City Honda Manawatu 189 views Claim this Business♡

The Pinlock 70 lens is the result of two decades of fine tuning to create the perfect anti-fog lens for daily motorcycle commutes and weekend rides. The Pinlock® lens is made to enjoy a fog-free ride. It is based on two key principles to ensure fog-free vision: the moisture absorbing surface of the...

Fog City is the original anti-fog visor film insert for motorcycle helmet face shields. Install it inside the helmet visor, and eliminate fogging for good! The anti-fog properties do not wear out and the product will last the life of the face shield with simple care and cleaning.Fits pinned and non-...

Replacement inner liner for HJC - RPHA60 Adventure HelmetRefresh your HJC RPHA 60 Adventure Helmet with replacement crown padding / inner lining.- 7mm fits Small and 2XL helmet- 9mm fits Medium and Large helmet- 12mm fits XL helmet

Scratch-resistant shield compatible with the K7 helmet. Colour: Iridium Silver. PINLOCK® 120 MaxVision™ lens ready.Features:- 190° horizontal field of view- Anti-scratch- Daytime use only- ECE 2206 homologated- Max Pinlock not included- Max Pinlock ready- UV protective

Scratch-resistant shield compatible with the K7 helmet. Colour: Iridium Gold. PINLOCK® 120 MaxVision™ lens ready.Features:- 190° horizontal field of view- Anti-scratch- Daytime use only- ECE 2206 homologated- Max Pinlock not included- Max Pinlock ready- UV protective

Scratch-resistant shield compatible with the K7 helmet. Colour: Iridium Blue. PINLOCK® 120 MaxVision™ lens ready.Features:- 190° horizontal field of view- Anti-scratch- Daytime use only- ECE 2206 homologated- Max Pinlock not included- Max Pinlock ready- UV protective

Scratch-resistant shield compatible with the K7 helmet. Colour: Smoke 80%. PINLOCK® 120 MaxVision™ lens ready.Features:- 190° horizontal field of view- Anti-scratch- Daytime use only- ECE 2206 homologated- Max Pinlock not included- Max Pinlock ready- UV protective

Scratch-resistant shield compatible with the K7 helmet. Colour: Clear. PINLOCK® 120 MaxVision™ lens ready.Features:- 190° horizontal field of view- Anti-scratch- Daytime use only (Only for Smoke 50% visor)- ECE 2206 homologated- Max Pinlock not included- Max Pinlock ready- UV protective

Fog-resistant Pinlock® 120 MaxVision™ lens compatible with AGV K7 helmets.

The Pinlock 120XLT lens is the premium solution for anti-fog performance from the racetrack to the road. Containing the same material components as used in MotoGP and Formula 1, the Pinlock 120XLT will keep you focused in even the toughest riding conditions. The addition of MaxVision™ offers wide-...

S-M7 Cast Visor Blue/Pink/Yellow Fluoro Gloss

Replacement visor for the Leatt Moto 9.5 V23 Carbon helmet.

LS2 REPLACEMENT VISOR TO SUIT FF327 CHALLENGER HELMETCOLOUR: IRIDIUM BLUE

When you're riding, you DON'T want to damage your hearing with the constant roar of the wind whipping under and over your helmet.You DO however want to hear the things that make for a safe and enjoyable ride. your engine note, vehicles around you, sirens, alarms and the sounds of other people going...

The essential Oxford Lidsack is a lined helmet carrier.Features:- Made from tough, water-resistant, protective fabric.- Carry handles.- Easy access front pocket.- Size: 33cm (H) x 40cm (W) x 34cm (H)

Genuine ventilation vents for Leatt 7.5 ADV Helmets.Genuine ventilation vents for Leatt 7.5 ADV Helmets.

Aesthetically vintage and optically precise, our highly scratch-and impact-resistant polycarbonate bubble visors fit helmets with three snaps across the brow, and come in a number of colours and reflective coatings.Features:- Injection-molded scratch- and impact-resistant polycarbonate thermoplastic...

Take care of that lid! Our new EXFIL Helmet Bag is designed to wrap your prized helmet in a protective fleece-lined interior layer with a durable ballistic nylon outside. Thoughtful design includes a ruggedized rubber bottom, hanging loop and mesh panel for ventilation.Features:- Fits all Biltwell h...

MT-V-14 visor for the MT Targo, Blade 2, Rapide and Revenge 2 helmets.

Genuine replacement vent for LS2 Helmets. Easy to remove/replace.

Genuine replacement vent for LS2 Helmets. Easy to remove/replace.

SP1 scratch resistant, Max Pinlock ready visor. Compatible with: AGV K6 helmets.Features:- 100% polycarbonate- 190° horizontal field of view- 4mm thickness- 85° vertical field of view- Anti-scratch- Max Pinlock not included- Max Pinlock ready- Optic class 1- UV protective

The Troy Lee Designs Premium Black Helmet Bag is a sleek and durable carrying case designed to protect your helmet during transportation and storage. The bag features a soft fleece lining to prevent scratches, a sturdy handle for easy carrying, and a ventilated mesh panel to promote airflow and prev...

The ultimate anti-fog solution for a crystal-clear view in any conditions. Designed specifically for the LS2 FF805 helmet, this Pinlock® insert is larger than the standard foil, ensuring complete coverage across the entire eye port. It’s fully removable, interchangeable, and simple to install, of...