Get Electronic 190 views   2 clicks Claim this Business

Automotive Electronics Repair service and Parts supplier to New Zealand
1 to 15
×
  • $975 +
    Scan Tool Power connector replacement
    Some shops may be tempted to replace the power socket themselves; however, let the experts do it!
    Buy from Store 0 0
  •   +
    Elektroblock Repair
    We can fix your Elektroblock caravan charger with the following issues: - Not charging- Intermittent operationIf you have one of these units that are faulty, we can take a look and fix any issues you may have.
    Visit Store 0 0
  • $862.50 +
    Opticom Assist HMI panel repair
    We can repair your Opticom Assist HMI panel with the following issues: - Buttons not working- Incorrect button presses detectedWe carry parts in stock for this repair for speedy turnaround. This repair carries a 1 year warranty.We can also repair other HMI units with button faults, Please for more details on this repair service.
    Buy from Store 0 0
  • $546.25 +
    Allight Light Tower Controller repair
    We can repair your Allight light tower controller that may have the following issues: - LEDs not working- Buttons not working- Intermittent operation- Liquid ingress- Any other issues you may haveOur repair service carries a 1 year warranty. Price is indicative only and may vary depending on the fault. We will assess your unit and give you a price to repair before commencing repair.
    Buy from Store 0 0
  • $776.25 +
    G-Scan 2 Scan Tool Touchscreen Repair
    We can fix the following issues with these scan tools: - Not accepting touch input- Intermittent touch operation- Unit registers "ghost" touchesCost to repair is $675 excl ($776.25 incl). This repair comes with a one year warranty. We have replacement parts in stock and we can quickly get these units repaired and back to your workshop.
    Buy from Store 0 0
  • $750 +
    All Sun EM155A 50MHZ 200MSa/S 3in1 Professional Portable Digital Oscilloscope+ M…
    DiodeBuzzer beeps if the forward voltage drop of the diode is< 0.25V.
    Buy from Store 0 0
  • $227.70 +
    Hantek CC650 20KHz 650A Oscilloscope Multimeter AC/DC Current Clamp with BNC Connector
    Efficient Measure Range:1mV/100mA: 100mA to 20A , Multimeter Range is set to DC or rms AC 200mV1mV/1A: 1A to 200A, Multimeter Range is set to DC or rms AC 200mV; 200A to 650A, DC or rms AC 2VDC Current Accuracy: 0 to 650A , /(3% reading 2A )AC Current Accuracy: 50Hz arrive at 400HzCaptured Conductor...
    Buy from Store 0 0
  • $227.70 +
    Hantek CC65 Digital AC/DC Current Clamp Meter Multimeter Oscilloscope with BNC Connector
    Output Supplied with coil cable with straight banana plug or BNC plug.
    Buy from Store 0 0
  • $550 +
    Hantek 2C42 Handheld Oscilloscope Multimeter
    2 in 1 Dual Channel Oscilloscope Multimeter 250M Sampling rate, 40MHZ Bandwidth.10MV-10V Vertical resolutionMinimalist keyboard design simplify operation,easy to useAuto automatic measuring functionKey tone settingsColor highlight LCD screen,legible even in bright sunlighAdjustable backlight brigh...
    Buy from Store 0 0
  • $97.75 +
    Smart Multimeter ADMS7
    Small lightweight multi-meter, ideal for a variety of electronics testing and diagnostics.Display: 6000 countsDC Voltage: 600V ±(0.8% 3)AC Voltage: 600V ±(1.2% 5)Resistance: 6000Ω ±(1.2% 3)Frequency: 1000Hz ±(1.0% 5)V-Alert(non-contact voltage detection):Low-range : The buzzer sounds a slow ala...
    Buy from Store 0 0
  •   +
    Elektroblock Repair
    We can fix your Elektroblock caravan charger with the following issues: - Not charging- Intermittent operationIf you have one of these units that are faulty, we can take a look and fix any issues you may have.
    Visit Store 0 0
  • $776.25 +
    G-Scan 2 Scan Tool Touchscreen Repair
    We can fix the following issues with these scan tools: - Not accepting touch input- Intermittent touch operation- Unit registers "ghost" touchesCost to repair is $675 excl ($776.25 incl). This repair comes with a one year warranty. We have replacement parts in stock and we can quickly get these units repaired and back to your workshop.
    Buy from Store 0 0
  • $862.50 +
    Opticom Assist HMI panel repair
    We can repair your Opticom Assist HMI panel with the following issues: - Buttons not working - Incorrect button presses detectedWe carry parts in stock for this repair for speedy turnaround. This repair carries a 1 year warranty.We can also repair other HMI units with button faults, Please for more details on this repair service.
    Buy from Store 0 0
  • $546.25 +
    Allight Light Tower Controller repair
    We can repair your Allight light tower controller that may have the following issues: - LEDs not working - Buttons not working- Intermittent operation- Liquid ingress- Any other issues you may haveOur repair service carries a 1 year warranty. Price is indicative only and may vary depending on the fault. We will assess your unit and give you a price to repair before commencing repair.
    Buy from Store 0 0
×