Native Pens 26 views   2 clicks Claim this Business♡

Classic Fountain pen kit with Gold Plating. Action: Static

Eliminate the guesswork when transferring/cutting complicated baseboard or crown angles with the Milescraft® AngleFinder™. This tool conveniently and quickly sets up on your miter saw and transfers the angle to your blade.AngleFinder Features- Works on both inside and outside corners- Retractable...

Classic Fountain Pen Replacement Nib - GoldAlso suitable for Traditional Fountain pens.

A fine U shaped fluted Bowl Gouge with solid shaft and replaceable cutting tip, ideal for finer detail or cutting curley grain.

A fine U shaped fluted Bowl Gouge with solid shaft and replaceable cutting tip, ideal for finer detail or cutting curley grain.

3" x 4" Micro Mesh Soft Touch, Ultra-Flex Coloured polishing pad set.Each pad is color coded and has the same Micro-Mesh® grade on both sides. Can be used wet or dry. These pads can be rinsed, allowed to thoroughly dry and be stored away for further use. Each variety pack includes a handy color cod...

2" x 2" Micro Mesh Soft Touch, Ultra-Flex Coloured polishing pad set.Each pad is color coded and has the same Micro-Mesh® grade on both sides. Can be used wet or dry. These pads can be rinsed, allowed to thoroughly dry and be stored away for further use. Each variety pack includes a handy color cod...

2" x 2" Micro Mesh Soft Touch, Ultra-Flex Coloured polishing pad set.Each pad is color coded and has the same Micro-Mesh® grade on both sides. Can be used wet or dry. These pads can be rinsed, allowed to thoroughly dry and be stored away for further use. Each variety pack includes a handy color cod...

Live Rotating Centre with #2 Morse Taper.Ø31mm head with precision 60° point.Excellent general purpose centre includes twin deep groove ball bearings.Made in the UK

Lathe Alignment Tool - #2 Morse Taper.The Lathe Alignment tool is used between the morse taper of the headstock and the morse taper of the tailstock to align the headstock.Suitable for head alignment of lathes that use morse taper #2 in the headstock and tailstock. Made in the UK

Lace Bobbin Drive with #2 Morse Taper.Tapered drive for Lace Bobbins, Calligraphy Pens,.Mouth of drive is 1/2" square.Made in the UK

Finial Support Kit with #2 Morse Taper.The Finial Support fits into the tail stock and offers support for the fine end of a finial whilst turning the rest of it.Included are 3 Delrin (nylon type) inserts with 3 sizes 3mm, 4.5mm & 6mm hole depending on the size of Finial being turned.They fit int...

Universal Deluxe Mandrel Pen Turning Kit.The universal pen mandrel has been designed for professionals to provide a means of holding practically any size of pen barrel during the turning operation. It is capable of accommodating either one or two components at a time by simply adjusting the length o...

Universal Deluxe Mandrel Pen Turning Kit.The universal pen mandrel has been designed for professionals to provide a means of holding practically any size of pen barrel during the turning operation. It is capable of accommodating either one or two components at a time by simply adjusting the length o...

Deluxe Colleted Pen Mandrel with #2 Morse Taper. Designed in the UK for pen turning professionals. Its unique quarter-turn action clamps the shaft in place accurately and its completely dust free collet remains hidden.

Dead Centre with #2 Morse Taper.Used for turning pens without a mandrel. 

Pen Mandrel Support with #2 Morse Taper.Precision dual bearing design. The Pen Mandrel support is designed to save the center point and the mandrel shaft from damage caused by over tightening the tailstock center.Made in the UK

Pen Mandrel Support with #1 Morse Taper.Precision dual bearing design. The Pen Mandrel support is designed to save the center point and the mandrel shaft from damage caused by over tightening the tailstock center.Made in the UK

Live Rotating Centre with #2 Morse Taper.Ø31mm head with precision 60° point.Excellent general purpose centre includes twin deep groove ball bearings.Made in the UK

Lathe Alignment Tool - #2 Morse Taper.The Lathe Alignment tool is used between the morse taper of the headstock and the morse taper of the tailstock to align the headstock.Suitable for head alignment of lathes that use morse taper #2 in the headstock and tailstock. Made in the UK

Lace Bobbin Drive with #2 Morse Taper.Tapered drive for Lace Bobbins, Calligraphy Pens,.Mouth of drive is 1/2" square.Made in the UK

Finial Support Kit with #2 Morse Taper.The Finial Support fits into the tail stock and offers support for the fine end of a finial whilst turning the rest of it.Included are 3 Delrin (nylon type) inserts with 3 sizes 3mm, 4.5mm & 6mm hole depending on the size of Finial being turned.They fit int...

Dead Centre with #2 Morse Taper.Used for turning pens without a mandrel. 

Pen Mandrel Support with #2 Morse Taper.Precision dual bearing design. The Pen Mandrel support is designed to save the center point and the mandrel shaft from damage caused by over tightening the tailstock center.Made in the UK