Yakisugi Char Oil Clear Pro UV+

: Highest quality, transparent oil preservative for char and brushed timber cladding. Now with added UV blockers to substantially increase resistance to UV fading. Feeds and protects against splitting.
Note: While our oils will protect from checking and splitting (when used in accordance with recommended recoat periods) the lighter the pigment, the more noticeable a weathering appearance from UV light and natural occurring mould spores may occur. UV degredation and mould spore development can be extreme in and varies greatly depending in which part of the country you live. Central Otago experiences little mould and more UV silvering, while Auckland and Northland have higher mould issues due to the rainfall and humidity. Please familiarise yourself with 'Expectations on Managing Mould'.
We constantly measure our oils performance against leading manufacturers. An independent distributor and exporter of timber cladding, tested and chose our Exterior Oil to give a 15 year warranty on their products.
Coverage: 7-15 sqm/L

Brief: Highest quality, transparent oil preservative for char and brushed timber cladding. Now with added UV blockers to substantially increase resistance to UV fading. Feeds and protects against splitting.
Use: For preserving, staining/finishing, exterior timber cladding.
Preparation: Ensure timber is clean, dry and free of sawdust, nails or metal filings.
If accessible, apply one coat to rear side and end grain of timber cladding. This will help promote total protection.
Application : Stir well prior and during - brush, roll, or spray on. (for spraying - airless equipment with 18-20 thou. tip provides best delivery).
Apply two even coats - 24 hrs apart.
Within 1 hour of application for each coat remove any excess oil remaining above the surface.
Coverage : 1st coat 2nd coat. New Hardwoods 8-10 sqm/ltr 12-16 sqm/ltr. Softwoods 4-6 sqm/ltr 6-8 sqm/ltr. Cedar 3-4 sqm/ltr 5-7 sqm/ltr
Maintenance : After noting heavy weather/sun aspects, apply a coat of Exterior Oil Pro UV , 12-18 months after initial applications.
Cleaning of implements : Immediately after use clean equipment with plant thinner or mineral turps, followed by soap and water. (for best results use a plant soap)
Safety Instructions : Do not pour oil residue into the sewer. Let the remnants dry out and dispose of with your domestic rubbish collection.
Do not crumple soaked rags (otherwise spontaneous combustion may occur)
Product can create flammable fumes during application.
Composition : Tung Oil, Flaxseed Oil, UV blockers, Mouldicide, Zinc, Cobalt Zirconium drier (lead free).