Aqua Diverter Pre-Tank Filter System
APPLICATIONS
Lifestyle & Rural Tank Water
GENERAL INFO
Also known as the First Flush Diverter. The Aqua Diverter is a manual
Pre-Tank Filter that ensures your tank water is kept pure and free of
sludge and debris.
WHY DO I NEED IT?
Over time a house’s guttering accumulates a lot of debris – dirt, leaf material, loose bird faecal matter. – when it rains that is all washed into your water tank.
The Aqua Diverter Tank system prevents this material entering and
contaminating your water tank by temporarily disconnecting the roof from your water tank. The contaminated water is siphoned off and goes to waste.
It makes sense to prevent debris getting into your water tank – it saves on cleaning and maintenance, and means quality water from any tap in your home.
FEATURES - BENEFITS
- Manual open & close function (great when cleaning the roof)
- Self-Rinsing In-Line Filter
- Maintain with ease and upkeep is minimal
- Can be fitted to both Syphon and Direct set ups, above or below ground water tanks
HOW DOES THE AQUA DIVERTER WORK?
- There are two ways water gets from the roof of your house to your water tank. The first is a siphon system – the pipe work goes below ground then up into your water tank.
- The second is a direct system - the guttering pipe work runs from the roof overhead and straight into your water tank.
- The Aqua Diverter can be connected to any water tank system preventing all those “gutter nasties" from getting into your drinking water. It can even be adapted to fit underground water tanks.
- In simple terms, when the Aqua Diverter is in “flush mode", the head of water between the water tank and the In-Line Filter, rushes down the downpipe. This rinses the inline filter and drops all dirt and debris into the bottom of the sediment tank.
- This is then vacuumed out to waste by opening a slide valve. It’s simple, it saves on maintenance and cleaning and it gives great tasting water, making contaminated water a thing of the past.
MAINTENANCE
The Aqua Diverter Pre-Tank system has very little maintenance to carry out.
The Internal In-Line Filter needs to be cleaned once every six months to ensure no sediment seeps through the In-Line filter.
NOTE: During the Pine Pollen season you will need to clean your In-Line Filter Sock at least once a month.
SPECIFICATIONS
Dimensions: 55cm W x 50cm D x 125cm H for Sediment Tank Manual Valve
Shipping Weight: 22.5Kgs
Variation
In-Line Filter Sock comes standard in 200 micron, however is also available in 400 micron and can be redesigned to suit conditions
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
Download Owners Manual
Download Technical Sheet