Aquarius Spa Parts 90 views ♡
×-
$137.39Gecko Mspa Temp SensorGecko MSPA-1 Temp Sensor ( can not be used in any other model)Buy from Store 0 0 -
-
$137.39Gecko Regulation temp sensorGecko inpool temperture sensor, used in Microspa , SSPA and MSPA gecko controllers (NOT MSPA-1 white metal box) also S-Class M-Class spa builder controllers50mm bulb length and 10mm diameter, 3m wire length4 pin connector with 3 wires (will also replace some 2 wire sensors used on the same models)id...Buy from Store 0 0 -
$160.50Gecko Hi Limit Sensor - MSPASOLDER ON Gecko MSPA flow through PCB Hi-Limit sensor.Buy from Store 0 0 -
$128.40Gecko SSPA and USPA Microspa SOLDER on Hi-Limit sensor.This is NOT a plug in sensor - it replaces the soldered on hi-limit sensor on SSPA/USPA / Microspa pcbs supplied from within Australia with 2.5" flow through heater tubes.Overall length 80mmWidth 25mmBuy from Store 0 0 -
$250Gecko Hi-Limit Probe - SSPA & MSPA-MPFor Gecko MSPA-1 spa pack only - not interchangeableDoes not suit Gecko MSPA-MP seriesBuy from Store 0 0 -
$125Gecko Hi-Limit Probe - SSPA & MSPA-MP1.2m long lead with hi-limit sensor.Used on Gecko SSPA and Spa Builders S Class systems with remote Laing heaters as well as some Gecko MSPA-MP spa packsBuy from Store 0 0 -
$80Gecko Temperature Sensor Pocket25mm hole size required Gecko or Balboa temperature sensor housing for better temperature regulation. Sensor should protrude approx 8-10mm into spa waterBuy from Store 0 0 -
$28Gecko SSPA Flow Switch CableConnects remote circulation heater flow or pressure switch to Gecko SSPA or Spa Builders S Class system boards.Buy from Store 0 0 -
$37Gecko SSPA Spa Builders S Class Pressure Switch CableUsed on Gecko SSPA or Spa Builders S Class flow through heater systems to connect internal pressure switch to pcb.Buy from Store 0 0
×