RamRods Vektor 2 S Stabilizer (2 Weeks Back Order)

The Vektor 2 S is designed for archers who want a stiffer, more responsive stabilizer while maintaining excellent wind efficiency.

It shares the same geometry and overall feel as the Vektor 2, but with increased rigidity that benefits archers running more weight or preferring a more controlled, stable aiming experience.

Within the RamRods lineup, the Vektor 2 S sits between the Ultra v4 and Beast, offering a strong balance of stiffness and wind efficiency.

Technical Specifications

Carbon Construction

Ultra high modulus carbon fiber layup

Diameter

Front stabilizers
0.60" base tapering to 0.53" tip

Side stabilizers
0.57" base tapering to 0.53" tip

The Wind Taper profile increases stiffness where the stabilizer experiences the most stress while reducing drag at the tip where wind torque is greatest.

This geometry also improves vibration reduction compared to a parallel carbon tube.

Stiffness

C-Spine: 380

The Vektor 2 S uses a higher modulus carbon layup than the Vektor 2, increasing stiffness by approximately 13 percent. This places it closer to the Beast in overall rigidity while maintaining a more wind efficient diameter.

Recommended weight range
Front stabilizer: 6–25 oz
Side stabilizer: 6–40 oz

Side rods are not offered in the S version because shorter stabilizers already provide high stiffness and the performance gain does not justify the additional cost.

End Caps

EDGE aerospace grade aluminum

The redesigned end caps maximize strength at the base of the stabilizer while minimizing weight at the tip. This increases natural frequency and improves aiming responsiveness.

A deeper overlap between carbon and aluminum also increases durability.

Threads

5/16-24 threaded ends

Compatible with standard stabilizer weights, dampers, and conversion screws.

Stabilizer Mass (without weights)

10" – 2.2 oz
11" – 2.4 oz
12" – 2.5 oz
13" – 2.6 oz
14" – 2.7 oz
15" – 2.9 oz

26" – 4.4 oz
27" – 4.5 oz
28" – 4.7 oz
29" – 4.8 oz
30" – 4.9 oz
32" – 5.2 oz

Tungsten VIBRO-Core option adds 2 oz

Note: Stabilizer lengths are measured from end cap to end cap and do not include additional hardware, weights, or dampers.