Dkm Fabrication 1 views Claim this Business♡

1UZ exhaust manifold flanges, laser cut in 10mm mild steel.Designed for creating your own custom manifold for the Toyota/Lexus quad-cam V8 - perhaps needed during an engine conversion. Once you've finished welding your pipe-pieces onto the flange you will need to use a linisher to create a perfectly...

This steel sump-guard / skid plate is made from 3mm steel and fits the KE70 Toyota Corolla chassis. This product was designed predominantly for those doing a Beams engine conversion, as the taller engine means the sump sits close to the road.Protect your engine with this bash-plate, made to bolt up ...

K24 (Honda) exhaust manifold flange, laser cut in 12mm mild steel.Designed for creating your own custom manifold - perhaps you're adding a turbo to your engine or required different clearance than standard during a K-series motor conversion.Once you've finished welding your pipe-pieces onto the flan...

Aluminium Alignment Toe Plates (pair) cut in 3mm aluminium, ideal for your drift or track car set-up.This pack is perfect for adjusting your vehicle's toe either at home or at the racetrack. The plates are a raw alloy finish and comes with 2x tape measures.We can also manufacture these with customis...

Add some personalisation under the hood of your Nissan Silvia or other SR-powered car with our coil-pack cover.Available in both non-VCT and VCT configurations, you can choose from any of our current options or we can create you a custom design (some people request their personalised plate on the co...

These internal rear-quarter panels are a great way to help seal the interior of your S14 Silvia when stripping down for a race or drift car, especially if you need to clearance your guards to allow for over-fenders / widebody.They come as a pair (L R) panels to be fitted behind the b-pillar, below t...

These foot/heel plates are suitable for a Nissan S14 floorpan and are for motorsport vehicles only. Cut in 2mm aluminium and dimple-die pressed as pictured, these Nissan Silvia footplates are suitable for drift, race or rally cars as a heel rest, & also to prevent passenger's shoes melting when you ...

Complete the look of your drift car's interior with this pair of quality door cards. Removing your car's interior is common when building a race or drift car, but these aluminium doorcards can help add back for a more finished feel.Cut and folded in 2mm alloy to be lightweight and durable, they have...

Complete the look of your drift car's interior with this pair of quality door cards. Removing your car's interior is common when building a race or drift car, but this aluminium door card replacement can help add back for a more finished feel.Cut and folded in 2mm alloy to be lightweight and durable...

Complete the look of your drift car's interior with this pair of quality door cards. Removing your car's interior is common when building a race or drift car, but this aluminium door card replacement can help add back for a more finished feel.Cut and folded in 2mm alloy to be lightweight and durable...

Securely mount your motorsport battery with our slimline battery box. Laser-cut in 5052 aluminium & including M8 bolts this option makes a lightweight and secure housing for your battery. Perfect for racecars and other high-performance vehicles.Suits slimline batteries such as Odyssey PC680MJT, Vert...

LS exhaust manifold flanges, laser cut in 10mm mild steel.Designed for creating your own custom manifold for a Holden LS V8 engine LS1, LS2, LS3 (5.7L 6.0L 6.2L) - perhaps needed during an engine conversion. Once you've finished welding your pipe-pieces onto the flange you will need to use a linishe...

Ensure you pass tech inspection and reduce the smoke coming in the cabin of your track-spec Nissan S14 Silvia with this laser-cut parcel shelf 'delete' panel.If you've removed interior trims for a drift or race-car, you will need to seal off the cabin from the fuel cell for safety. This 1.2mm lightw...

Upgrade your BMW drift car's steering lock with this pair of extended lower control arms, increase maneuverability and enhance your drifting experience with this easy-to-install upgrade.These will be purchased brand new (so come with new ball joints), and extended to your preference. We have E30 and...

Stainless Steel M18 x 1.5 O2 Oxygen Sensor Bung Mounting Bungs And Plugs Adapter With Notched Style Mounting Nut (suit welding to tube)

Exhaust manifold flanges for the 2UZ 3UZ engine, laser cut in 8mm mild steel.Designed for creating your own custom manifold for the later model Toyota/Lexus quad-cam V8 - perhaps needed during an engine conversion.Once you've finished welding your pipe-pieces onto the flange you will need to use a l...

Increase your drift car's steering capabilities with our S14/S15 modified knuckles (sold as pairs) These custom steering knuckles (sold as pairs) provide extra lock for better control on the track. Please note, these knuckles are designed for drift use only and are not suitable for streetcars. Upgrade your drift game today.

Ensure you pass tech inspection and reduce the smoke coming in the cabin of your track-spec Nissan S14 Silvia with this laser-cut rear firewall, or backseat 'delete' panel.If you've removed interior trims for a drift or race-car, you will need to seal off the cabin from the fuel cell for safety. Thi...

Suitable for drift car replacement, brand new windscreen, laminated glass with grey band. 1445mm wide, 800mm high in the centre.You will need urathane sealant to fit this, and a suitable vehicle to collect as this item is PICK UP ONLY

Complete the look of your drift car's interior with this pair of quality door cards. Removing your car's interior is common when building a race or drift car, but an aluminium inner door skin can help add back for a more finished feel.Cut and folded in 2mm alloy to be lightweight and durable, they h...