout are selected with drag efficiency in mind. Who it’s made for
- DIY anglers who maintain their own flounder nets and want reliable, long-length material.
- Small to mid‑size operations needing a durable roll that covers multiple reslings or a fresh build without supply‑chain guesswork.
- Any captain or crew who values easy identification on deck and predictable performance on the ground. Care that pays you back
- Rinse with fresh water after salt exposure to limit salt crystallization on fibers.
- Dry thoroughly before storage to prevent mildew on multi‑strand cotton netting.
- Inspect knots and high-wear edges at season’s end; replace localized sections before they escalate to panel failures. Specifications
- Material: 210D/18ply multi‑strand cotton rag net
- Mesh opening (stretched): 4‑3/4 inches
- Mesh thickness: 30md
- Meshes: 1920
- Length: 230 meters (single continuous piece)
- Color: Green
- Approx. breaking strain: ~80 lb (reference for similar ply)
- Category: Fishing Nets / Sea fishing drag gear
Bottom line: If you’re rebuilding, reslinging, or outfitting a flounder drag from the ground up, this 230m Flounder Drag Net Mesh Strong delivers the abrasion resistance, mesh geometry, and uninterrupted length that keep boats working and hauls consistent.