Mountain Adventure 36 views Claim this Business♡

Small, redundancy rigging plate made of robust stainless steel ideal for fire fighting and rescue operations - Two rigging plates riveted together for 100 % redundancy- Wide hole diameter (20 mm) with deflection radius designed to protect fabricDimensions: 60 x 60 x 10 mmWeight: 140g Tech Info:Minim...

Robust lanyard and sling anchor with a 6 mm steel core. For creating anchor points on sharp-edged structures as well as for back-up safety when used in restraint systems and for workplace stabilisation.Features: - Two terminations with synthetic sheath securely position the lanyard and prevent abras...

Small, lightweight aluminium rigging plate suitable for extending from one to three anchor points.Features:Hole diameter: 20 mmCentral opening can take up to three carabinersWrought construction for optimum material utilisation.Low weight and high strength 6 mm thickMaximum breaking strength: 36 kNT...

Figure 8 descender - enables precise rappelling speed adjustment.The special geometry of the HANNIBAL enables various braking levels, making it possible to precisely adjust the abseiling speed.Features:- Suitable for single ropes from 8.5–12.0 mm- With internal rubber ring to hold the carabiner in...

A practical aluminium pulley with a maximum working load of 30 kN (15 kN in both directions).The Turn pulley is ideal for use in rescue systems and on tensioned rope ways.Weight: 94g

Ultra-light pulley with backstop. Designed for lifting loads, crevasse rescue operations, or as an emergency ascender.:- The backstop can be fixed in the open position in order to use the device as a simple pulley- Diameter pulley: 20 mm- Suitable for ropes with a diameter of 7.0 to 11.0 mm as well...

The Edelrid CUPID Swivel Connector is a revolutionary aluminium swivel featuring a secure screw-lock mechanism and exceptional rotation.This connector minimizes rope twist and optimizes lanyard performance, making it ideal for professional climbers, rope access technicians and anyone requiring a dep...

Cruiser Left Foot Sophisticated foot ascender that enables efficient and low-fatigue climbing on the rope.A pre-installed but removable rope safety device prevents unintentional release.The locking mechanism of the FOOT CRUISER is easy to operate—even with your feet.The ascent loop is fitted with...

Cruiser Right Foot Sophisticated foot ascender that enables efficient and low-fatigue climbing on the rope.A pre-installed but removable rope safety device prevents unintentional release.The locking mechanism of the FOOT CRUISER is easy to operate—even with your feet.The ascent loop is fitted with...

Cruiser Left Hand Ergonomically shaped hand ascender for a comfortable ascent on the rope.The curved design increases comfort and reduces friction in the system.A large eyelet allows several carabiners to be attached; a smaller eyelet slightly higher is ideal for setting up a directional anchor.Also...

Cruiser Right Hand Ergonomically shaped hand ascender for a comfortable ascent on the rope.The curved design increases comfort and reduces friction in the system.A large eyelet allows several carabiners to be attached; a smaller eyelet slightly higher is ideal for setting up a directional anchor.Als...

The Cruiser Chest Harness Compact chest ascender for efficient and fatigue-free climbing on the rope.The ascender can be opened with a simple movement.The modular construction with the fastening plate and the textile fasteningloops allows the integration into different chest harness systems.:- Modul...

The FUSE sets new standards for guided type fall arresters.Whether ascending or descending, the integrated centrifugal brake enables the device to move up/down the belay rope with incomparable ease from the very first meter.Furthermore, its ability, as a single device, to comply with all relevant Eu...

The new Universal Descender from Edelrid!The MEGAWATT is an intuitive and reliable descender with a wide range of potential uses when working with ropes and in rescue scenarios. It fulfills four important work safety standards (EN 12841-C, EN 341-2A, EN 15151-1/8, and ANSI/ASSE Z359.4).The MEGAWATT...

Large, robust aluminium rigging plate for use in complex systems and for extending the number of anchor points.Features:- 7 mm thick- Hole diameter: 20 mm- Central opening can take up to three carabiners- Wrought construction for optimum material utilisation.- Low weight and high strength Dimensions...

A classic redesigned sturdy piece of equipment. For universal usage such as rappelling and belaying.A tried and test piece of climbing gear that is as old as the sport itself.The Edelrid Descender Figure 8 has a universal usage across the climbing sport and is as necessary as your rope and harness.T...

Pinch - a new belaying experience with the PINCH, a new, versatile assisted braking belay device for use in sport climbing, multi-pitch climbing and rope access techniques.The PINCH is the first device on the market that can be attached directly to the central ring of the climbing harness. Thanks to...

Figure 8 large aluminium descender with ears for belay, descent and positioning.Technical Info:Approved rope diameter: 7,8 - 12,0 mmCertification: EN 15151-2Material: Aluminium Weight: 240g

Large pulley - for block and tackle systems in rescue operationsThe PIKE RESCUE is a large pulley used in simple and more complex block and tackle systems for rescue operations. It has a particularly high breaking load. The large carabiner opening offers enough space for two carabiners while a locki...

Ball-bearing pulley for block and tackles as well as directional anchorsThe FLUX is a small, practical, ball-bearing pulley for block and tackles as well as directional anchors with fabric ropes and medium loads. The movable side pieces enable quick and easy installation. The large carabiner hole fi...