Spanet SV Mini 1(3.0kw) Kt

Spanet SV Mini 1(3.0kw) Retro Kit
This retro kit comes complete with the following:
Controller, Touchpad, 3.0kw Heater Element,

- SV Mini 1 230volt outputs
- PUMP 1 , Circ Pump, 1Spd Pump or 2Spd Pump(the pump on this outlet must be pushing water through the heater)
- AUX, 1Spd Pump or Blower
- 230V, this outlet has a constant 230volts and is not switchable (can be used to power a heat pump or any other item requiring a constant 230volts)
- O3/UV, this outlet is only to be used with an ozone system
- SV Mini low voltage outputs
- 1 x Touch pad outlet
- 1 x Light port(can only fit a Spanet SV Series Light in 2.5″ or 5″)
- 1 x Heat Pump Port
- 1 x Wifi Port
- SV Mini Power Ratings
- Input Voltage: 220-240volt 50/60hz
- Rated with mains lead: 15amp max
- Rated when hard wired: 25amp max
- Current rating: this unit is supplied with a 15amp lead and plug but the lead can be removed and the SV Mini can be hard wired with a 25amp power supply.

SV Mini Features

- In heater temp sensor
- Max Temp 41 degrees
- Adjustable Filtration
- Sleep Timer
- Heat Pump Interface
- Wifi Interface
- Programmable Load Shedding

Dimensions
Control box: 315W x 210H x 85D mm
Power lead: 3m
Heater including unions: 310W x 135H x 100D mm
Heater Power Lead: 1.5m (heater lead is hard wired into the controller)
Heater Data Lead: 1.5m
Touch Pad Face Size: 130W x 60H x 30D mm
Touch Pad Hole Size 110W x 40H mm
Touch Pad Lead: 2.3m