Kiwisparks 334 views   3 clicks ♡

New genuine Smeg rangehood printed circuit board with slide switches for fan speed and one for light control, plus a neon indicator. Please note this part should be fitted by a qualified person. Fits models:SMEG: K2020, K2035, K2039, K2039S

Used parts, tested ok, 90 day warrantyControl switch assembly & power PCB to suit some F&P rangehoods:F&P: 50122-A HC120PHTX1, 50123-A HC60PHTX1, 50121-A HC90PHTX1, 50024-A HC120PHTX1, 50022-A HC60PHTX1, 50023-A HC90PHTX1, 80700-A HC90CGX1,81337-A HC90CGX1

Used part, tested ok, 60 day warrantyParmco 4-button selector switch buttons (square button models) to suit the following rangehoods:RCAN-1000, RCAN-6S-1000, RCAN-6W-1000, RCAN-9S-1000, RCAN-9W-1000, T4-11, T4-11GLA, T4-11GLA-6, T4-12, T4-12LOW, RBOX, RBOX-6S-1000, RBOX-6W-1000, RBOX-9S-1000, T2, T2...

Rangehood selector switch assembly, for models:AWARD: PPS80SI, PPS80-SI, PPS600, PPS600/1, PPS800/1BLANCO: BRU53X, BRU70X, BRU70X-3, BRU7G

Hotplate control selector switch for solid elements - this is a 7 position switch (6 0). Fitted to:EVERDURE: EFE69W, UFEE61, UFES61OMEGA: OF5061, OF6046WB, OF6061WZ, OF6062WZ, OF6146WB

Robinhood 5 button selector switch to suit the following models:ROBINHOOD: RPC3CL52SSMB, RWD3CL6SSDC, RWD3CL9SSDC, RWE3CL6MBDC, RWE3CL6SSDC, RWE3CL9SSDC

Bellini 5-button selector switch, 1.8m lead & plug, to suit the following models:BELLINI: CRHC9S01, CRHC9S01-FCan be used in other rangehoods with the same mounting & plug

Touch selector PCB for some Robinhood rangehood models:ROBINHOOD: RIJ3CL9BKDC, RWJ3CL9BKDC

Robinhood 5 button selector switch with 700mm lead and plug for model RHWCAN60WKOHC

Metal bracket to repair the plastic switch mounting on some Eurotech rangehoods, will be useful for other models as well. 135mm long, threaded mounting holes at 105 & 135mm, to suit 5 button switches with 17mm toggle centres. Especially for the following models:EUROTECH: EDPOWERPACK60, ED-POWERPACK6...

Everdure rangehood selector slide switches with wiring loom to suit the following models:EVERDURE: RBES622, RBES62B2EUROMAID: RS6S, RS9S

Rangehood selector switch kit, 5 button, 5 x push-in wire terminals, complete with bootlace terminals for the push-in terminals on the switch. Fitted to hundreds of models by Parmco, Eurotech and many others. These are side mounted - the screw holes are at 90 degrees to the body.Every appliance tech...

Indesit touch control unit for the following rangehoods:HBE6X HBE9X HKB6XHA HKB7XHA HKB9XHA HKE6X HKE6XHA HKE9X HKE9XHA HKQB6XHA HKQB9LXHA HKQB9X HKQB9XHA HXB6DX HXB6X HXB9DX HXB9X IHLB9LTXHA IKB9XHA IKQB9LXHA IKQB9X

5-button pushbutton selector switch to suit the following rangehoods:ARISTON: GFI632AN F037278 (859990372780) (859990372780) GFI632IX F037280 (859990372800) (859990372800) GFI632WH F037279 (859990372790) (859990372790) GFI641IX F037488 (869990374880) (859990374880)

Rangehood selector switch, 5 button, fitted to early versions of Eurotech ED-Camino60 &ED-Camino90 rangehoods without LED lights.

Rangehood selector switch, 5 button, fitted to later versions of Eurotech ED-Camino60 &ED-Camino90 rangehoods with LED lights.

Selector switch, 5 button, 5 x wire loom approximately 650mm long, fitted to the following models:EUROTECH: EDPOWERPACK60, ED-POWERPACK60, EDPOWERPACK90, ED-POWERPACK90, EDPOWERPACK90.1, ED-POWERPACK90.1Bare selector switch only use RHSUNIKITMust be fitted by a registered electrician, live mains ter...

Slide switch assembly for the Trieste slide out rangehood:TRIESTE: TRIESTESLIDEOUT60, TRIESTESLIDEOUT90

Selector switch, 5 button, with wiring, fitted to the following models:EUROTECH: ED-RHW60SS, EDRHW60SSMust be fitted by a registered electrician, live mains terminals