Bikeaholic 133 views ♡

PRAXIS - M30 T47 BOTTOM BRACKETS FOR PRAXIS CRANKS30MM DRIVE BEARING – 28MM NON-DRIVE BEARINGThe M30 bottom bracket family is for the Praxis M30 spindle based cranks. The M30 spindles are 30mm and then have a step-down to 28mm to lock on the Non Drive bearing. These use a drive side wave-washer fo...

PRAXIS - BSA THREADED BOTTOM BRACKET FOR SHIMANOOur standard BSA English threaded BB is Shimano™ compatible. The 7075 T6 alloy cups feature CNC finishing and standard anodizing. Smooth and durable, the high-grade Enduro 2437 steel bearings are fully sealed and are a fantastic replacement BB for yo...

PRAXIS - M30-THRU T47 BOTTOM BRACKETS

PRAXIS - M30 BB30/PF30 BOTTOM BRACKETS FOR PRAXIS CRANKS30MM DRIVE BEARING – 28MM NON-DRIVE BEARINGThe M30 bottom bracket family is for the Praxis M30 spindle based cranks. The M30 spindles are 30mm and then have a step-down to 28mm to lock on the Non Drive bearing. These use a drive side wave-was...

TECH C.R.A.F.T. Cabon Mfg.

PRAXIS - M30 M30-BB86/BB90/BB92/DH 104.5/DH 107 BOTTOM BRACKET FOR PRAXIS CRANKS30MM DRIVE BEARING – 28MM NON-DRIVE BEARINGThe M30 bottom bracket family is for the Praxis M30 spindle based cranks. The M30 spindles are 30mm and then have a step-down to 28mm to lock on the Non Drive bearing. These u...

PRAXIS - M30 BBRight BOTTOM BRACKET FOR PRAXIS CRANKS30MM DRIVE BEARING – 28MM NON-DRIVE BEARINGThe M30 bottom bracket family is for the Praxis M30 spindle based cranks. The M30 spindles are 30mm and then have a step-down to 28mm to lock on the Non Drive bearing. These use a drive side wave-washer...

PRAXIS - M30 BSA BOTTOM BRACKETS FOR PRAXIS CRANKS30MM DRIVE BEARING – 28MM NON-DRIVE BEARINGBSA / English Threaded M30 bottom bracket for installing a Praxis M30 Spindle based crank into a BSA English threaded frame.SPECIFICATION- PRODUCT M30 BSA BB: For use with BSA threaded frames - also known...

PRAXIS - M30 THRU BSA BOTTOM BRACKETThis is our M30-THRU BB for installing our Doon & Lyft into BSA THREADED frames.30mm DRIVE / 30mm Non-DRIVEAlso good for other brand 30mm cranks like SRAM, RaceFace/Easton “Cinch" cranks, Rotor Rex/3D cranks, and CaneCreek eeWings.SPECIFICATIONS- BUY THIS IF : Y...

PRAXIS - M30 THRU BB86/90/92 BOTTOM BRACKETM30-THRU BB for installing Praxis Doon & Lyft cranks into either BB86, BB90 or BB92 frames.Also good for other brand 30mm cranks like SRAM, RaceFace/Easton “Cinch" cranks, Rotor Rex/3D cranks, and CaneCreek eeWings. See full spec and notes below.30mm DRIV...

PRAXIS - M30 386EVO BOTTOM BRACKET FOR PRAXIS CRANKS30MM DRIVE BEARING – 28MM NON-DRIVE BEARINGThe M30 bottom bracket family is for the Praxis M30 spindle based cranks. The M30 spindles are 30mm and then have a step-down to 28mm to lock on the Non Drive bearing. These use a drive side wave-washer...

PRAXIS - BSA BOTTOM BRACKET FOR SRAM DUB CRANKSOur Praxis BSA threaded BB for SRAM® DUB™ cranks. Forged and machined cups finished and black anodizing. High-grade Enduro steel bearings are at the center of this BB.SPECIFICATION- P RODUCT: PRAXIS BSA BB for SRAM™ DUB 29mm spindle cranks into a B...

PRAXIS - CONVERSION BOTTOM BRACKET FOR SHIMANO ROADThis Conversion BB is for installing a Shimano Hollowtech II steel spindle crank in either BB30/PF30 road frame or older Specialized OSBB road frame. This bottom bracket is made of lightweight and durable aluminum with long lasting sealed cartridge...

VIP NOTE - You are required to use proper bearing installation/removal tools to pull/press new bearings into a Praxis M30 bottom bracket. Failing to use correct tools can and will damage your new bearings and/or your BB and void your warranty.- We highly suggest using Enduro’s bearing removal/pres...

PRAXIS - CRANK PARTS

PRAXIS - CRANK PROTECTOR BOOTSProtective boots for Praxis carbon cranks, available in three sizes. It is important to measure the end of your specific carbon crank arm to make sure you get the correct boot. Use this Boot Measuring Guide.TP-2001 Boot 1:- G1 Girder carbon- Brose carbon eCrank- Special...

PRAXIS - CADET HD G2 M30 DIRECT MOUNT MTB CRANKSETThe PRAXIS 9™ - Made for the gravity riders and the long travel hero. Just one look at the 9 and you know it's made for purpose.USE: MTN crankset designed for gravity use on 83mm BSA / PF104.5 / PF107 frames.BUY THIS IF: You are looking for a versi...

PRAXIS - GIRDER G2 CARBON M30 DIRECT MOUNTGen 2 - New Shape, New Generation, New Beginning. With an updated carbon shape and spacing, the new Gen2 Girder Carbon aims to be the new trail master. Offering top level performance, finish, and fitment with lightweight carbon arms, rigid M30 spindle and up...

PRAXIS - GIRDER G2 HD CARBON M30 DIRECT MOUNTNew generation, new shape, new beginning. With an updated carbon shape, spacing and a heavy duty (HD) option, the new Gen2 Girder Carbon aims to be the new trail master. Made for riders who expect top level performance, finish and fitment. With shapely ca...

TECH C.R.A.F.T. Cabon Mfg.

PRAXIS - LEVATIME II SPIDER & RING KITSLevaTime II is Praxis' new generation of shifting technology. Updating to a new, stiffer LT2 5mm big ring allowed their engineers to increase the amount and type of shift features they could forge into the ring. It also allowed Praxis to use their new fast enga...

PRAXIS - LYFT G2 CARBON M30-THRU DIRECT MOUNTCreated as the ultimate mountain Trail / XC crank, the carbon LYFT sits atop as the king. With its super light carbon arms, M30-THRU alloy spindle with alloy preload adjuster the LYFT is our premier Trail/XC crank for those that want the very best.CRANK:...

PRAXIS - M30 WRENCH TOOL- M30 WRENCH – FOR PRAXIS M30 BOTTOM BRACKETS ONLY.- This is NOT a tool for our Shimano/SRAM/Campy Conversion BB- Only for use with Praxis M30/M30 THRU BSA, M30 BB30/PF30- INSTRUCTIONS HERE

NOTE! Must use a ‘CLUTCH’ type rear derailleur. Ex: Shimano Shadow or SRAM Type2GUIDE -In rough terrain, or just for pure security, we still recommend use of an upper guide