Hi Lift True Colour Technical Guide and Colour Chart Only

PLEASE USE THIS AS A GUIDE ONLY!
HAIRWORKS DOES NOT ACCEPT RESPONSIBILTY FOR ANY RESULTS AND/OR DAMAGE OCCURING FROM PURCHASE AND USE OF THESE PRODUCTS.
-ALWAYS READ MANUFACTURERS INSTRUCTIONS.
-ALWAYS DO A SKIN TEST EVERY TIME BEFORE YOU COLOUR YOUR HAIR!

Reflect Key:

The second number indicates the primary colour reflect and the third number indicated the secondary colour reflect of the shade.

00 Intense

0 Nautural

1 Ash

2 Violet

3 Golden

23 Beige

4 Copper

5 Mahogany

6 Red

7 Fashion Reds

8 Pearl

For Example 7.12

7= Blonde 1= Ash 2= Violet

Permanent Creme Colour:

Mix well to obtain a smooth consistency in a non-metallic bowl, apply to dry hair.

Mixing Ratio - 1:1.5

Processing time - 30-45 minutes

Semi/Demi Colouring:

Mix well to obtain a smooth consistency in a non-metallic bowl, apply to shampooed, towel dried hair.

Mixing Ratio - 1:2

Processing time - 20-30 minutes

Ice & Violet Blonde:

Can be used as a permanent tint or for toning to eliminate unwanted yellow/brassy tones.

Tint mixing ratio - 1:1.5 Lifts up to 4 levels

Processing time - 30-45 minutes

Toning mixing ratio - 1:2

Processing time - Visual up to 30 minutes

Classic Blonde:

Can be used as a permanent tint or toning to eliminate unwanted yellow/brassy tones.

Tint mixing ratio - 1:2 Lifts up to 4 levels

Processing time - 45-60 minutes

Toning mixing ratio - 1:2

Processing time - Visual upto 30 minutes

Artic Blonde:

Tint mixing ratio - 1:2 Lifts up to 4 levels

Processing time - 45-60 minutes

Toners:

Eliminate unwanted yellow/brassy tones.

Mixing ratio - 1:2

Processing time - Visual up to 30 minutes

Intensifiers:

Designed to enhance reflect or intensity tone to your colour selection. No extra peroxide required, do not exceed 30ml per 100ml of tint.

Corrector:

Designed with counter-acting properties, enhancing reflect or intensifying tone. No extra peroxide is required, do not exceed 30ml per 100ml of tint.

Meches - Lift & Deposit:

A lift and deposit system, creating vibrant reflects in one application. Recommended on level 2-6 natural bases with little colour build up.

Mix well to obtain a smooth consistency in a non-metallic bowl, apply to dry hair.

Mixing Ratio - 1:1.5

Processing time - 15 minutes with heat or 30 minutes without heat.

Neutral 000:

Can be mixed with the Classic & arctic Blonde Series or any True Colour shade in equal parts to increase lift capability by one level.

Tint mixing ratio - 1:1.5

Classic & Artic Blonde mixing ratio - 1:2