Bluetti EB70 Portable Power Station Capacity 716WH, AC Output 1000W, Surge (1400W) 2* USB-C 100W, 2* USB A Port, 15W Max Wireless Charging Pad, 200w Max Solar Input,

100% Traditional Layby. Delivery after full payment.Attention, eager beaver! Need your delivery in a flash?No worries, mate! We're here to save the day! Just give us an email atcontact@layawayau.comand let us know if you would like to pay more or less each week. Rest assured, we'll also provide you with an estimated delivery date when we make these changes. So don't you worry, your delivery dreams are in safe hands! Warning:- This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone's eyes.
- This flashlight will accumulate a lot of heat when used for extended periods, resulting in high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
- All information provided in this manual is subject to change without prior notice.Warranty: 5-Years Free Repair Warranty (Battery for 1 year)!NOTE: Please ensure the insulation sheet of the battery removed for the first use.

The Fenix TK16 V2.0 is a tactical flashlight featuring incredible performance by throwing a maximum 3100 lumens 1247 feet (380m). Quickly and easily operate the light, and choose between six lighting modes, by using the dual tactical tail switches.

It's durable and rugged with an IP68 dustproof and waterproof rating, plus the stainless steel strike bezel includes tungsten steel breaking tips. Powered by an included rechargeable 5000mAh li-ion battery make the Fenix TK16 V2.0 flashlight your go-to tool for long-lasting tactical performance.Size: Length: 5.63'' (143mm) x Head: 1.34'' (34mm) x Body 1.00'' (25.4mm)
Weight: 3.95 oz / 112 grams (Excluding Battery)
Battery Type: One 21700 Rechargeable Battery
Additional Features:

- One Luminus SST70 LED with a lifespan of 50,000 hours.
- Advanced Pulse-Frequency Transmission System (APF).
- Instant activation and strobe with the dual tactical tail switches.
- Stainless steel strike bezel inlaid tungsten steel breaking tips.
- Toughened ultra-clear glass lens with an anti-reflective coating.
- Made of durable A6061-T6 aluminum.
- Premium type HAIII hard-anodized anti-abrasive finish.Operating Instructions:Switches of the Fenix TK16 V2.0 Tactical Flashlight:

- The round tail switch is the tactical switch for instant activation.
- The oval tail switch is the functional switch for output selection and instant strobe.On/off:

Tap the tactical switch to silently and momentarily turn on the light, release the light will go out.
Fully press the tactical switch to constantly turn on the light, press again the light will go out.

Output Selection: With the light switched on, single click the functional switch to cycle through Eco, Low, Med, High, Turbo.Strobe:

- With the light switched on, press and hold the functional switch for 0.5 seconds to enter strobe, click the functional switch once again to turn back to the general mode.
- With the light switched off, press the functional switch to enter strobe, release the light will go out.

Intelligent Memory Circuit: The light memorizes the last selected output excluding strobe. When turned on again the previously used output of general mode will be recalled.

Intelligent Overheat Protection: The light will accumulate a lot of heat when used on Turbo output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of Turbo mode.

Low-voltage Warning: When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output mode, the light blinks 3 times every 5 minutes to remind you to timely recharge or replace the battery.

Charging: Remove the battery from the TK16 V2.0 and plug the included charging cord into the port on the battery, with the other end plugged into a USB wall brick.Usage and Maintenance:

- Disassembling the sealed head can cause damage to the light and will void the warranty.
- Fenix recommends using an excellent quality battery.
- If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
- Unscrew the light tail or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the light's performance as dirt