Alpine Car Audio 1 views Claim this Business♡

Zeroflex FLX-10SE 250w slim enclosure and 10" subwooferThe FLX-10SE brings serious low-end power to places where normal subs just don't fit.At just 65 mm thick, this sealed 10″ enclosure tucks neatly behind seats, under rear cargo floors in wagons or SUVs, or sidewalls in vans without sacrificing...

Cerwin Vega VPS-TX12 12" low profile "spare tyre" subwooferPower Handling:- Peak: 600 watts- RMS: 150 watts- Subwoofer Size: 12" (actual size: 11.3")- Phase inversion switch: 0 or 180 degrees- Cast aluminium enclosure- RCA high-level inputs- Low pass filter: 50 - 150Hz- Subsonic filter: 20Hz- Freque...

ESB HR 11 swThe HR 11 SW is an active subwoofer that fits inside the rim of the spare in your boot.The die-cast aluminium case makes it sturdy and long-lasting.The HR 11 SW provides a powerful and dynamic sound thanks to a dual voice coil speaker and a 200-watt Class D digital amplifier. With the in...

Zeroflex FLX184SQ Ford Ranger Toyota Hilux subwooferDirect fit for most Ford Ranger (PX2, PX3 - 2007-2022)Toyota Hilux (N70 - 2014-2024)The best way to get bass in your dual-cab Ranger or Hilux without removing the rear seats.- ZeroFlex ZF8XL 8" 200W RMS Single 4 ohm Voice Coil Car Subwoofer- Direct...

Recommended DSP settings "Self-define" highpass 44 Hz / Q = 1.6;EQ filter: 115 Hz / Q = 0.9 / -3.5 dB

Recommended DSP settings "Self-define" highpass 35 Hz / Q = 1.0;EQ filter: 60 Hz / Q = 1.0 / -1 dB

Recommended DSP settings recommended "self-define" highpass filter with 37 Hz cut-off frequency and Q = 1.2additional EQ filter 95 Hz / Q = 0.7 / -3 dB

ESB3.10D2 Enclosure10" subwoofer in custom slotport enclosureSubwoofer Technical Specifications- Nominal Impedance: 2 2 Ohm- Nominal Power Handling: 300 W- Peak Power: 600 W- Frequency Response: 29 Hz ~ 350 Hz- Sensitivity: 86.5 dB 2.83v/1m

ZeroFlex EFX-12P 12" sub and box12'' Passive Loaded Enclosure (non-amplified)400RMS Power Handling1200W Peak Power Output35Hz Low Tuning FrequencyInternal Volme 54L / 1.9cf2'' CCA Voice CoilFrequency Range 30Hz-200hz10ga Wiring Kit IncludedDimensions W 567mm x D 323/405mm x H 391mm

Rockford P3-2X12 Punch Dual P3 12" Loaded EnclosureThe P3-2X12 is a dual P3 12" vented enclosure with 1200 Watts RMS power handling wired to a 1-Ohm load. Nominal Impedance: 1-OhmInternally wired to create a 1-Ohm amplifier load Power Handling (Watts RMS) 1200 Watts RMS2400 Watts Max Woofer Size 12...

Recommended DSP settings "Self-define" highpass 37 Hz / Q = 1.2;EQ filter: 95 Hz / Q = 0.7 / -3 dB

Installation depth 114 mm / 4.5"

Installation depth 95.6 mm / 3.8"

Weight 3.6kg

Resonance frequency Fs 49 Hz

EFX-12a subwoofer 12" subwoofer enclosure with built-in amplfier- 12'' Active Basspack- 250 RMS Inbuilt AB Amplifier- 750W Peak Power Output- Low Level Input 0.5v - 5.5V- High-Level Input 2.4v - 10.5v- 35Hz Low Tuning Frequency- Internal Volume 54L / 1.9cf- 2'' CCA Voice Coil- Frequency Range 30Hz-2...

Installation depth 84.5 mm / 3.33"

Installation depth 84.5 mm / 3.33"

Installation depth 95.5 mm / 3.76"

Helix 10" subwoofer and enclosureFits under the rear bench seat in late model Mazda BT50 and Ford Ranger utes.Fibreglass enclosure made specifically for BT50 and Ranger.

Driver Displacement Volume 1.12 l (0.04 ft)

1.10SD2 10" shallow sub- Only 95 mm depth- Polystyrene cone with long-throw rubber surround- 2.1"/53 mm voice coil and 40.5 Oz ferrite magnet- Power Handling: 500 Watts of Maximum Power Technical Specifications- Nominal Impedance: 2 2 Ohm- Nominal Power Handling: 250 W- Peak Power: 500 W- Frequency...

Slim 10" subwoofer and enclosurePerfect fit for late model Ford Ranger and Mazda BT50 utesDesigned to fit under the rear bench seat for proper bass and audio upgrades.

Audison slim sub and custom enclosure Designed for late model BT50 and Ford RangerFits discreetly under the rear bench seat.