KwikWire Clamp

KWIKWIRE CLAMP & WIRE ROPE is designed to suspend static loads. Its Hanging and Installing Service applications include Ducting, Roof Suspension Systems, HVAC, Signs, Hanging Mechanical Services, Electrical Services, Installing Cable Trays, Strut, Lights, Shade Sails, Mining Supports, Balustrade and Catenary.

Rectangular/Circular duct is one of the most common applications used with. The hangers can be attached to bearers, fastening points on the duct if available, or used in a cradle method.

Suspend ducting from the ceiling is simple and fast using the versatile and flexible Cable System

(1) Pass the wire rope through, looping around & back through the KwikWire™ Clamp

(2) Push wire rope through clamp leaving 2" to 3" tail, then apply tension on wire rope

(3) To adjust, remove tension and pull wire rope slightly to disengage teeth, slide adjustment

pin in the direction shown by arrow to release the wire rope.

No tools are required.

- Mechanical and Electrical Services
- Seismic Bracing & Other Suspended Services
- Heating, Ventilation and Air-Conditioning Services
- Panels for Cold Rooms

KwikWire System Recommendations:

- Do NOT Exceed the Safe Working Load of the products
- loadings are guaranteed ONLY when used in with KwikWire Wire Rope
- Do NOT apply Lubricant, use in Chlorinated/Caustic atmospheres, use in Dry locations only
- Do NOT use if Cable/Components are Visibly Distorted/Worn. Remove Damaged Cable prior to use
- Do NOT Paint Cable near Working Area of
- Do NOT use Clamps on Coated Wire Rope