Enerdrive EN3DC100 12V 100A DC-DC Battery Charger with MPPT Solar and Alternator Inputs

The a dual-input 12V DC charger providing up to 100A alternator charging and up to 80A MPPT solar charging to a single house battery bank. Features

- Model:
- System voltage: 12V DC nominal output
- Maximum output current: 100A DC charger output
- Adjustable output: selectable from 10A to 100A in 10A increments
- Charging stages: 4-stage charging – Test, Bulk, Absorption, Float
- Equalise function: equalise voltage 15.5V (Flooded batteries only), equalise current 10% of Bulk setting
- Output bank: 1 house battery bank
- Compatible battery types: Gel, AGM, Flooded, Lithium, Program (equalisation for Flooded only)
- Bulk voltage range: 13.8–14.8V DC
- Float voltage range: 13.0–13.8V DC
- Efficiency: >95% charger efficiency
- Minimum house battery voltage: 8.0V DC
- Standby draw (unit ON): 12.7V DC
- Suitable alternators: high-output 12V alternators approximately 180A or higher (check vehicle documentation)
- Cooling: forced air ventilation (fan cooled)
- Ingress protection: IP32 rated
- Operating temperature range: -20°C to 40°C
- Storage temperature range: -40°C to 70°C
- Remote display: included backlit LCD display, 100 x 100mm, 0.4kg
- Remote display communication: CANBUS
- Remote display connection: RJ12 port
- Battery temperature sensor port: RJ12 (optional sensor)
- Protections: reverse battery, short circuit, over charge, over temperature
- Dimensions (charger): 356 x 205 x 97mm
- Weight (charger): 3.23kg
- Weight (remote display): 0.4kg
- Warranty: 5 years (manufacturer conditions apply)
- Typical applications: large 4WDs, utes, trucks, caravans, motorhomes, and marine systems with suitable high-output alternators
- Recommended accessories: Enerdrive solar panels, Enerdrive or compatible lithium and AGM house batteries, Enerdrive battery temperature sensor, Enerdrive or compatible battery monitors