Oasis Underbench RO with Booster Pump & Remineraliser

Designed for installations with insufficient pressure. This system requires a minimum inward pressure of 30psi

Oasis DP is specially designed for installation under the kitchen sink and comes complete with an installation kit.

OASIS DP is a range of RO units made up of patented and registered DP TRIO filter housings and with RO VESSEL, exclusive reverse osmosis membrane housing with double o-ring. OASIS DP is specially designed for installation under the kitchen sink, complete with an installation kit. All OASIS DP is based on a standard 6 stages unit, made up of 3 pre-filtration stages, RO membrane stage, G.A.C. activated carbon post-filter stage, and re-mineralizer post-filter stage. The units are available in 2 main versions: - OASIS DP with metal wall bracket, available in 4 models: OASIS DP STD - standard 6 stages unit. OASIS DP PUMP - standard 6 stages unit with booster pump.

- A specially designed complete 6-stage reverse osmosis system for under-bench use.
- This unit does an excellent job of eliminating undesirable contaminants, like Nitrate, Fluoride, and Salt. The remineralizing cartridge then puts beneficial minerals back in.
- The unit comes complete, including all required connections, a 16L pressure tank, and a separate drinking water tap
- Oasis DP is specially designed for installation under the kitchen sink and comes complete with an installation kit.
- The unit is capable of producing up to 189 litres per day but in normal domestic installations with minimum pressure requirements being met, it can produce up to 90 litres per day approx.
- Designed in Italy, Assembled in Taiwan, with made in Italy Components

Specifications

- Product Type UBRO Units
- Brand Atlas Filtri (Italy)
- Flow Rate (L/min) 13
- Nominal Micron Rating 5
- Inlet/Outlet 1/4"
- Max Inlet pressure with pump 45psi
- Min Inlet Pressure with pump 14.5psi
- Min Temp (degrees celsius) 4
- Max Temp (degrees celsius) 45
- Application Underbench
- Shipping Package Dimensions 660 x 440 x 310 (13kg)
- Certified by IAPMO RT to NSF/ANSI 42, 61, 372 - lead-free, CSA B483.1. In compliance with Drinking Water Treatment Units regulations, USA and Canada.

Pump

- Voltage 24v
- Supply power 230-240v
- Flow at 5.5 bar = 0.8lpm
- Open flow 1.5lpm
- max output pressure 8 bar
- Amperage 1.2 A
- Power 22w

Working Conditions

- Max inlet pressure PUMP model 3 bar (45.5 psi)
- Min inlet pressure PUMP model1 bar (14.5 psi)
- Max working temperature 45°C (113°F)
- Min working temperature 4°C (39.2°F)
- Max TDS1000 ppm
- Membrane capacity 50 GPD (190 l/day)

Performance

The system has a 12L tank which holds 4L,

Max processing capacity up to 190L a day.
For every 1L of processed water, there is approximately 500ml of concentrate

- Saline reduction 90%
- Bacterial rejection >98%

Test results of water quality after RO membrane (Remineralisation is added after the membrane)The membrane cannot differentiate between ‘good’ and ‘bad’ substances so it removes both

PH 5.5-6.5
Water with a pH of 5.5-6.5 is mildly acidic, which is generally safe for drinking
Note: The re-mineralizing cartridge is designed to increase pH and reintroduce beneficial minerals like Calcium and Magnesium back into the water.

TDS 5-15 ppm:
A Total Dissolved Solids (TDS) measurement of 5-15 parts per million (ppm) is exceptionally low and typically considered excellent for drinking water quality.
Water with such a low TDS concentration generally tastes very pure and is often preferred for drinking. It indicates that the water has very few dissolved minerals, salts, and other contaminants, resulting in a clean and refreshing taste.

Calcium