MPD 1 views Claim this Business♡

Replacement Mower Spindle assembly for John Deere L and D series Mowers. Replaces Part GY21098 or AUC15811Includes taptite deck fitment bolts as well as blade and spindles pulley nuts. (Please note: The mounting holes in these spindles are not pre threaded. They are designed to be use with Taptite o...

Spindle Assembly Replaces Cub Cadet 918-0659, 618-0659, and old # 618-0624. Fits models LT1040, LT1042, LX420 (13AX60RG544, Part# 112-0460) & RZT mowers with 42" decks using star hole blade. Comes with Rotary 12682 pulley. Spindle Shaft only is Rotary 12926 (738-1010A).Replaces:CUB CADET 918-0659CUB...

Spindle assembly fits 46" Decks, Early 3 Star Hole for blades.Uses Double Pulley. LH Spindle for 800 series 1996 & earlier. Shaft is 5.95 inches end to end. 5/8" unf thread on both ends. Spindle holes are unthreaded. Sold less pulley

MTD Cub Cadet 46" Deck Spindle Replaces 618-0240, 618-0240A, 618-0430A, 918-0240C, 918-0430A, 918-0430C, 618-0430, 618-0430B, 918-0240A, 918-0430B, 918-0430, 918-0240. 4 Bolt square spindle. 5/8" UNF male threads at both ends of shaft. Threads are not tapped in housing. Use old housing mount bolts and shaft nuts. Shaft is 5.25 inches end to end

Spindle for Castelgarden LH 189mm Replaces genuine part 82207201/0. used on right hand side of Castelgarden made 40" and 48" rear catching mowers. These are the mowers with the timing belt driving between the 2 blades. Spindles comes complete with housing, 2 bearings and shaft. This

Spindle Assembly Husqvarna and AYP Replaces OEM:AYP: 143651HUSQVARNA: 532 14 36-51Fits Models:AYP 44" and 50" deckHUSQVARNA 44", 46" and 50" ventilated deck using star shaped center bladesSpecs:Height: 4 7/8 "

Deck Spindle housing for Husqvarna , Craftsman, Jonsered and Poulan Pro mowers with 48" and 54" mowing decks. 4 bolt mounting pattern

Noma Spindle 317705. Used on Husqvarna 4 wheel steer mowers made in the 1990's. Also Dynamark, Bolens,Viking, Victa, Murray. Check dimensions in photo to see if this will fit your machine

Cub Cadet and MTD spindle. Common on 46" decks Uses 756-1188 5 9/16" pulley. Uses 6204 2RS Bearing 47mm x 20mm x14mm (.787" x 1.85" x.551"). Centre and pulley spacer are 1.8" long. Shaft is part 753-06348. 6.11" long. 6 star driveCUB CADET: 618-0625B, 618-0660, 618-0660A, 918-0625B, 918-0660MTD: 618-0625B, 618-0660, 618-0660A, 918-0625B, 918-0660

MTD or Cub Cadet Deck spindle complete. Replaces part number 918-04822B Primarily used on "D' and "S" deck mowers. If your machine has a D or S as the 4th to last character in the product number this spindle will likely fit. D is a 30" single blade mini Rider and S is a 42" late model side discharge...

CastelGarden Deck spindle Replaces Part 82207200/0. This is the left spindle from the 40" and 48" (102mm and 122mm) Catching decks with timing belt drive. This spindle has the extended shaft to accommodate both the timing belt pulley and the engine drive pulley and a right hand thread in the bottom ...

Spindle for Castlegarden LH 179mm This spindle is on the left side of the 36" deck non timed Castelgarden decks. This has a right hand thread bolt to hold on the blade

Spindle assembly to fit John Deere L series mowers. Fits mowers that have 2 bolts holding the blades onto the spindle. Fits models Sabre14.542GS 1642HS and 17.542HS L100, L110,L120,L130, L105, L107, L118,L111, L108 Replaces John Deere Part GY20050 Please check the photo in the listing, we also have available the later style spindle part GY21098

Spindle Assembly Replaces Cub Cadet 918-04461 and 918 04456. 6.3" Pulley Fits 42" deck MTD and Cub Cadet machines. Star drive

Cub Cadet Spindle and Pulley Pulley is 6.75" across. Unthreaded mounting holes in housing. These are designed for Taptite bolts Deck Spindle replaces MTD/Cub Cadet 918-06977A. Fits MTD models 131AQ1ZT099, 132QA1ZT099, 13AQA1ZT099, 13A8A1ZT099, 13ATA1ZT099, 13BQA1ZT099, 13APA1ZT093, 13ALA1ZT091, 13APA1KT897, 13AZA1KT897. Fits Cub models XT1-LT46 and XT2-LX46

MTD Spindle

Spindle Assembly MTD Rover, Cub Cadet and White rear catcher 41" with pulley left side. Replaces 618-04657 and 918-04657 Used on the right side of 41" rear catcher decks on Rover, MTD, White and Cub Cadet mowers. Matches with 918-0609 on the left side of the deckPlease Note: The mounting threads on ...

Spindle Assembly Husqvarna Vented Deck 3 bolt mount complete with shaft and bearings. Replaces 532130794 or 130794. This part fits most Husqvarna, Poulan, Jonsered, Weedeater and Craftsman mowers between 1990 and around 2004. Used on the left side of the centre rear discharge catching mowers.The bla...

Spindle Assembly MTD Rover, Cub Cadet and White rear catcher 41" with pulley left side. Replaces 618-0609 and 918-0609 Used on the left side of 41" rear catcher decks on Rover, MTD, White and Cub Cadet mowers. Matches with 918-04657 on the right side of the deckPlease Note: The mounting threads on t...

Cub Cadet, MTD and Yardman Deck spindle Fits 42" machines. 6.3" pulley and 5.5" drive shaft. 6 Star blade drive Replaces 618-04456 and 918-04456 as well as 618-04461 and 918-04461. Spindle mount threads are not formed, they should be fitted with the original Tap Tite Mounting screws. These will form...

Deck Spindle housing for Husqvarna , Craftsman, Jonsered and Poulan Pro mowers with 38" and 42" rear catcher gearbox deck Husqvarna 137152 or 532 137 152. Spindle has 3 hold down bolts

MTD Spindle