Arc Welding & Safety Supplies 7 views Claim this Business♡

# 1G93-R-1/4, KATBAK® CERAMIC WELD BACKINGThis tile is most suitable for those applications where slag is involved, mainly M.A.G. welding with cored wire. It gives space for the slag to go while leaving a good root bead. Each tile is radiuses to form a strip around the cylinder.Similar to the 1 G93...

# 1G93-R, KATBAK® CERAMIC WELD BACKINGThis tile is most suitable for those applications where slag is involved, mainly M.A.G. welding with cored wire. It gives space for the slag to go while leaving a good root bead. Each tile is radiuses to form a strip around the cylinder.Features:- Impart X-ray...

# 1G9-RD, KATBAK® CERAMIC WELD BACKING9.5mm round tile suitable for X preps, K preps and single bevel, single v butt joints (similar to fillet welds) on thin plates up to 10mm thick.Suitable for welding with M.I.G./MAG. solid, flux cored or metal cored wires.Features:- Impart X-ray Quality Back Bea...

# 1G13-RD, KATBAK® CERAMIC WELD BACKING12.7mm round tile suitable for X preps, K preps and single bevel, single v butt joints (similar to fillet welds) on thin plates up to 15mm thick.Suitable for welding with M.I.G./MAG. solid, flux cored or metal cored wires.Features:- Impart X-ray Quality Back B...

# 1G82-R, KATBAK® CERAMIC WELD BACKINGThis tile is most suitable for those applications where slag is involved, mainly M.A.G. welding with cored wire. It gives space for the slag to go while leaving a good root bead. Each tile is radiuses to form a strip around the cylinder.Suitable for thicker and...

# 1G43-R, KATBAK® CERAMIC WELD BACKINGThis tile is most suitable for those applications where slag is involved, mainly M.A.G. welding with cored wire. It gives space for the slag to go while leaving a good root bead. Each tile is radiuses to form a strip around the cylinder.Features:- Impart X-ray...

# 1G42-R, KATBAK® CERAMIC WELD BACKINGThis tile is most suitable for those applications where slag is involved, mainly M.A.G. welding with cored wire. It gives space for the slag to go while leaving a good root bead. Each tile is radiuses to form a strip around the cylinder.Each tile is radiused at...

# 1G41-R, KATBAK® CERAMIC WELD BACKINGThis tile is most suitable for those applications where slag is involved, mainly M.A.G. welding with cored wire. It gives space for the slag to go while leaving a good root bead. Each tile is radiuses to form a strip around the cylinder.Has a slightly smaller g...

# 1G33, KATBAK® CERAMIC WELD BACKINGAll 1G33 tiles are suitable for K or X preps where the bevel angles are 45. 60 or 90 degrees.Suitable for welding with M.1.G.IM.A.G. solid wire, metal cored or flux cored wires.They are a substitute for round tiles where the benefit of the 1G33 range of tiles is...