Floor Finishing Kit 'Colour' 120sqm
Everything you need to colour and maintain your timber floor in one box! Developed over more than twenty years, our tree resin based penetrating oils protect and harden timber from within. Your timber is allowed to breathe … a hard wearing, water resistant, imbedded protective surface is established: which will be further enhanced by Natural House MicroWax and MicroClean maintenance products. For previously oiled and/or fresh sanded floors a light pole sand and vacuum clean is all you require before application. Everything you need is in this one box to easily create a beautiful, coloured floor.
Step one - Preparation: 17-22 deg C is the target temperature. The objective is to maintain a constant room temperature with good airflow. The surface must be dry, clean and free of grease. Timber moisture content should be no more than 14%. Lightly sand the floor in the direction of the grain using the Pole & Sander Head with the 120 grit screens supplied. It is imperative that Java Oils can penetrate and bond into the surface of the timber. IMPORTANT: do not burnish the surface of the timber by trying to achieve a very fine sand! If filling knots or small cracks use a water based Wood Filler, applying sparingly as per manufacturer instruction (black is usually best). Sand and remove dust before coating.
Step two - Vacuum: Special care should be taken to remove any dust from the pores of the timber. Vacuum the floor area thoroughly to remove dust and dirt.
Step three - Apply Java High Solid Colour: Mix the colour by shaking or tipping the container to ensure it is thoroughly mixed. Application temperature should be between 17-22 degC. Attach the Lamb’s Wool Applicator to the collapsible extension pole provided. Pour the colour into the paint tray and lightly dip the applicator into the colour. Dab the applicator evenly on the tray spreader to remove excess. To apply, wipe the applicator onto the floor, work across the grain to massage the colour into the timber. Continue working with the grain without adding more stain, until the appearance is even. Wipe back the excess stain using the second clean applicator pad (or cotton cloth). Wipe in the direction of the grain until the colour is even and there are no visible application marks. Work in manageable areas of approx 4 sqm blending as you go. If you apply too much stain, wipe the applicator on a cotton cloth and wipe the floor area back to an even finish with a cotton cloth or towel. Edges and corners should be wiped back as you go. Leave to dry, with good ventilation. IMPORTANT: It is important to leave this coat for 48 hours to thoroughly dry & cure.
Step four - Apply the first Top Coat of Java High Solid Clear: The second application should be a fine coat of Java High Solid Clear, on top of the colour. Thin layers dry and cure more efficiently, ensuring a tougher finish. Be careful to prevent build up along edges. Mix the oil by shaking or tipping the container to allow the oil to mix thoroughly and ensure non separation. Pour the Java High Solid Oil into the clean roller tray. Application temperature should be between 17-22 degC. Use the 50mm brush to neatly apply the oil to areas where the floor meets walls or door frames before rolling. Using the 6mm microfibre roller, roll sparingly and evenly onto the timber in the direction of the grain. Leave for 12-24 hours to dry, with good ventilation.
Step five - Apply final top coat of Java High Solid: Apply the second top coat as the first. Leave for 12-24 hours to dry, with good ventilation. WARNING: SPREAD, OIL SOAKED TOWELS AND CLOTHS OUTSIDE TO DRY. DO NOT LEAVE IN A CRUMPLED STATE OR SELF COMBUSTION CAN OCCUR
Clean Up: Clean brushes/rollers in white spirit, followed by warm soapy water.
Safety Instructions: Keep out of reach of children. Do not pour oil residue into the sewer. Let the remnants dry out and dispose of with your domestic rubbish collection.
Initial Floor Care: Treat all new floor surfaces with great care as they continue to harden for up to 4 weeks. Correctly applied, Java High Solid Oil will cure to good strength after a period of 10-14 days, avoid water contact and do not wet mop before this time. The surface will continue to harden for up to 28 days. It’s advisable to take extra care throughout this time & use felt pads under your furniture.
General Cleaning: Use the Natural House MicroWax and MicroClean for your weekly or regular cleaning. Add 1 cap full (approx. 10ml) of the MicroWax and 1 cap fill (approx. 10ml) of the MicroClean to 1 litre of water in a handy spray bottle. Shake well before use, mist spray the solution over the floor. Mop using a microfibre mop, leave to dry.
Nourish & Replenish: Use Natural House MicroWax with a 50/50 solution o
0
0
Step one - Preparation: 17-22 deg C is the target temperature. The objective is to maintain a constant room temperature with good airflow. The surface must be dry, clean and free of grease. Timber moisture content should be no more than 14%. Lightly sand the floor in the direction of the grain using the Pole & Sander Head with the 120 grit screens supplied. It is imperative that Java Oils can penetrate and bond into the surface of the timber. IMPORTANT: do not burnish the surface of the timber by trying to achieve a very fine sand! If filling knots or small cracks use a water based Wood Filler, applying sparingly as per manufacturer instruction (black is usually best). Sand and remove dust before coating.
Step two - Vacuum: Special care should be taken to remove any dust from the pores of the timber. Vacuum the floor area thoroughly to remove dust and dirt.
Step three - Apply Java High Solid Colour: Mix the colour by shaking or tipping the container to ensure it is thoroughly mixed. Application temperature should be between 17-22 degC. Attach the Lamb’s Wool Applicator to the collapsible extension pole provided. Pour the colour into the paint tray and lightly dip the applicator into the colour. Dab the applicator evenly on the tray spreader to remove excess. To apply, wipe the applicator onto the floor, work across the grain to massage the colour into the timber. Continue working with the grain without adding more stain, until the appearance is even. Wipe back the excess stain using the second clean applicator pad (or cotton cloth). Wipe in the direction of the grain until the colour is even and there are no visible application marks. Work in manageable areas of approx 4 sqm blending as you go. If you apply too much stain, wipe the applicator on a cotton cloth and wipe the floor area back to an even finish with a cotton cloth or towel. Edges and corners should be wiped back as you go. Leave to dry, with good ventilation. IMPORTANT: It is important to leave this coat for 48 hours to thoroughly dry & cure.
Step four - Apply the first Top Coat of Java High Solid Clear: The second application should be a fine coat of Java High Solid Clear, on top of the colour. Thin layers dry and cure more efficiently, ensuring a tougher finish. Be careful to prevent build up along edges. Mix the oil by shaking or tipping the container to allow the oil to mix thoroughly and ensure non separation. Pour the Java High Solid Oil into the clean roller tray. Application temperature should be between 17-22 degC. Use the 50mm brush to neatly apply the oil to areas where the floor meets walls or door frames before rolling. Using the 6mm microfibre roller, roll sparingly and evenly onto the timber in the direction of the grain. Leave for 12-24 hours to dry, with good ventilation.
Step five - Apply final top coat of Java High Solid: Apply the second top coat as the first. Leave for 12-24 hours to dry, with good ventilation. WARNING: SPREAD, OIL SOAKED TOWELS AND CLOTHS OUTSIDE TO DRY. DO NOT LEAVE IN A CRUMPLED STATE OR SELF COMBUSTION CAN OCCUR
Clean Up: Clean brushes/rollers in white spirit, followed by warm soapy water.
Safety Instructions: Keep out of reach of children. Do not pour oil residue into the sewer. Let the remnants dry out and dispose of with your domestic rubbish collection.
Initial Floor Care: Treat all new floor surfaces with great care as they continue to harden for up to 4 weeks. Correctly applied, Java High Solid Oil will cure to good strength after a period of 10-14 days, avoid water contact and do not wet mop before this time. The surface will continue to harden for up to 28 days. It’s advisable to take extra care throughout this time & use felt pads under your furniture.
General Cleaning: Use the Natural House MicroWax and MicroClean for your weekly or regular cleaning. Add 1 cap full (approx. 10ml) of the MicroWax and 1 cap fill (approx. 10ml) of the MicroClean to 1 litre of water in a handy spray bottle. Shake well before use, mist spray the solution over the floor. Mop using a microfibre mop, leave to dry.
Nourish & Replenish: Use Natural House MicroWax with a 50/50 solution o
×