GREEN Reverse Osmosis Membrane, 50 GPD TFC NSF (189 Litres Per Day)
Provides High Quality Reverse Osmosis Water GENERAL INFO
The GRO membrane element integrates a 100% dry membrane to help maximize its lifespan and provide enhanced performance to the end user. The unique design of the GRO membrane element offers industry leading recovery rate and allows a quick and retrofit-able design for easy integration. FEATURES BENEFITS
- Double the recovery over standard reverse osmosis elements
- Rejection performance comparable to standard reverse osmosis elements
- High rejection stability at high input TDS
- TLC thin layer composite membrane 100% dry membrane maximizing shelf life
- Available with or without drain line flow control
- Available with and without permeate check valve
- Capillary style drain line flow control kits available and sized for each GRO model
SIZE SPECIFICATIONS
RO MEMBRANE’S CONSTRUCTION
SIZE SPECIFICATIONS
PRODUCT PERFORMANCE
PART NUMBER
NOMINAL PERFORMANCE
DRAIN LINE FLOW CONTROL (ML/MIN)
PERMEATE CHECK VALVE
FLOW GPD (LPD)
REJECTION
GROM-50
(Standard Stock Model)
50 (189)
96
NOT INCLUDED
INCLUDED
Different Flow Rates available 36-75
GLOSSARY:
- REJECTION
- Percentage of total dissolved solids removed from the inlet water. The higher the rejection is, the better the membrane performs.
- RECOVERY
- Quantity of permeate produced compared with the quantity of concentrate rejected to the drain. The higher the recovery, the lower the rejection. GRO ENCAPSULATED ELEMENT HIGH RECOVERY MEMBRANE
Product Tested at 65 psi; 77°F; 50% recovery; 500 ppm NaCl/RO
NOTE: The data above is based on internal laboratory testing Nominal performances are based on a 500 ppm softened tap at 65 psi (4.48 bar), 77°F (25°C), 50% recovery after 25 hours. Individual element flux may vary /- 15%.
DRAIN LINE FLOW CONTROL KITS
SIZE
DRAIN LINE FLOW
CONTROL (ML/MIN)
CARTON QTY.
Kit, GRO-50EN
150 ML/MIN
150 ML/MIN
25
RO MEMBRANE’S CONSTRUCTION
Filters and membrane elements are not to be installed on microbiologically unsafe water supplies. TLC Membranes are not certified to sanitize water, remove cysts, bacteria, or viruses. Filter and membrane element performance can be affected by fluctuations in water quality OPERATIONAL LIMITS
- Maximum Pressure: 125 PSI (6.90 bar)
- Maximum Temperature: 120°F (49°C)
- pH: 4-11
- Free Chlorine: 0.1 ppm