AquaForest Aquarium Studio 81 views   1 clicks Claim this Business♡

Neptune has designed a Magnetic probe rack that will hold up to 4 probes with one hole being slightly over-sized to hold those larger probes like the Neptune temperature probe. By simply placing the MPR in your sump or tank, you can now securely hold all your probes in a single spot.

Optical sensors are the go to sensor if you want a reliable sensor over a long period. The Neptune Optical Sensor plugs directly into the FMM allowing you to monitor the level of your sump, mixing station, or any other reservoir with liquid in itThis sensor plugs into your FMM and, using reflected i...

Optical sensors are the go to sensor if you want a reliable sensor over a long period. The Neptune Optical Sensor plugs directly into the FMM allowing you to monitor the level of your sump, mixing station, or any other reservoir with liquid in itThis sensor plugs into your FMM and, using reflected i...

Calibration Solution sold in single use packets.Almost all pH monitors and controllers will require two points of reference to accurately monitor the pH that the probe is reading. You will want to use calibration solutions that are on either spectrum of the pH you intend to monitor. For reef tanks w...

Apex Neptune System expansion module for pH/ORP Probe and Temperature.Features of the Neptune Systems pH/ORP Expansion Module:- Monitor and Control pH or ORP and temperature- 6 digital inputs for float switches, water on floor sensors, pressure sensors,- Full datalogging support in Apex Base module-...

Apex Neptune System expansion module for monitoring Conductivity/Salinity and Temperature.Features of the Neptune Systems Salinity Expansion Module:- Monitor/Control Conductivity/Salinity and temperature- 4 Measurement ranges (0-900 uS/cm, 0-9.0 mS/cm, 0-90.0 mS/cm, 0-50 ppt)- 6 digital inputs for f...

With the PAR Monitoring kit you can monitor and log your aquarium’s light levels 24 hours a day! The perfect tool to fine tune your lighting on your tank. Now you now can adjust your lights with the confidence of knowing you will not be giving too much or too little light to your corals and plants...

The Neptune PMUP (Practical Multi-Purpose Utility Pump) is great for providing water to feed carbon reactors, and most importantly it can be used as a top off pump. With either the EnergyBar832 or the 1Link Flow Control Module, you can provide power and control directly to the pump without consuming...

This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar 832 products. Common uses include safety stops fo...

Long-life Temperature Probe - replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings.

The versatile VDM Expansion Module can be used as a LED Dimming module to simulate Sunrise/Sunset, Lunar Cycle, Clouds and Lighting with Apex Ready fixtures. Or use the module as a Variable Speed Pump control with Apex Ready pumps such as Tunze Turbelle Stream 6105, 6155 and 6255.- Complete control ...

Neptune System's Replacement Reagent Kit comes with everything you need to change out the reagents for the Trident Marine Water Analyzing System. Each kit comes with new bottles that can be placed directly into the Trident's reagent holder and only takes a few minutes to exchange the old for the new...

When we decided to create an Energy Bar for this new Apex, it was designed from scratch. The Energy Bar 632 not only has six 220V AC outputs, but also includes an internal 100W 24VDC power supply. That power supply powers three built-in 1LINK ports and two 24VDC accessory ports. Each individual outl...

Neptune Systems A3 Apex Pro System -- The most complete experience of monitoring and control for the discerning aquarist- Fully equipped A3 Apex Pro base unit- 4 FMM Ports- 4-Channels 0-10V Variable output- 6 Switch Digital Input- 2 Aquabus Ports- 2 pH/ORP probe ports- 1 Salinity probe port- 1 Tempe...