a little tuning co 295 views   1 clicks Claim this Business♡

Coated main bearing (Crankshaft) set for the Audi I5 10v and 20v motors, including S2 and RS2. First we start with an OE main bearing set, then coat them with the most advanced anti-friction coating available.Dry film lubricant that is technically engineered to withstand extreme performance pressure...

Coated main bearing (Crankshaft) set for the VW VR6 motor. First we start with an OE main bearing set, then coat them with the most advanced anti-friction coating available.This bearing set fits virtually all VR6 motors through 2005.Dry film lubricant that is technically engineered to withstand extr...

Thrust Washer set for the Audi 2.7T and 2.8L 30V motor. A recommended "while you're in there" purchase when replacing main bearings.Fitment: - 1998 - 2001 Audi A4 (B5) - 2.8L 30V- 2000 - 2002 Audi S4/RS4 (B5) - 2.7T- 1998 - 2004 Audi A6 (C5) - 2.7T / 2.8L 30V- 2001 - 2003 Audi Allroad (C5) - 2.7T- 1...

Coated bearing set for the VW/Audi 1.8t 20v motor. First we start with an OE crank bearing set, then coat them with the most advanced anti-friction coating available.Dry film lubricant that is technically engineered to withstand extreme performance pressure. Using coated engine bearings increases ho...

Coated bearing set for the Audi 2.7T and 2.8L 30V motor. First we start with an OE crank bearing set, then coat them with the most advanced anti-friction coating available.Dry film lubricant that is technically engineered to withstand extreme performance pressure. Using coated engine bearings increa...

CALICO COATED MAIN BEARINGSThis is high quality main bearing set for Audi V6 30V Engines, made by Glyco, an OEM supplier. After we receive them, they are sent out to Calico for an anti-friction coating. This will promote longer bearing life, while reducing friction to increase performance.ARPThese a...

2.5L/2.5T ACL/CALICO ROD BEARINGSThese are the real deal Calico Coated ACL Race Bearings for your VW or Audi 2.5L 5 cylinder engine. ACL brand race bearings are used as the base bearing shells for their hardened steel backing that provides an increased bearing crush for better bearing shell retentio...

ACL RACE BEARINGSMain bearings are a critical component to your VW or Audi performance engine build and responsible for keeping your engine together under increased loads and temperatures. ACL premium race bearings provide higher reliability and increased tensile strength through metallurgical engin...

STRONGER SHELL RETENTIONThese bearings are the real deal coated bearings. Not just spray painted OEM bearings, these start as premium ACL brand race bearings. These base bearing shells feature a hardened steel backing, with increased bearing crush for better bearing shell retention (less likely to s...

MAHLE MOTORSPORT/VANDERVELL RACE ROD BEARING SET FOR 2.5L/2.5T 5 CYLINDER ENGINESWith over 70 years of race bearing manufacturing, Mahle Motorsport, formerly known as Vandervell, manufactures the highest quality race bearings available. They have been proven time and time again by F1 race teams, and...

OEM MAIN BEARINGS SET FOR 2.0T TSI ENGINESWhen building an engine, new bearings should be installed. With no aftermarket options for the 2.0T TSI engines, we have sourced these genuine bearings for them. These are all the standard size to fit cranks that have not been machined. Sold in a complete set of ten half-shells. PART NUMBERS - 06H 105 591 J GLB- 06H 105 591 L GLB

Coated tangless rod bearing set for the VW/Audi 06A/06B motors. First we start with an OE rod bearing set, then coat them with the most advanced anti-friction coating available.Dry film lubricant that is technically engineered to withstand extreme performance pressure. Using coated engine bearings i...

Coated rod bearing set for the VW/Audi 4-cyl motor. Fits virtually all 4-cyl motors, including early 058 block 1.8t, and later 4-cylinder motors using Scat or Pauter forged rods with TANGED bearing provisions. (See here for Tangless Rod Bearings)First we start with an OE rod bearing set, then coat t...

Coated rod bearing set for the Audi I5 20v motor (also fits most non-MC 10v engines). First we start with an OE rod bearing set, then coat them with the most advanced anti-friction coating available.Dry film lubricant that is technically engineered to withstand extreme performance pressure. Using co...

Coated rod bearing set for the Audi 2.7T and 2.8L12V / 30V V6 motors.First we start with an OE rod bearing set, then coat them with the most advanced anti-friction coating available.Dry film lubricant that is technically engineered to withstand extreme performance pressure. Using coated engine beari...