Reverse Osmosis Tank 12 litres
- Constructed from FDA-compliant materials
- Suitable for domestic and light commercial use
- Quality tested during the production process to ensure structural integrity
- ¼" connection (NPT c/w BSPT)
- Dimensions: Height 351mm; Width 279mm
- Weight: 3.5kg
- Max working pressure: 6.9 bar / 100 PSI
- Min temperature: 4 degrees C
- Max temperature: 50 degrees C
- Professional installation recommended
Constructed from the finest FDA compliant materials available, the tanks incorporate a water storage chamber assembled with a virgin polypropylene liner, high-grade butyl diaphragm and patented stainless steel water connection. Every diaphragm is post-cured to remove any elements that can impart odor and taste. This ensures zero secondary contamination and maintains the pure, clean water from the RO system.
These tanks are suitable for domestic and/or light commercial applications.
Constructed of deep drawn steel domes, our RO tanks provide an unparalleled reliability in the reverse osmosis industry. Featuring brass air valve and O-ring sealed air cap, the tanks are also finished with a dual layer polyurethane paint finish.
The RO tanks are constructed of the finest materials available which ensures the tank does not taint the water in any way.
Our RO tanks are quality-tested throughout the production process to ensure their structural integrity.
RO Tank Sanitation:
While RO membranes eliminate the passage of bacteria, periodic “downstream" disinfection is highly recommended. This isparticular so with RO units using the thin-film-composate TFC membranes becauseall chlorine is removed before the RO membrane and storage tank. (CelluloseAcetate CA membranes are chlorinetolerant and this is allowed to flow through the membrane to the tank and is only finally removed just prior to drinking)
Disinfecting a RO storage tank is achieved by adding small amount of household bleach, leaving in the for short time, then flushing it away.