RamRods Vektor 2 Stabilizer (2 Weeks Back Order)

The Vektor 2 sits in the center of the RamRods premium stabilizer lineup.

It balances stiffness and wind efficiency, making it one of the most versatile high performance stabilizers we produce.

It is slightly stiffer but a bit less wind efficient than the Ultra 4, and slightly more wind efficient but less stiff than the Beast.

Because of this balance, the Vektor 2 works well for a wide range of archers across both compound and recurve.

Technical Specifications

Carbon Construction

Ultra high modulus carbon fiber layup

Diameter

Front stabilizers
0.60" base tapering to 0.53" tip

Side stabilizers
0.57" base tapering to 0.53" tip

The Wind Taper profile increases stiffness where the stabilizer experiences the most stress while reducing drag at the tip where wind torque is greatest.

This geometry also improves vibration reduction compared to a parallel carbon tube.

Stiffness

C-Spine: 440

Recommended weight range
Front stabilizer: 3–20 oz
Side stabilizer: 3–30 oz

The Vektor 2 sits between the Ultra and Beast in overall stiffness, making it one of the most versatile stabilizers in the RamRods lineup.

An optional Vektor 2 S version measures 380 C-Spine, providing over 13% additional stiffness for compound athletes who run heavier weight systems.

Side rods are not offered in the S version because shorter stabilizers already provide high stiffness and the performance gain does not justify the additional cost.

End Caps

EDGE aerospace grade aluminum

The redesigned end caps maximize strength at the base of the stabilizer while minimizing weight at the tip. This increases natural frequency and improves aiming responsiveness.

A deeper overlap between carbon and aluminum also increases durability.

Threads

5/16-24 threaded ends

Compatible with standard stabilizer weights, dampers, and conversion screws.

Stabilizer Mass (without weights)

10" – 2.2 oz
11" – 2.4 oz
12" – 2.5 oz
13" – 2.6 oz
14" – 2.7 oz
15" – 2.9 oz

26" – 4.4 oz
27" – 4.5 oz
28" – 4.7 oz
29" – 4.8 oz
30" – 4.9 oz
32" – 5.2 oz

Tungsten VIBRO-Core option adds 2 oz

Note: Stabilizer lengths are measured from end cap to end cap and do not include additional hardware, weights, or dampers.