HIPS (Support filament) 1kg

High Impact Polystyrene (HIPS) is a dissolvable support material commonly used with ABS and ASA. It can be dissolved in d-Limonene, leaving your print free from marks caused by support removal.

An enclosed chamber is recommended to prevent warping while printing.

Air filtering and/or ventilation is required

Material: HIPS
Diameter: 1.75mm
Weight: 1kg / pack

Recommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 220°C - 240°C Heated Bed Temp 90-100°C Printing Speed 40~60 mm/s

Technical Data Sheet (TDS)

https://3dshop.co.nz/content/HIPS TDS-EN.pdf