3DXMAX® ASA

(Acrylonitirle Styrene Acrylate) is a UV-resistant weatherable polymer.

Our ASA has a low-gloss matte finish that makes it a perfect filament for technical prints - especially when you don't want the high-gloss surface finish often associated with many other 3D printing materials such as ABS, PETG, or PLA.

ASA's UV-stability makes it an ideal material for outdoor applications that will experience intense exposure to the sun and weather.

ASA's exceptional mechanical and thermal properties - coupled with excellent UV-stability - is why this resin is used the Auto, Marine, and RV industries for exterior applications such as mirror housings, cowl covers, radiator grills, and sensor housings.

UV-Stable Low-gloss = Great Looking Technical Parts!

The colour range we stock in New Zealand is as per the 5 colours you see in the selection, BUT we can pick and mix if you are ordering 5 rolls and I can get whats in the picture below if you need from the USA.

Diameter Specifications:

- 1.75mm /- 0.05mm

Recommended Print Conditions:

- Extruder Temp: 235 - 255°C
- Bed Temp: 90-110°C, cool the bed down by about 10-20°C after the first couple of layers
- Bed Prep: Magigoo Original 50ml/120ml
- Enclosure: We recommend using a printer with an enclosure to help keep some heat in while printing with ASA
- Support: Our Aquatek water soluble support works great to create complex parts.
- Drying Instructions: Please see the following instructions for when you want to dry out this filament.