formtech Claim this Business♡

Pump more power into your 3D printer with a high power density 50W heater cartridge.Available in 24V and 12V variations with different connector options. Select to the right.24V - no connectors:- Hardcore 321SS cartridge improves longevity and durability- 22 mm long- Diameter sized to fit into a 6 m...

Mounts directly to the top of The Mosquito Hotend™/Mosquito Magnum™ heat sinkSimple to install and configureMachined aluminum componentIncludes:Groove mount adapterMounting screws

High quality 25 mm box fan with dual Japanese bearings3.64 CFMGenuine Molex Micro-Fit 3.0 connectorMounts directly to the standard Mosquito™ Hotend or Mosquito™ Magnum hotend with included hardwareAvailable in 12V or 24V configurations1 m extension cable available

1 m long extension cableMolex Micro-Fit 3.0 connector (female end)- JST RE-02 connector (male end)

Mounts directly to the top of the Mosquito™/Mosquito Magnum™ hotend heat sinkSimple to install and configureMachined steel componentsIncludes:M6x1.0 machined threaded stemM6x1.0 nut with captive washerMounting screws- Made in USA

Got a sticky nozzle? Sick of plastic sticking to it all the time? Plastic Repellent Paint™ by Slice Engineering® is the solution for you!Plastic Repellent Paint™ is a revolutionary, water-based, PTFE nanosuspension that repels plastic from the outside of your nozzle and hot block. Which is awes...

Thermal paste for improving conductionActs as a release agentUnlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistorUse the included applicator to coat the cartridge heater hole in your 3d printer heat b...

Eliminates the need for high temperature RTD's or having two separate thermistors to maintain accuracy at both the low and high end of the temperature spectrumThese are simply the highest performing thermistors on the market15 mm long. 3 mm diameter, the de facto standard for sleeved thermistorsEach...

500deg rated PT1000 slice engineering temp sensor These are to replace the stock 450deg thermistor Pt1000 Resistance Temperature Detector (RTD) uses a platinum resistor for the ultimate in temperature sensing performance. Works with Duet 3 and other high amperage boards out of the box. Perfect for a...

Standard Pack - 0.2 / 0.3 / 0.4 / 0.5 / 0.6 mm nozzlesSupersized Pack - 0.8 / 1.0 / 1.2 / 1.4 / 1.8 mm nozzles- Multiple variations available- Forgot what size nozzle you have installed? With a Slice Engineering® nozzle you don't need to know braille, or read a chart, the orifice size is engraved o...

Wet 3D printing filament can cause all sorts of issues. In fact, many of the issues that hotends or nozzles get blamed for can actually be traced back to filament that has absorbed too much moisture. Our facility is located in humid Florida, so we set out to find an easy way to keep the humidity fro...

New Zealand meet the DRYWISE filament dryer.Pre Order 1.75mm Drywise unit now for delivery in 8 days, purchase your start to dry filament today. Pre order is now available 2.85 machines as well. Included in the box:- Drywise unit complete ready to run- Parts, O-rings and fittings spare- 2 descant dr...

Compatible with all Slice nozzles. E3D and Bondtech nozzles and can be tightened with an adapter and socket.- Specifically designed for changing nozzles- 1.5 Nm torque provides correct seal to prevent leaking plastic- Perfect tool for one-handed nozzle change when paired with The Mosquito Hotend™-...

The Drywise Pre-Heater add-on is designed and built for use in combination with Drywise Inline Filament Dryer.The add-on is essential for reliable and consistent drying of specific material types prior to drying.These materials include carbon and glass fiber filled materials and other specific mater...