Zodiac Chlorine Remover 500g | Neutralise Excess Chlorine | Pool
Important: Always re-test after 2 hours and add more if needed. Do not overdose - adding too much can deplete chlorine below safe levels, leaving the water unsanitised. When to Use Chlorine Remover
- After over-shocking. Chlorine spike too high to swim safely.
- Sensitive swimmers. Reduce to lower end of range for children or sensitive skin.
- Before equipment service or drain. Neutralise chlorine before working on pool equipment.
- After heavy rain. If you've added extra chlorine and levels are now too high.
- New fill or top-up. If source water has been over-treated. Safety and Storage
- Keep out of reach of children
- Store in a cool, dry place away from direct sunlight
- Do not mix with other chemicals
- Dissolve in water before adding to pool - never add directly
- Wash hands after handling
- Refer to product label for full safety information Recommended Accessories
- 5-in-1 Test Strips - always test before and after dosing.
- Crystalline Chlorine 4kg - your primary pool sanitiser once levels are back in range.
- Zodiac Natural Clarifier 1L - restore water clarity after chemical adjustments. Frequently Asked Questions
Q: How quickly does Zodiac Chlorine Remover work?
A: It acts quickly once dissolved and added to the water. Run your pump and filter for 2 hours then re-test. Most situations are resolved within one treatment.
Q: Can I use this in a spa pool?
A: This product is designed for swimming pools. Spa pools are typically 1,000-2,000L, which means the required dose would be less than 1g - too small to measure accurately and easy to overdose. For spa chlorine management, we recommend diluting by topping up with fresh water or allowing levels to drop naturally with the cover off. if you need advice.
Q: What if I add too much?
A: Adding too much chlorine remover will deplete your chlorine below safe levels, leaving the water unsanitised. Always dose conservatively, re-test after 2 hours, and add more only if needed.
Q: What is the active ingredient?
A: Sodium thiosulphate - a well-established, safe chlorine neutraliser used in pools worldwide.
Q: Will it affect my pH or alkalinity?
A: Sodium thiosulphate can have a minor effect on pH. Re-test all parameters after use and adjust if needed.
Q: How do I know how much chlorine I need to remove?
A: Test your water first with test strips to get your current chlorine reading, then calculate the difference between your current level and your target level. Use the dosage table above.
Q: Is this product covered by a warranty?
A: Yes, this product is backed by a manufacturer warranty. For warranty queries,. Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm - Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.