Duotight Gen 2 - 8mm (5/16) Adhesive Wall Clip - 2 Pack

Made exclusively for the Duotight manifolds and Gen 3.0 D uotight 8mm fittings to be mounted to a flat surface.

These can swivel around if you need to mount on a particular angle once stuck down.
They can also easily be removed from the 8mm Duotight side as they simply click/clamp in to each other.

If you are to mount this inside your Kegerator / Keezer, you must do so when the unit is off / warm. It will not stick as well in a moist / cold environment. Best to give it at least 24 hours of stick time before attaching weight / hosing to it.

Wipe down surface with isopropyl alcohol prior to sticking.

Most commonly to be used with:

- 8mm (5/16) duotight x 6 Way Manifold with Check Valves & Isolation Valves
- 8mm (5/16) duotight x 4 Way Manifold with Check Valves & Isolation Valves
- 8mm (5/16) duotight x 2 Way Manifold with Check Valves & Isolation Valves
- and duotight - 8mm (5/16) x 5 Way Multi-Tee

If you want to know if your Duotight fitting will fit this, it must be a grey Duotight that has a black collet piece.
Not suitable for 8mm ball lock disconnects
Not suitable for multiple re-applications

From: Kegland