HJ PHILLIPS 33 views ♡

MDR08 - • Remove fasteners that secure panels and trim pieces without damage to panel or trim. • Distinct pivot points are design for appropriate leverage and to resist twisting that may damage panel or trim piece. • Ergonomically designed bi-material handle for easy use. • Hole in the handl...

218011 - Heavy Duty Staple Gun • TUV/GS certified. • Use with 4-14mm staples. • Supplied with 600pc staples - (200 heavy duty 200 U shape 200 brad nails) Replacement HD 10mm Staples available - Code 218105 (1000pc)

TQAG - Teng 1/2 Drive Angular Gauge For angle controlled bolt/screw tightening with static read-off point. Read-off possible from any angle thanks to a pair of angled scales. Removable magnet for attaching sockets with 1/2 internal square drive. Drive: 1/2 Dimensions: 420(L) x 80(W) x 66.5mm(H)

SSH01 - Safety Wire Lanyard Safety wire for securing tools when working at heights. Locking wire with swivel spring hooks and 3mm plastic covered stainless steel spiral wire. • Max Load: 3.0kg • Length (Stretchable): 430-1600mm • Weight: 68gm

NS02 2 Piece Nut Splitter Set 2 individual nut splitters with capacities of 5 to 20mm and 14 to 27mm.

MD-SCR Scraper 22mm blade for easy removal of gasket residue. With Mega Drive handle for more comfortable grip (overall length 245mm).

REVOLVING PUNCH PLIER Professional quality pliers these are made from heavy gauge pressed steel sheet. Punches are accurately heat treated for extended life and are exposed to a brass anvil which prevents the edges from getting damaged in use. Each punch locates exactly in position locking in place...

Groz Dcc2H Dead Centre Carbon Steel Tip

BWT406 - Telescopic Basin Tap Wrench A basin tap wrench for reaching behind the sink or bath. A spring loaded serrated jaw quickly grips on nuts and pipes. between 12-32mm. A telescopic handle for even easier access in difficult to reach places giving an overall length of between 275 and 400mm.

AT415 - Bodywork Dollie Individual dollie for body work. • Shape: Curved • Length: 128mm • Width: 58mm • Height: 40mm • Net Weight: 1.1kg

AT420 - Bodywork Dollie Individual dollie for body work. • Shape: Heel • Length: 80mm • Width: 60mm • Height: 30mm • Net Weight: 900g

AT330 - Disc Pad Brake Puller Hooks on to brake pad. With sliding hammer for easy removal. • Pin diameter: 5mm • Length: 175-265mm

AT192 - Ball Joint Separator Tools for separation of ball joints. • Opening: 40mm • Adjustable Height: 80mm • Weight: 1.65kg

AT186 - Ball Joint Separator Tools for separation of ball joints. • Opening: 18mm • Adjustable Height: 38mm • Weight: 330g

AT170 - Brake Parallel Pin Punch • 5.5mm pin punch for removing pins from disc pads. • Length: 165mm

218003 - Light Duty Staple Gun • TUV/GS certified. • Use with light duty 4 6 8mm staples. • Supplied with 100pc staples. Not for commercial use.

AT191 - Ball Joint Separator Tools for separation of ball joints. • Opening: 29mm • Adjustable Height: 60mm • Weight: 920g

FC01 - Teng Tools Fender Cover Protective wing cover with full length magnetic strip measures 400mm x 1010mm. Heavy duty red PVC front complete with the Teng eyes and cloth back.

GROZ WRIGGLER / CENTER FINDER Wiggler/Center finder with its four interchangeable attachments is a versatile tool that finds application in many places The attachments can be snapped onto the chuck without removing the collet nut and are clamped by a ball swivel joint which permits adjustment to an...

GZ03601 - GROZ 7PC ENGINEER S TOOL SET Set Includes: Engineer s Precision Square - 4in (100 mm) Jenny Caliper - 6in (150 mm) Steel Rule - 6in (150 mm) Double Ended Scriber - 7-1/2in (190 mm) Centre Punch - 5/32 in (4 mm) Adjustable Tab & Reamer Wrench (DIN1814) Spring Divider - 4in (100 mm) Handy an...

• Manufactured from Stainless Steel. • Tweezers make use of two levers connected at one fixed end called the fulcrum with pincers at the other. Set Consists of 3 Industrial And 3 Utility Type Tweezers. Industrial Tweezers: Point Type: Strong Sharp Length: 120mm Point Type: Blunt Serrated Length: 1...

GROZ MANUAL MACHINISTS JACK Manufactured from high grade cast steel the Machinist s Jack has a 1in adjustable screw and tilting swivel head It finds application on drill presses milling machines planers. any place where leveling is necessary Lifting capacity is approximately 1000 lbs (454 kgs) Lowes...

TENG 360MM MECHANICS ADJUSTABLE SEAT Mechanic’s working chair with adjustable seat. Swivel wheels and storage underneath the seat. Adjustable Height - 420-500mm Replacement Wheels: Code TCA06RK