Beiter - Pin Nocks Symmetric Hunter 25s

The Beiter InOut-Nocks fits precisely into the shaft and preserves the shafts end with the bigger outer diameter.
The InOut-Nock is available only for selected Aluminum-Carbon shafts, both in the Beiter patented ASYMMETRIC version, as well as in the SYMMETRIC type, for Compound archers using a D-Loop.

Some features of the Beiter InOut-Nock, that distinguish them from other makes:

- Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single InOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter InOut-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter InOut Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- The length difference between the Beiter InOut-Nock 2X.S and 2X.L is 4mm: you can slightly adjust the spine of your arrow, by changing the nock length. Pin Nock Symmetric #1 & #2 PIN1H10 Red #10 PIN1H11 Rosso Corsa #11 PIN1H20 Green #20 PIN1H22 Neon Yellow #22 PIN1H30 Orange #30 PIN1H35 Heavy Orange #35 PIN1H40 Blue #40 PIN1H47 Sky Blue #47 PIN1H48 Darkblue #48 PIN1H50 Darkgreen #50 PIN1H57 Heavy Green #57 PIN1H60 Smoke #60 PIN1H61 Black #61 PIN1H71 White #71 PIN1H80 Purple #80