Round Spa Pool Cover Lifter | Suits Spas Up to 42" Height
- Confirm your spa is round.
- Confirm your spa height does not exceed 42" (approx. 107cm).
- Measure your spa diameter.
- Check the available floor space beside your spa for the ground-mount base plate.
- Check clearance above and around the spa for the lifting arms when the cover is raised.
- Contact Perfect Pools if you are unsure about compatibility before purchasing. How It Works
The lifter base plate sits on the ground alongside your spa. A vertical steel frame rises from the base, and tubular steel arms extend to cradle the spa cover. When you open your spa, the gas strut assists the lifting action, taking the weight of the cover and holding it in a raised position while you use the spa. When you are done, the cover folds back down into place. The result is a cleaner, easier routine every time you use your spa, with no awkward manual lifting or resting the cover against the spa shell. Installation
The base plate is positioned on the ground beside your spa. Fixing requirements and exact positioning will depend on your spa diameter and the available space around it. Please refer to the supplied installation instructions for your specific unit. Check before installing: Confirm available floor space and clearance around your spa for the base plate and lifting arms. Confirm your spa height is within the 42" maximum. Check any requirements from your spa manufacturer regarding accessories placed alongside the cabinet. If in doubt, seek professional installation advice. Frequently Asked Questions
Is this designed for round spa pools?
Yes, this listing is specifically intended for round spa applications.
What is the maximum spa height?
This lifter suits spas up to 42" (approx. 107cm) in height. Measure your spa before ordering.
Will it fit my round spa?
Fit depends on your spa height (max 42"), diameter, and available floor space beside the spa for the ground-mount base. Measure first and contact Perfect Pools if you are unsure before ordering.
Does it need to be drilled into the spa cabinet?
The base plate sits on the ground beside the spa rather than mounting to the spa cabinet. Please refer to the supplied installation instructions for full fixing details.
Does the gas strut make it easier to lift the cover?
Yes. The gas strut assists the lifting action, reducing the effort required to open and close the cover.
Does a lifter help protect my spa cover?
Supporting the cover off the ground can reduce dragging and unnecessary handling that may contribute to wear over time.
What if I have a square spa?
This listing is intended for round spas. For square or rectangular spa pools, see our Undermount Cradle Cover Lifter or Spa Cover Lifter up to 2800 x 2800mm. Pair With a Round Spa Cover
A cover lifter works best when paired with a well-fitted spa cover. If you also need a replacement cover for your round spa, see our Round Spa Pool Cover. Related Products
- Spa Pool Cover Lifter - Undermount Cradle - One-Person Operation
- Spa Cover Lifter - Up to 2800 x 2800mm
- Round Spa Pool Cover - 2040mm - Charcoal
- Spa Steps - Anti-Slip - 300kg Rated
- Spa Water Care & Treatments Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm - Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.