Kiwisparks 167 views   2 clicks Claim this Business♡

Dishwasher temperature sensor, also used in some washing machines & dryers, for the following makes and models:EUROTECH: ED-DWF12PSS, ED-DWF12PWH, ED-ID14PSS, ED-DW14PWH, ED-DW14PSSBAUMATIC: BDW66S, BDWI60, PDW6SL PDW6WEUROMAID: CSDW60SS-5TECHNIKA: TGDW6BK TGDW6SS TSDW14GG TGDW6BK-2BELLINI: BDW127, ...

Dishwasher drain hose for some dishwasher models, 1930mm, angled end, approx 22mm internal diameter each end. Please check size before ordering. Listed for the following models:EUROTECH: ED-DW9P, ED-DW9PSS, ED-ID9P, ED-ID9PSS, ED-DW12PSS, ED-DW12PWH, ED-ID14P, ED-D60CM12PSSEVERDURE, OMEGA: DWF146SC,...

Used PCB, tested OK, 30 day warrantyPCB board for some Robinhood, Parmco & Omega rangehoods. The motor capacitor needs to be swapped from the existing PCB. This board has 2 x 5-pin connection terminals, 2 x 2-pin lamp connections, suitable for models with halogen or 12 volt LED lamps only:OMEGA: ORW...

PCB board for some Robinhood, Parmco & Omega rangehoods. The motor capacitor needs to be swapped from the existing PCB. This board has 2 x 5-pin connection terminals, 2 x 2-pin lamp connections, suitable for models with halogen or 12 volt LED lamps only:OMEGA: ORW6XA, ORW6XL, ORW9XA, ORW9XLEVERDURE:...

PCB board for some Robinhood, Parmco & Omega rangehoods. The motor capacitor needs to be swapped from the existing PCB. This board has 2 x 5-pin connection terminals, 2 x 2-pin LED lamp connections, it is only suitable for versions that have LED lamps or you can change to LED lamps, do not use for h...

PCB board for some touch control rangehoods, only suitable for model versions that have LED lamps or you can change to LED lamps, do not use for halogen lamp models:BELLINI: BDRA603TBX, BDRA903TBX2EVERDURE: RBESF602, RBESF902PARMCO: DD-700IB-INDNote: Electronic PCBs must be installed by a qualified person and cannot be returned once fitted

Dishwasher door seal, 395mm x 22mm rubber strip, attached to the bottom of the inner door. Fitted to the following models and many others:PARMCO: PD45-SLIM-SS-1, PD45-SLIM-W-1BELLINI: BDW96W, BDW96W-F, BDW96X, BDW96X-F,WHIRLPOOL: AKZM654IX

Oven door hinge for some Bellini ovens:BELLINI: BOA605P Note: Both hinges should be replaced at the same time - if not, the new hinge will quickly wear the older hinge due to the inbalance in tension. No warranty under these conditions

Halogen rangehood light fitting, 20 watt, outer diameter 75mm, body diameter 55mm for a hole size of approximately 60mm, complete with lead & plug. To suit the following models:BELLINI: CRHC9S01, CRHC9S01-F, CRHC9S01-1

Oven door hinge for some Bellini ovens:BELLINI: BDI610, BO610CX-1, BO610CX1-F, BO610CX-2, BO610CX-2F, BO6602X-1, BO6602X-1F, BO604B, BO604B-F, BO607B, BO607B-F Note: Both hinges should be replaced at the same time - if not, the new hinge will quickly wear the older hinge due to the inbalance in tension. No warranty under these conditions

Oven temperature thermostat, 16 amp 250 volts AC, to suit some Bellini ovens:BELLINI: BO610CX, BO610CX-1, BO610CX1-F, BO610CX-2, BO610CX-2F, BO610TCX, BO6602X, BO6602X-1, BO6602X-1F, BO6602X-F

Fan motor assembly (mounted in the rear of the oven, behind the fan cover for circulating the heat from the circular fan element). Shaft length forward of the mounting tripod 38mm, total shaft length forward of the cooling fan blade 43mm, listed for the following Bellini oven models:BELLINI: BO610CX-1, BO610CX1-F, BO610CX-2, BO610CX-2F, BO6602X-1 Alternative is OFM13

Display printed circuit board (PCB) fitted to the following oven models. Please send us a photo of your display to ensure the correct part is supplied:MIDEA:BELLINI: BOM609CX, BDOM609TCXTRIESTE: TRFM3765, TRFM3765IXPARMCO: OV-M1-6S-9

Main power board for Eurotech ceramic cooktop model MCHF-605. There are two versions of this board which are NOT interchangeable - you will need to check the part detail on the board itself. Early boards used a 6 pin connector, this latest version uses a 10 pin.EUROTECH: MC-HF605BELLINI: BC604TG