Outback Boats 1 views Claim this Business♡

This patch kit contains Bostik 999 glue and patch material for in the field repairs.

High strength, heat re-activatable polyurethane contact adhesive. Outstanding heat resistance with high strength. Excellent UV resistance.Used for repairs and additions to our boats. To get the glues to stick properly to polyurethane fabrics the surface must be prepared with MEK solvent. A temporary...

XD100 full synthetic oil 2-stroke oil.We have found plug fowling issues are common with 2-stroke jet drives when running some certain semi synthetic oils. The XD100 full synthetic oil eliminates any issues.

Our rock resistant intakes are a must have for extreme conditions. These intakes last a lot.. longer than the aluminium intakes and protect your outboard jet from high impact forces.Our intakes are manufactured in New Zealand from high grade polyurethane, our grill bars and pins are super tough and ...

Outback Boats to suit Tohatsu 50hp and 30hp 2-stroke outboard jets.Significantly reduces the noise inside and outside the boat. Makes talking to each other in the boat a lot easier and also reduces the noise impact on other river users.Noise reduction at drivers ear on tiller steer model 70%. Noise ...

Main Impeller key to suit Outback Boats Medium Outboard Jet Pump.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Have you wacked your reverse bucket off on a rock and its somewhere at the bottom of the river? here are all the replacement parts you will need.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Pressure gauge to suit Outback Boats inflatable Hulls.

Main Impeller nut to suit Outback Boats Medium Outboard Jet Pump.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Main Impeller Rubber and Cup Washers.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Impeller shaft sleeve to suit Outback Boats Medium Outboard Jet Pump.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Impeller nut lock washer to suit Outback Boats Medium Outboard Jet Pump.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Impeller shims to suit Outback Boats Medium Outboard Jet Pump. (x5) shims included.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Bearing and seal kit for Outback Boats Medium Sized Jets. Includes (x4) lip seals and (x1) Bearing.Suits Outback Boats Jets fitted to:- Mercury and Tohatsu 30hp, 15", 2-strokes- Mercury and Tohatsu 50hp, 15", 2-strokes- Suzuki 60hp, 15", 4-strokes

Engine cooling water pump impeller for Tohatsu 30hp or 50hp / Suzuki 60hp Outboard Jets

Female and male fuel tank fitting to couple together with ether Tohatsu or Suzuki male and female fittings.Female fitting has barb to fit 1/4 ID 6.5mm ID fuel hose. This is a suzuki fitting that will couple with the suzuki or tohatsu male fittingMale fitting has 1/4" BSP male thread. This is a tohatsu fitting that will couple with the tohatsu or suzuki female fitting.

Transom clamp handle for Tohatsu 50hp 2-stroke M50D2

Trim pin for Tohatsu 50hp 2-stroke

Keep your gear safe & dry on your boating trips. Incept Dry Bags are all welded, with reinforced base. Stiffened collar allows easy reliable closure.This DryBag is fitted with padded shoulder straps and compression straps.These are a tough bag and can be easily strapped into the boat.Colours: red, blue, yellow, grey

Electric starter kit for Tohatsu 50hp 2-stroke M50D2(currently for 50hp jets only)Battery not included.

Inflatable Front Passenger Seat to suit Extreme 47 Hulls.Comfortable and secure for passengers (x2) gets the height of the passengers heads a lot lower improving driver visibility. Passengers feel more secure lower down in the hull but still maintain good visibility. Passenger comfort is greatly improved with a good back rest.These seats can be removed and are a good for a comfortable camp chair.

Transom bracing is required for our Extreme 47 when running 4-stroke motors and recommended for 50 2-stroke motors when being run off a trailer. Bracing is not required for 30hp 2-strokes.The bracing takes some load off the joint between the transom, main tube and floor.

Outback Boats Custom Built Galvanized TrailerCustom designed and built by Outback Boats to suit Extreme 47 Boats.Chassis manufactured & assembled in NZ.Price includes GST, and includes on road costs, WOF and 6 month regoex Rangiora

This is a rapid-inflation venturi gun that, when attached to an air compressor, drastically increases the airflow output, allowing for quick & efficient inflation and deflation of our boats.This venturi gun attachment is over 3x faster than the standard electric inflation pumps, with a 344% improvement in speed in inflating a boat.