Agile Performance 114 views   1 clicks Claim this Business♡

We are pleased to finally introduce the first BOLT ON steering angle kit for the Toyota A70 supra or Z20 Soarer.The Regular kit with rack spacers can provide up to approximately 50 degrees of angle depending on wheel clearance and alignment.Our regular kit is able to be installed with only the use o...

These spacers are installed on the steering rack, spacing the rack end further out and allow the steering rack shaft to travel further inside the steering rack. This allows for an increase in steering lock resulting in more angle while drifting. Made from CNC cut stainless steel 5.5mm thick provide ...

These Toe arms are CNC cut from steel bar then have the sway bar tabs welded on and powdercoated black for a great looking finish. They are reverse threaded for live adjustment on the car (though due to the sway bar link only in a full rotation) using a teflon lined chromoly rose joint on one end wi...

These Camber arms are CNC cut from steel bar then powdercoated black for a fantastic looking finish. They are reverse threaded for live adjustment on the car using a teflon lined chromoly rose joint on one end with cnc machined stainles steel spacers and a black powder coated u joint on the other en...

Here we have the first kit available for a cheap dual rear caliper kit. This kit provides brackets and hardware ONLY to mount a jza80 single pot caliper to use as a hydraulic handbrakeThis kit is so you can run a dual caliper set up using the stock caliper for the foot brake and the jza80 single pot...

Here we have the first kit available for a cheap dual rear caliper kit. This kit provides brackets and hardware ONLY to mount a stock rear caliper if you have done the Evo/STI rear brake upgrade (you must get these parts on your own)This kit is so you can run a dual caliper set up using the stock ca...

Here we have the first kit available for a affordable dual rear caliper kit. This kit provides brackets and hardware ONLY to mount 2 sets of Evo Brembos if you have done the Evo/STI rear brake upgrade (you must get these parts on your own)This kit is so you can run a dual caliper set up using 2 of t...

Powder coated steel brackets to suit a JZ engine facelift 89-92(round mount) a70 Supra. Pictured are the facelift bracketsNow the brackets are different for different years so please be sure this is the correct ones for your carwe also have solid mounts available too.

This is for a pair of fabricated steel solid engine mounts powder coated in black.Available for facelift or pre facelift they are different so please select the correct one for your application if you are unsure which to use just send us a message first.Items are made to order please allow 2-3 weeks

Please select carefully as this is bolt for the older kits and Will not work with the new ones.We have very limited stock of these left and won't be making more. We can however update your old kit to the new one please if this is required.this is for 1 spare bolt kit to use in the a70/z20 and jza80/z30 angle kitsIncluded is1x tierod bolt1× tapered washer1x each large and spring washer1x split pin

This kits made by Hel consists of 3 hoses a T piece and optional Banjo Fittings. Lines are black.Banjo Fitting is required if you plan to use this kit to run jza80, sc300-400, z30 calipers. Its not required on the factory a70/z20 supra caliper kit.If you are unsure please ask.

This is the rod end used on our angle kits it a 5/8" Eye 5/8" Right hand Thread and price includes a Jam nut and high misalignment spacers.This is a 3 piece chromolly rod end.It is a direct replacement for the older black high misalignment rod ends we used to use in our angle kits.We have found these items to have a much longer life span than the older ones and are now the standard supplied units.

Now available!These our our rear upper adjustable control arms.They feature poly bushings to attach to the subframe end.And have live adjustment on the hub side with a 3 piece chromolly rod end.The great advantage of these arms is quick and east adjustment of the camber. Traditionally you'd need to ...

Here we have our V2 extended trackwidth arms available for the mk3 Supra a70/z20 Soarer.The lower is live adjustment so no more removing the rod ends from the subframe to make changes.The "zero" setting on these arms you will have the large adjuster wound all the way in and have the Rod end wound ou...

Please select carefully as this is the updated bolt and won't work with the old kits.This is for 1 spare bolt kit to use in the a70/z20 and jza80/z30 angle kitsIncluded is1x tierod bolt1× tapered washer1x each large and spring washer1x split pin

A70 Supra & Z20 Soarer Front Lower Live adjustable Control ArmsAfter a very long development and testing process, we are finally ready to release these.Production versions will be Black as standard. As with most of our products these can often be made to order so if you have a specific time frame it...

We are pleased to finally be able to offer adjustable front upper control arms for the mk3 a70 supra/ z20 Soarer.These are adjustable via slots on the arm allowing you to slide the toyota ball joint back and forward with an adjustment range of approximately 0.5 to -2.5 degrees of camber. Also includ...