Plp 1 views Claim this Business♡

AEM's Air Inlet Temperature Sensor Kits (AIT) senses the air temperature on the inlet side of the engine.30-2010 - Air Temp Sensor Kit- Accuracy:< 1.5°C / 2.7°F- Operating Temp: -40C to 135C / -40F to 275F- Resistive Range (Ω): See Table- Thermal Time Constant:< 15 sec. The time required for the ...

Features:- A boost display gauge and boost controller in one!- Easy to program – no laptop required- Boost control solenoid and all necessary hardware included- On-board 80PSIg MAP sensor—no upgrade kit needed for high boost vehicles- Two boost level settings and scramble boost setting- Wastegat...

Note: If an alternative ECUs (like Link/Haltech ) have a configurable CAN input, the AEM gauge does have a CAN output for vehicle speed.Otherwise, the gauge also does have an optional 12v pulsed output that can be used with most aftermarket ECUs and datalogger. More information on this can be found ...

AEM’s 30-0309 X-Series 0~15PSI Digital Boost/Fuel Pressure Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost or fuel pressure readouts up to 15 PSI in their high performance supercharge...

AEM’s 30-0308 X-Series -30in/Hg~60PSI / -1~4BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 60 PSI or 4 BAR in their high performance vehicle...

AEM’s 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.NOTE: The 30-0307 comes wi...

AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as boost from 0 to up to 35PSI. The boost gauge's digital readout will auto...

AEM’s 30-0305 X-Series 0-1800F/0-1000C Digital Exhaust Gas Temperature (EGT) gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want a highly accurate EGT readout in their high performance vehicle.NOTE: The 30-0305 comes ...

AEM’s 30-0303 X-Series Digital Voltmeter gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly a accurate voltage readout in their high performance vehicle.NOTE: The 30-0303 comes with a black bezel and black 8-1...

AEM’s 30-0302 X-Series 100-300 F/40-150C Digital Gauge combine incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate water, transmission and/or oil or temperature readouts in their high performance vehicle.NOTE: The 30...

AEM’s 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.NOTE: The 30-0307 comes wi...

AEM’s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw o...

The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.The 340LPH E85-Compatib...

The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.The 340LPH E85-Compatib...

Recommended for customers with AEM V2 or Snow (Brand) Methanol Injection Kits. This kit is an upgrade to the best designed injection nozzle on the market. See video below.This is a direct swap for any methanol injection system with 1/8NPT mounting in your charge-pipe and quick hose disconnects.AEM's...

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. AEM-30-2355-250 fits 2.25" to 2.5" exhaust pipe diameters. Bung Type: For Oxyge...

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. AEM-30-2355-300fits 2.75" to 3" exhaust pipe diameters. Bung Type: For Oxygen s...

24 Tooth Cam Angle Sensor Trigger Disk – to suit stock Nissan Cam Angle Sensors / DistributorsNissan used a cam angle sensor trigger disk on RB- and SR-series engines (among others) which contained 360 very fine teeth. This gave the factory ECU accurate information with regards to crank/cam positi...

24 Tooth Cam Angle Sensor Trigger Disk – to suit stock Nissan Cam Angle Sensors / DistributorsNissan used a cam angle sensor trigger disk on RB- and SR-series engines (among others) which contained 360 very fine teeth. This gave the factory ECU accurate information with regards to crank/cam positi...

AEM Tru-Time Adjustable Cam Gears increase horsepower and torque without having to change the camshaft(s) and are must-have items for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams. Tru-Time cam gears enable users to match cam timing with th...

AEM Tru-Time Adjustable Cam Gears increase horsepower and torque without having to change the camshaft(s) and are must-have items for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams. Tru-Time cam gears enable users to match cam timing with th...

AEM Tru-Time Adjustable Cam Gears increase horsepower and torque without having to change the camshaft(s) and are must-have items for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams. Tru-Time cam gears enable users to match cam timing with th...

THE AEM DIESEL & PETROL WATER/METHANOL INJECTION SYSTEM ADVANTAGEWater/methanol injection (WMI) systems reduce air inlet temps and enhance combustion efficiency on turbo Diesel applications, which allows an engine to deliver more power with less effort. Water/methanol injection also offers a host of...

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using...