"The Sharpshooter" chisel plane w/ spearpoint blade (Marcou Toolworks)

The Sharpshooter

Precision has a name.

The Sharpshooter is a specialized chisel plane built for the cuts other tools can't make. Unlike traditional planes, it has no body ahead of the cutting iron — the blade itself forms the absolute front and bottom edge of the tool. The result is a hybrid instrument, part chisel, part low-angle block plane, engineered for one purpose: getting into places conventional planes simply can't reach.

At its core is a spearpoint blade set at less than 45 degrees, with the following advantages:

- Cleaner cuts on end grain — the low angle slices through fibers rather than tearing them, leaving a smoother finish where grain direction would otherwise cause chipping.
- Less resistance, less effort — a lower angle requires less downward force to pare material, making fine adjustments easier to control.
- Precision in tight spaces — the spearpoint geometry lets the blade access sharp inside corners and flush details that a standard straight-edge blade can't reach.
- Versatility across grain types — effective whether you're working with end grain, cross grain, or awkward transitional surfaces.

The Sharpshooter is delivered razor-sharp, dead flat, and ready to use.

⚠️ Caution: the blade is extremely sharp. Handle with care.

Before first use: the blade must be detached from the handle to remove the factory protective wax coating. Wipe it down with a rag soaked in mineral spirits or WD-40, let the solvent dissolve the residue, then scrub gently with a non-woven pad. To protect the blade from rust going forward, apply camellia oil or a similar rust-preventative oil.

For the woodworker who demands a clean finish in every corner, this is the tool that hits its mark every time.

- Blade can be removed for easy sharpening
- Plane iron: O1 steel hardened
- Handle material: New Zealand Oak
- Approx. dimensions (L x W x H): 117 x 50 x 48 mm

Made in New Zealand