JR Airsail 53 views 1 clicks ♡
-
$231RG812BX XBUS DMSS TELEMETRY RECEIVERXBus compatible Diversity 8channel DMSS receiver w/Hybrid output port availableSelectable Xbus/PWM port output on AUX3Easy BIND system (No binding plug is needed)Based on the proven RG712BX Receiver, JR's new RG812BX not only features an additional 8th channel, but a unique "hybrid port" that allows...Buy from Store 0 0 -
$135JR RA03TL DMSS REMOTE RECEIVERRA03TL (ER031) has RF.ER031 is second receiver.(not Antenna)DMSS Second receiver for 2.4GHz Receiver (Diversity anttena Type)DMSS 2.4GHz Second Receiver "RA03TL"Dimensions 6 x 19.5 x 32mmWire Length Antenna : Coaxial potion/120mm : Antenna potion/25mmWeight 6g· Mounted telemetry transmission module...Buy from Store 0 0 -
$209RG613BX DMSS XBus 6ch ReceiverOverview RG613BX 6CH 2.4GHz DMSS XBus ReceiverThe worlds most advanced 6-channel receiver, now in a hard caseThe new RG613BX 6-channel XBus receiver is based on the previous RG612BX, but is housed in an impact resistant, clear plastic case fordurability.Its difficult to pick just ONE reason why the...Buy from Store 0 0 -
$219JR/DFA XBus Servo/Converter Harness ProgrammerSuitable for adjusting and programing JR/DFA XBus servosBuy from Store 0 0 -
$199JR/DFA S3411 DIGITAL WIDE VOLTAGE XBUS COMPATIBLE SERVOTorque:4.2 (4.8V) /5.3 (6.6V) / 6.6 (7.4V)kg·cmSpeed:0.22 (4.8V) /0.2 (6.6V) / 0.16 (7.4V) Sec/60°Weight:30gS Series Servos - Programmable Wide Voltage XBus compatible servos has been released. JR/DFA is pleased to announce the release of our new XBus S series servos, allowing not only serial serv...Buy from Store 0 0 -
$89JR/DFA S588 WIDE VOLTAGE XBUS PROGRAMMABLE SERVOTorque:5.2 (4.8V)/6.5 (6.6V)/7.7 (7.4V)kg-cmSpeed:0.28 (4.8V)/0.2 (6.6V)/0.19 (7.4V) sec/60°Weight:42g S Series Servos - Programmable Wide Voltage XBus compatible servos has been released. JR/DFA is pleased to announce the release of our new XBus S series servos, allowing not only serial servo conn...Buy from Store 0 0 -
-
-
-
$59.90JR XB1-CPG XBUS ID PROGRAMMERXB1-CPGXBus channel ProgrammerXBus requires individual “ID" for each Servos or XBus converter output.XB1-CPG provides the most simple way to carry it out by wire. #1 Connect Servo or XBus converter harness to the XBus port.#2 Set the both dial to 0/0 and press “SET" to enter setting procedure.#3...Buy from Store 0 0 -
$67.20JR XB1-PH4-250 HEAVY DUTY XBUS HARNESS FOR XBUS SERVOS. 4 SERVO OPERATIONJR - 03692 - XBus XB1-PH4 250mm XBus NX Servo Harness, 4 LeadFor high-current installations with any of our heavy-duty center hubs, such as the XB1-CHB and XB2-CHB, the NX-series servos will require a harness to adapt the heavy-duty 14AWG power leads down to the normal 20AWG wire for the servos to u...Buy from Store 0 0 -
-
$199JR RG812BPX XBUS DMSS TELEMETRY HEAVY DUTY RECEIVERXBus compatible Diversity 8channel DMSS receiver w/Hybrid output port availableAll output terminal to share both PWM or XBus.Deans connector equipped for 16AWG power cable out put from receiver voltage input. - Dimension :14 x 31 x 42.5S3- Weight : 15g- Receiving System : 8 channel DMSS System wit...Buy from Store 0 0 -
$50.48JR XB1-CV1 XBUS CONVERTER HARNESS SINGLE PORTXB1-CV1 XBUS CONVERTER HARNESS SINGLE PORT. Used along with JR's XBus system to enable standard PWM servos to operate via the XBus port.Buy from Store 0 0 -
$66.20JR XB1-CV4 XBUS CONVERTER HARNESS 4 PORTXB1-CV4 XBUS CONVERTER HARNESS FOUR PORT. To enable standard PWM servos to operate on the new JR XBus system. Allows up to four servos to operate from one XB1-CV4 harness from four separate channels.Buy from Store 0 0 -
$529JR PROPO 11BPX PRO HYBRID RX HUB DMSS 2.4GHz XBUS with 2 x RA03TL Receiver(s)11BPX HYBRID RX HUB DMSS 2.4GHz Receiver(s)11BPXDMSS 2.4GHz ReceiverDual RF(03TL X2) Dual Batteries74A FET insideYou can use super high voltage servos(11.1v)Dimension :Weight :Receiving System : 11 channel DMSS System with 3 XBus ports 1 sensor portPWM Output ch : 1ch - 11chOperating Voltage : 6.6V-...Buy from Store 0 0
×