Dkm Fabrication 9 views Claim this Business♡

Franklin Performance male AN weld-on adaptors.Sizes available:- 3AN- 4AN- 6AN- 8AN- 10AN- 12AN- 16AN- 20ANMaterial options available:- 6061-T6 Aluminium- 304 Stainless Steel- Mild SteelCNC machined at our factory in Napier, New Zealand.

Rotary shaped oil cap and aluminium weld-on boss. Great for making custom catch cans, dry sump tanks, overflow bottles.Both parts are CNC machined from billet 6061-T6 aluminium at our factory here in NZ.Boss sits 15mm high, and has a 38mm diameter x 3mm long spigot on the bottom to locate into the t...

Injector bungs set to block off injector ports in Mazda 12A & 13B centre plates and Mazda RX8 13B centre plates.To fit, the injector bung body is inserted into the injector port and screw tightened to lock the bung in place. They are able to be removed at any time.The two aluminium bodies are CN...

Franklin Performance is proud to manufacture billet aluminium oil filler necks and caps for Mazda rotary engines.CNC Machined from high quality 6061 aluminium and black anodised for great looks and corrosion resistance, these oil filler tubes and caps replace the standard metal filler and plastic ca...

High quality crimping tool for non-insulated terminals.Designed for 0.5-2.5mm cable size.Suitable for crimping the Nissan coil connectors and Toyota TPS connectors we sell.

Pack of 100 Conta-Clip terminal blocks to suit 35mm DIN rail.Gr.C 750V~4mm²AWG No. 22 To 10IA392C.102.934UEEx e II1001.2Part Number : RK 2,5-4 / RK 254 / RK-2,5-4 / 1001.2We have packs of end caps, rail clamps and fuse holders also available. Please check our other industrial listings.

Anodised aluminium banjo fitting for use on clutch and brake lines.Size: 3ANHole Size: 10.2mm

FranklinPerformance is proud to manufacture billet aluminium oil filler necks and caps for Mazda rotary engines.CNC Machined from high quality 6061 aluminium and black anodised for great looks and corrosion resistance, these oil filler tubes and caps replace the standard metal filler and plastic cap...

Electric water pump adaptor to suit Mazda 12A, 13B and 20B rotary engines.CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand and then black anodised for corrosion resistance and great looks.Supplied with fasteners required and plug for the temperature sender port.The EW...

This is a bypass block designed to eliminate the oil filter and housing on Mazda Rotary engines.Removing the oil filter and housing and installing a remotely mounted oil filter in the oil cooler lines provides a cleaner looking engine bay, for dry sump applications, and for custom applications allow...

Brand new 4-pin loom plug to suit Toyota 1JZ-GTE and 2JZ-GTE 4 pin TPS units.  Please check your original connectors shape and keying before purchasing.Crimping tool is also available, please look at our other listings.We are a direct importer so can offer these at a great price. Wholesale inqui...

CNC machined from high quality materials multi- v pulleys will give your engine bay a sleek, modern look while improving belt grip over the standard V-belt setup.Billet 103mm aluminium water pump pulleySuits 12A, 13B & 20B Engines(20B requires FC series water pump)Alternator, crank and sets of pulle...

Italian made 'Faster' hydraulic couplings.35Mpa working pressure.Flat face, dry-break connection.1/4" BSP threadISO 16028 interchangeFor more information please visit: http://www.fastercouplings.com/product-detail/ffh-3Sold as a set of 1x male and 1x female connector. Approx 20 sets available.

1/4" NPT turbo oil feed adaptor with 40mm bolt hole centres.CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand, and anodised black for great looks and corrosion resistance.

Lightweight alternator pulley made from aircraft-grade 6061-T6 aluminium for light weight, and black anodised for great looks.Offers faster acceleration through significant reduction of mass having to be accelerated by the crankshaft. The effect is similar to a lighter flywheel, and the car feels mo...

Multi-V pulleys will give your engine bay a sleek, modern look while improving belt grip over the standard V-belt setup.6PK crank pulley, 121mm outside diameterMachined from billet 6061 aluminium at our factory in Napier, New ZealandSuits 12A, 13B & 20B Engines(20B requires FC series water pump)Alte...

Lightweight crank pulley made from aircraft-grade 6061-T6 aluminium for light weight, and black anodised for great looks.Offers faster acceleration through significant reduction of mass having to be accelerated by the crankshaft. The effect is similar to a lighter flywheel, and the car feels more li...

Lightweight water pump pulley made from aircraft-grade 6061-T6 aluminium for light weight, and black anodised for great looks.Offers faster acceleration through significant reduction of mass having to be accelerated by the crankshaft. The effect is similar to a lighter flywheel, and the car feels mo...

Lightweight pulley set made from aircraft-grade 6061-T6 aluminium for light weight, and black anodised for great looks.Set contains: crank pulley, alternator pulley and waterpump pulley.Offers faster acceleration through significant reduction of mass having to be accelerated by the crankshaft. The e...

CNC machined from high quality materials this pulley set will give your engine bay a sleek, modern look while improving belt grip over the standard V-belt setup.Set includes:Billet 121mm aluminium crank pulleyBillet 103mm aluminium water pump pulleySteel 56mm alternator pulley with 17mm boreSuits 12...

Multi- v pulleys will give your engine bay a sleek, modern look while improving belt grip over the standard V-belt setup.Steel construction with black oxide finish56mm alternator pulley with 17mm boreSuits 12A, 13B & 20B Engines(20B requires FC series water pump)Crank, water pump and sets of pulleys...

Franklin Performance is proud to design and manufacture this custom dipstick compatible with Mazda 12A & 13B rotary engines.Designed to improve the appearance of your engine bay.Supplied assembled with o-rings and stainless steel dipstick.Fitment:- 13B engines - The dipstick fits into a sleeve attac...

8AN O-Ring to 6AN8AN O-Ring to 8AN8AN O-Ring to 10AN10AN O-Ring to 10ANCNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand.Available in our standard range of seven anodised colours.

Aluminium double belt alternator pulley to suit early 12A and 13B rotaries through to series 5 RX-7 (vehicles with 15 mm alternator shaft).It allows a second v-belt to be added for improved reliability, particularly on high-revving engines.Key benefits: Eliminates belt slip on the alternator/water p...